微反应器和微聚合反应器

微反应器是指容量仅为零点几μm^3或宽度为1μm左右的反应“容器”，反应在这个微小区域内有控地进行。以表面科学与微制造技术为核心，新型微反应器近年来发展很快。本文介绍五种微反应器，即反相胶束微反应器，聚合物微反应器，固体模板微反应器，微条纹反应器和微聚合反应器，以及它们在各高科技领域中的可能应用。     

Rapid and sensitive determination of ephedrine and pseudoephedrine by micellar electrokinetic chromatography with on-line regenerating covalent coating

A rapid, sensitive and reproducible micellar electrokinetic chromatographic method using hexamethyldisilazane as on-line regenerating covalent coating was developed for the quantification of ephedrine (E) and pseudoephedrine (PE). E and PE were derivatized with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazol for laser-induced fluorescence detection. The on-line regenerating covalent coating formed a combinative double coating with the subsequently produced dynamic SDS coating. The total coating can be easily removed and conveniently regenerated on-line. The simple coating procedure was described. By a series of optimization, a running buffer of 20 mm Na(2)B(4)O(7) + 16 mm SDS was applied for the separation of the derivatives. Linear relationships for E and PE were obtained in the range of 0.044-6.60 microg mL(-1) (correlation coefficients: 0.9975 for E, 0.9981 for PE), and the detection limits for E and PE were 1.71 and 0.67 ng mL(-1), respectively. The separation speed, the reproducibility and the sensitivity were much improved over those of other capillary electrophoresis methods more recently reported. The method was applied to the analysis of the two alkaloids in traditional herbal preparations with recoveries in the range 92.8-104.8%.     

A Facile Three-Component One-Pot Synthesis of Structurally Constrained Tetrahydrofurans, Which Are t-RNA Synthetase Inhibitor Analogues

A one-pot procedure for the efficient synthesis of a small library of t-RNA inhibitor analogues was developed. Thus,Rh2(OAc)4 catalyzed three-component 1,3-dipolar cycloaddition reactions of carbonyl ylides derived from diazoindan-1,3-dione and aldehydes with other dipolarophiles in 1,1,2,2-tetrachloroethane at 80 ℃ gave ring fused tetrahydrofurans having three stereocenters in good yield.     

Lanthanide-transition-metal carbonyl complexes. 1. Syntheses and structures of ytterbium(II) solvent-separated ion pairs and isocarbonyl polymeric arrays of tetracarbonylcobaltate

Transmetalation reactions of metallic ytterbium with Hg[Co(CO)(4)](2) in the coordinating solvents pyridine and THF yield the solvent-separated ion pairs [Yb(L)(6)] [Co(CO)(4)](2) (1a, L = Pyr; 2a, L = THF). The IR spectrum of 1a in pyridine indicates that the tetracarbonylcobaltate anion is not directly bonded to the divalent Yb cation owing to the strong coordinating ability of pyridine. On the other hand, IR spectra of 2a in THF are concentration dependent. In dilute solutions there is an equilibrium between the solvent-separated ion pair and a weak contact ion pair. Higher concentrations of 2a facilitate the formation of a tight ion pair that has a low-frequency isocarbonyl absorption. Remarkably, complexes 1a and 2a are easily transformed in toluene into the two-dimensional sheetlike arrays [(Pyr)(4)Yb[(mu-CO)(2)Co(CO)(2)](2)](infinity) (1b) and [(THF)(2)Yb[(mu-CO)(3)Co(CO)](2).Tol](infinity) (2b). The two-dimensional frameworks are supported by isocarbonyl linkages. Infrared spectra of toluene solutions substantiate the existence of the isocarbonyl bridges with low-frequency absorptions at 1780 cm(-1). Compounds 1b and 2b belong to a rare class of lanthanide-transition-metal carbonyl extended arrays, only three others of which have been structurally established. Dissolving 1b in pyridine regenerates 1a, but the complete conversion of 2b into 2a cannot be achieved. Crystal data: 1a.Pyr is monoclinic, P2(1)/c, a = 11.171(1) A, b = 11.925(1) A, c = 33.978(1) A, beta = 95.10(1) degrees, Z = 4; 2a is monoclinic, C2/c, a = 17.724(1) A, b = 12.468(1) A, c = 18.413(1) A, beta = 100.34(1) degrees, Z = 4; 1b is monoclinic, C2/c, a = 11.047(1) A, b = 13.423(1) A, c = 21.933(1) A, beta = 103.49(1) degrees, Z = 4; 2b is monoclinic, C2/c, a = 28.589(1) A, b = 7.223(1) A, c = 14.983(1) A, beta = 118.90(1) degrees, Z = 4.     

