Analytical layer-element solutions of Biot’s consolidation with anisotropic permeability and incompressible fluid and solid constituents

Based on the governing equations of 2D plane-strain Biot’s consolidation, the relationship between generalized displacements and stresses of a single soil layer with anisotropic permeability and incompressible fluid and solid constituents is described by an analytical layer-element, which is deduced in the Laplace–Fourier transform domain by using the eigenvalue approach. Taking the boundary conditions and the continuity of the soil layers into consideration, a global stiffness matrix is subsequently assembled and solved. As to the 3D case, the same derivation is employed after the application of a decoupling transformation. The actual solutions in the physical domain can further be acquired by inverting the Laplace–Fourier transform. Finally, numerical examples are carried out to verify the presented theory and discuss the influence of the anisotropic permeability on the consolidation behavior.     

TBAB包络化合物浆的管内流动再层流化现象

TBAB包络化合物浆是一种新型高密度潜热输送材料,在中央空调或区域供冷等系统中作为替代常规冷水的冷量输送媒体具有显著的节能应用前景.采用实验方法研究了A型TBAB包络化合物浆在水平直管内的层流和湍流流动特性.通过分析流动阻力随流速和固相含量等参数的变化规律,发现固相含量的增加有利于维持流动的层流趋势,在定流速条件下随着固相含量的增加流动状态会由湍流转变为层流,即出现"再层流化"现象,并且由于再层流化现象的出现,包络化合物浆的流动会出现"阻力降低区".     

The preparation of a novel polydopamine-graft-poly(2-methyl-2-oxazoline) protein-resistant coating and its applications in protein separation

A novel polydopamine-graft-poly(2-methyl-2-oxazoline)(PDA-g-PMOXA) coating was prepared by immobilizing poly(2-methyl-2-oxazoline)(PMOXA) onto material surfaces through polydopamine (PDA) anchored coating for the first time.And then,the chemical composition,hydrophilicity,and protein-resistant properties of the PDA-g-PMOXA coating were studied using X-ray photoelectron spectroscopy(XPS),contact angel(CA) test,surface plasmon resonance(SPR),and quartz crystal microbalance with dissipation(QCM-D) measurement.Finally,the coating was applied to the capillary inner surface for protein separation by capillary electrophoresis(CE).     

硫属化合物半导体热电材料的电热输运协同调控

热电材料作为一种新型的清洁能源材料,能够直接实现热能和电能之间相互转换,有望为提高能源的利用率、缓解环境污染问题提供一种综合协调的选择,因此在能源危机越来越严重的21世纪,热电材料的研究引起了各国研究者的广泛兴趣。然而,电热输运的协同调制一直是一个历史性的难题。硫属化合物半导体作为最重要的一类热电材料,近年来其电热输运性质的协同调控受到了广泛的关注。本文综述了硫属化合物半导体热电材料在电热输运协同调控方面所取得的最新研究进展,分析了其电热输运协同调控及热电性能优化的内在物理机制,并展望这些新的调控策略在热电材料发展的应用前景。     

Br-掺杂Bi2WO6的水热法合成及其可见光催化性能

以Bi（NO₃）₃·5H₂O和Na₂WO₄·2H₂O为主要原料,采用水热法合成了纯相Bi₂WO₆,并对其进行非金属离子Br^-掺杂改性。采用XRD、SEM、TEM、XPS、Raman、PL和DRS研究了Br^-掺杂对Bi₂WO₆的物相结构、形貌和可见光催化性能的影响。结果表明,Br^-掺杂可有效提高Bi₂WO₆的可见光催化性能,当掺杂量（物质的量百分数）为8%时,溴掺杂Bi₂WO₆的光催化性能最好,可见光照射40 min后,可降解96.73%的罗丹明-B,与未掺杂Bi₂WO₆相比,其降解率提高了36.32%。     

一种二维多孔窗口型膦酸锆材料的合成及其对不同金属离子的吸附性能

合成了一种二维窗口型膦酸锆材料β-丙氨酸-N,N-双亚甲基膦酸锆(ZrNCP),采用X射线衍射仪、扫描电镜、透射电镜分析了合成产物的相组成和微观结构;利用N2吸脱附试验装置测定了合成产物对不同金属离子的吸附性能,考察了浓度、温度及pH对其吸附性能的影响.结果表明,合成产物内部存在大量分布均匀的微介孔,材料微观形貌为规整片状.随着金属离子半径的增大,ZrNCP对各种金属离子的平衡吸附量(mmol/g)呈逐渐减小趋势.     

Vitrifolin A: A Norlabdane Diterpenoid from the Fruits of Vitex trifolia Linn. var. simplicifolia Cham

A new norlabdane diterpenoid, named vitrifolin A, was isolated from the fruits of Vitex trifolia Linn. var. simplicifolia Cham. Its structure was elucidated by mean of spectroscopic methods, including HRESIMS, IR, 1D and 2D NMR. The inhibitory effect of vitrifolin A on nitric oxide production in lipopolysaccarideactivated mouse macrophages was also evaluated.     

New Steroidal Saponins from the Leaves of Yucca elephantipes

Two new spirostanol saponins, namely elephanosides G and H ( 1 and 2 , resp.) were isolated from the leaves of Yucca elephantipes (Agavaceae), together with the two known furostanol saponins 3 and 4 and the six known flavonoid O‐ and C‐glycosides 5 – 10 . The new structures were elucidated as (3β,25S)‐spirost‐5‐en‐3‐yl O‐β‐D ‐glucopyranosyl‐(1→3)‐O‐β‐D ‐glucopyranosyl‐(1→4)‐β‐D ‐galactopyranoside ( 1 ) and (3β,5β,25R)‐3‐[(2‐O‐β‐D ‐glucopyranosyl‐β‐D ‐galactopyranosyl)oxy]spirostan‐12‐one ( 2 ) on the basis of detailed spectroscopic analysis and acidic hydrolysis.     

Modified silver staining in 2DE improves protein detection even at extremely low sample concentration

The typical concentration of protein loaded varies from 0.13 to 1.40 μg/μL for a classical silver staining method in 2DE gel. Here, we present a simple modified classical silver staining method by modifying the silver impregnation and development reaction steps. This modified method detects the protein spots at extremely low loaded concentrations, ranging from 0.0048 to 0.0480 μg/μL. We recommend this modified silver staining as an excellent method for the limited biological samples used for silver‐stained 2DE analysis. Altogether, the protocol takes close to two days from first dimension separation to second dimension separation, followed by silver staining, scanning, and analysis.