High Molar Extinction Coefficient Organic Sensitizers for Efficient Dye‐Sensitized Solar Cells

We have designed and synthesized highly efficient organic sensitizers with a planar thienothiophene–vinylene–thienothiophene linker. Under standard global AM 1.5 solar conditions, the JK‐113 ‐sensitized cell gave a short circuit photocurrent density (J_sc) of 17.61 mA cm^?2, an open‐circuit voltage (V_oc) of 0.71 V, and a fill factor (FF) of 72 %, corresponding to an overall conversion efficiency (η) of 9.1 %. The incident monochromatic photo‐to‐current conversion efficiency (IPCE) of JK‐113 exceeds 80 % over the spectral region from 400 to 640 nm, reaching its maximum of 93 % at 475 nm. The band tails off toward 770 nm, contributing to the broad spectral light harvesting. Solar‐cell devices based on the sensitizer JK‐113 in conjunction with a volatile electrolyte and a solvent‐free ionic liquid electrolyte gave high conversion efficiencies of 9.1 % and 7.9 %, respectively. The JK‐113 ‐based solar cell fabricated using a solvent‐free ionic liquid electrolyte showed excellent stability under light soaking at 60 °C for 1000 h.     

Bright blue phosphorescence from cationic bis-cyclometalated iridium(III) isocyanide complexes

We report new bis-cyclometalated cationic iridium(III) complexes [(C(^)N)(2)Ir(CN-tert-Bu)(2)](CF(3)SO(3)) that have tert-butyl isocyanides as neutral auxiliary ligands and 2-phenylpyridine or 2-(4'-fluorophenyl)-R-pyridines (where R is 4-methoxy, 4-tert-butyl, or5-trifluoromethyl) as C(^)N ligands. The complexes are white or pale yellow solids that show irreversible reduction and oxidation processes and have a large electrochemical gap of 3.58-3.83 V. They emit blue or blue-green phosphorescence in liquid/solid solutions from a cyclometalating-ligand-centered excited state. Their emission spectra show vibronic structure with the highest-energy luminescence peak at 440-459 nm. The corresponding quantum yields and observed excited-state lifetimes are up to 76% and 46 μs, respectively, and the calculated radiative lifetimes are in the range of 46-82 μs. In solution, the photophysical properties of the complexes are solvent-independent, and their emission color is tuned by variation of the substituents in the cyclometalating ligand. For most of the complexes, an emission color red shift occurs in going from solution to neat solids. However, the shift is minimal for the complexes with bulky tert-butyl or trifluoromethyl groups on the cyclometalating ligands that prevent aggregation. We report the first example of an iridium(III) isocyanide complex that emits blue phosphorescence not only in solution but also as a neat solid.     

Evaluation of a ruthenium oxyquinolate architecture for dye-sensitized solar cells

Synthesis of the [Ru(dcbpy)(2)(OQN)](+) complex is reported in which dcbpy and OQN(-) are the bidentate 4,4'-dicarboxy-2,2'-bipyridyl and 8-oxyquinolate ligands, respectively. Spectroscopic, electrochemical, and theoretical analyses are indicative of extensive Ru(OQN) molecular orbital overlap due to degenerate Ru d(π) and OQN p(π) mixing. [Ru(dcbpy)(2)(OQN)](+) displays spectroscopic properties remarkably similar to those of the N3 dye, making it a promising candidate for application in dye-sensitized solar cell devices. However, its solar power conversion efficiency requires further optimization.     

Influence of halogen atoms on a homologous series of bis-cyclometalated iridium(III) complexes

A series of homologous bis-cyclometalated iridium(III) complexes Ir(2,4-di-X-phenyl-pyridine)(2)(picolinate) (X = H, F, Cl, Br) HIrPic, FIrPic, ClIrPic, and BrIrPic has been synthesized and characterized by NMR, X-ray crystallography, UV-vis absorption and emission spectroscopy, and electrochemical methods. The addition of halogen substituents results in the emission being localized on the main cyclometalated ligand. In addition, halogen substitution induces a blue shift of the emission maxima, especially in the case of the fluoro-based analogue but less pronounced for chlorine and bromine substituents. Supported by ground and excited state theoretical calculations, we rationalized this effect in a simple manner by taking into account the σp and σm Hammett constants on both the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) energy levels. Furthermore, in comparison with FIrPic and ClIrPic, the impact of the large bromine atom remarkably decreases the photoluminescence quantum yield of BrIrPic and switches the corresponding lifetime from mono to biexponential decay. We performed theoretical calculations based on linear-response time-dependent density functional theory (LR-TDDFT) including spin-orbit coupling (SOC), and unrestricted DFT (U-DFT) to obtain information about the absorption and emission processes and to gain insight into the reasons behind this remarkable change in photophysical properties along the homologous series of complexes. According to theoretical geometries for the lowest triplet state, the large halogen substituents contribute to sizable distortions of specific phenylpyridine ligands for ClIrPic and BrIrPic, which are likely to play a role in the emissive and nonradiative properties when coupled with the heavy-atom effect.     