Solvent effects on infrared spectra of methyl 4-hydroxybenzoate in pure organic solvents and in ethanol/CCl4 binary solvents

Infrared spectroscopy studies of methyl 4-hydroxybenzoate (MHB) in 17 different organic solvents and in ethanol/CCl4 binary solvent were undertaken to investigate the solvent-solute interactions. The frequencies of carbonyl stretching vibration nu(C=O) of MHB in single solvents were correlated with the solvent acceptor number (AN) and the linear solvation energy relationships (LSER). The assignments of the two bands of nu(C=O) of MHB in alcohols and the single one of that in non-alcoholic solvents were discussed. The shifts of nu(C=O) of MHB in ethanol/CCl4 binary solvents showed that several kinds of solute-solvent hydrogen bonding interactions coexisted in the mixture solvents, with a change in the mole fraction of ethanol in the binary solvents.     

Chromogenic reaction of bromopyrogallol red with tri- and hexavalent chromium in the presence of cetyltrimethyl ammonium bromide and its application in Cr speciation

The coordination reactions of bromopyrogallol red (BPR) with tri- and hexavalent chromium in the presence of cetyltrimethylammonium bromide (CTAB) have been studied by absorption spectrometry. Results show that the reactions of Cr(VI) and Cr(III) with BPR in the absence or presence of CTAB have different temperature dependences. The reaction mechanism of Cr(VI) is that Cr(VI) is first reduced by BPR to Cr(III) and then the Cr(III) produced reacts with BPR. Based on the study on the coordination reactions and the effects of surfactants upon them, a simple, rapid, sensitive and accurate method for Cr speciation has been developed. Over the range of 0–8 g Cr(VI) or 0–12g Cr(III) per 25ml final volume, the calibration curve is linear with a detection limit of 3.5 × 10^–7 mol/1 for Cr(VI) or 4.4 × 10^–7 mol/1 for Cr(III).     

N-甲基苯胺、二苯胺与质子受体相互作用的研究

测量了N-甲基苯胺、二苯胺与一些极性非质子溶剂（B）在CCl_4中的红外光谱，观察到这两种劳胺均与所研究的质子受体发生了氢键交叉缔合作用，并利用光谱数据计算了相应缔合物的形成常数和部分氢键能．结果表明，二苯胺是比N-甲基苯胺更强的质子供体，非质子溶剂的极性、空间效应和不同成键原子对交叉缔合物的稳定性均有一定的影响．还从分子结构对有关结果进行了讨论.     

Separation and determination of carnosine-related peptides using capillary electrophoresis with laser-induced fluorescence detection

A capillary electrophoresis (CE) method with laser-induced fluorescence (LIF) detection was developed for the separation and detection of carnosine-related peptides (carnosine, anserine, and homocarnosine). A sensitive and fluorogenic regent, 3-(4-carboxybenzoyl) quinoline-2-carboxaldehyde (CBQCA) was selected as a precapillary labeling reagent for imidazole dipeptides to form isoindole derivatives. The optimized molar ratio between CBQCA and peptide was found to be 75:1, and 50 mmol/L borate buffer (pH 9.2) was used for the derivatization in order to achieve good efficiency. Three imidazole dipeptides were baseline-separated within 20 min by using 112 mmol/L sodium borate (pH 10.4-10.8) as running buffer. Concentration detection limits (signal-to-noise ratios) for carnosine, anserine, and homocarnosine were 4.73, 4.37, and 3.94 nmol/L, respectively. This method has been applied to the analysis of human cerebrospinal fluid (CSF) and meat dry powder of pig and sheep. Recoveries were in the range of 82.9-104.8% for homocarnosine in CSF. For carnosine and anserine, the recoveries are 98.3% and 80.2% in meat dry powder of pig and 111.2% and 112.8% in meat dry powder of sheep, respectively.     

Curing behavior and toughening performance of epoxy resins containing hyperbranched polyester

The effects of the hyperbranched polyester with hydroxyl end groups (HBPE‐OH) on the curing behavior and toughening performance of a commercial epoxy resin (diglycidyl ether of bisphenol A, DGEBA) were presented. The addition of HBPE‐OH into DGEBA strongly increased its curing rate and conversion of epoxide group due to the catalytic effect of hydroxyl groups in HBPE‐OH and the low viscosity of the blend at curing temperature. The improvements on impact strength and critical stress intensity factor (or fracture toughness, K_1c) were observed with adding HBPE‐OH. The impact strength was 8.04 kJ m^?1 when HBPE‐OH reached 15 wt% and the K_1c value was approximately two times the value of pure epoxy resin when HBPE‐OH content was 20 wt%. The morphology of the blends was also investigated, which indicated that HBPE‐OH particles, as a second phase in the epoxy matrix, combined with each other as the concentration of HBPE‐OH increased. Copyright © 2004 John Wiley & Sons, Ltd.