Facile preparation of large aspect ratio ellipsoidal anatase TiO2 nanoparticles and their application to dye-sensitized solar cell

A simple one-step heat-treatment of peroxotitanate complex aqueous solution at around 100 °C was resulted in the formation of ellipsoidal anatase TiO₂ nanoparticles having a high aspect ratio with no branches. The length of these ellipsoidal TiO₂ falls in the range of 200–350 nm, depending on mole ratio of Ti⁴⁺/H₂O₂. Dye-sensitized solar cell based on these ellipsoidal nanocrystalline TiO₂ as photoanode was fabricated and characterized.     

Acid-base properties of the N3 ruthenium(ii) solar cell sensitizer: a combined experimental and computational analysis

We report a combined spectro-photometric and computational investigation of the acid-base equilibria of the N3 solar cell sensitizer [Ru(dcbpyH(2))(2)(NCS)(2)] (dcbpyH(2) = 4,4'-dicarboxyl-2,2' bipyridine) in aqueous/ethanol solutions. The absorption spectra of N3 recorded at various pH values were analyzed by Single Value Decomposition techniques, followed by Global Fitting procedures, allowing us to identify four separate acid-base equilibria and their corresponding ground state pK(a) values. DFT/TDDFT calculations were performed for the N3 dye in solution, investigating the possible relevant species obtained by sequential deprotonation of the four dye carboxylic groups. TDDFT excited state calculations provided UV-vis absorption spectra which nicely agree with the experimental spectral shapes at various pH values. The calculated pK(a) values are also in good agreement with experimental data, within <1 pK(a) unit. Based on the calculated energy differences a tentative assignment of the N3 deprotonation pathway is reported.     

Convergent synthesis of near-infrared absorbing, "push-pull", bisthiophene-substituted, zinc(II) phthalocyanines and their application in dye-sensitized solar cells

Zinc(II) phthalocyanine dyes that contain triarylamine-terminated bisthiophene and hexylbisthiophene groups have been synthesized by a convergent approach by using carboxytriiodo-ZnPc as a precursor. Further transformation of the iodo groups by a Pd-catalyzed reaction allowed easy preparation of further extended π-conjugated carboxy-ZnPcs. These dyes have been used as sensitizers in dye-sensitized solar cells, which exhibit a panchromatic response and moderate overall efficiencies.     

Molecular engineering of organic sensitizers for solar cell applications

Novel organic sensitizers comprising donor, electron-conducting, and anchoring groups were engineered at molecular level and synthesized. The functionalized unsymmetrical organic sensitizers 3-{5-[N,N-bis(9,9-dimethylfluorene-2-yl)phenyl]-thiophene-2-yl}-2-cyano-acrylic acid (JK-1) and 3-{5'-[N,N-bis(9,9-dimethylfluorene-2-yl)phenyl]-2,2'-bisthiophene-5-yl}-2-cyano-acrylic acid (JK-2), upon anchoring onto TiO2 film, exhibit unprecedented incident photon to current conversion efficiency of 91%. The photovoltaic data using an electrolyte having composition of 0.6 M M-methyl-N-butyl imidiazolium iodide, 0.04 M iodine, 0.025 M LiI, 0.05 M guanidinium thiocyanate, and 0.28 M tert-butylpyridine in a 15/85 (v/v) mixture of valeronitrile and acetonitrile revealed a short circuit photocurrent density of 14.0 +/- 0.2 mA/cm2, an open circuit voltage of 753 +/- 10 mV, and a fill factor of 0.76 +/- 0.02, corresponding to an overall conversion efficiency of 8.01% under standard AM 1.5 sunlight. DFT/TDDFT calculations have been performed on the two organic sensitizers to gain insight into their structural, electronic, and optical properties. Our results show that the cyanoacrylic acid groups are essentially coplanar with respect to the thiophene units, reflecting the strong conjugation across the thiophene-cyanoacrylic groups. Molecular orbitals analysis confirmed the experimental assignment of redox potentials, while TDDFT calculations allowed assignment of the visible absorption bands.     

Effects of lipopolysaccharide-induced inflammation on expression of growth-associated genes by corticospinal neurons

Background  

Inflammation around cell bodies of primary sensory neurons and retinal ganglion cells enhances expression of neuronal growth-associated genes and stimulates axonal regeneration. We have asked if inflammation would have similar effects on corticospinal neurons, which normally show little response to spinal cord injury. Lipopolysaccharide (LPS) was applied onto the pial surface of the motor cortex of adult rats with or without concomitant injury of the corticospinal tract at C4. Inflammation around corticospinal tract cell bodies in the motor cortex was assessed by immunohistochemistry for OX42 (a microglia and macrophage marker). Expression of growth-associated genes c-jun, ATF3, SCG10 and GAP-43 was investigated by immunohistochemistry or in situ hybridisation.