Unraveling the Impact of Gold(I)–Thiolate Motifs on the Aggregation‐Induced Emission of Gold Nanoclusters

Aggregation‐induced emission (AIE) provides an efficient strategy to synthesize highly luminescent metal nanoclusters (NCs), however, rational control of emission energy and intensity of metal NCs is still challenging. This communication reveals the impact of surface Au^I‐thiolate motifs on the AIE properties of Au NCs, by employing a series of water‐soluble glutathione (GSH)‐coordinated Au complexes and NCs as a model ([Au₁₀SR₁₀], [Au₁₅SR₁₃], [Au₁₈SR₁₄], and [Au₂₅SR₁₈]^?, SR=thiolate ligand). Spectroscopic investigations show that the emission wavelength of Au NCs is adjustable from visible to the near‐infrared II (NIR‐II) region by controlling the length of the Au^I‐SR motifs on the NC surface. Decreasing the length of Au^I‐SR motifs also changes the origin of cluster luminescence from AIE‐type phosphorescence to Au⁰‐core‐dictated fluorescence. This effect becomes more prominent when the degree of aggregation of Au NCs increases in solution.     

De Novo Construction of Catenanes with Dissymmetric Cages by Space‐Discriminative Post‐Assembly Modification

Considerable efforts have been made to increase the topological complexity of mechanically interlocked molecules over the years. Three‐dimensional catenated structures composed of two or several (usually symmetrical) cages are one representative example. However, owing to the lack of an efficient universal synthetic strategy, interlocked structures made up of dissymmetric cages are relatively rare. Since the space volume of the inner cavity of an interlocked structure is smaller than that outside it, we developed a novel synthetic approach with the voluminous reductant NaBH(OAc)₃ that discriminates this space difference, and therefore selectively reduces the outer surface of a catenated dimer composed of two symmetric cages, thus yielding the corresponding catenane with dissymmetric cages. Insight into the template effect that facilitates the catenation of cages was provided by computational and experimental techniques.     

用实体手当作教学模型的尝试

介绍了在有机化学教学实践中总结的用实体手当作教学模型的三方面实例。该方法简便、快捷实用,可以方便学生的学习。     

关于两个图的一类新连接图的谱

给定2个图G1和G2,设G1的边集E(G1)={e1,e2,?,em1},则图G1⊙G2可由一个G1,m1个G2通过在G1对应的每条边外加一个孤立点,新增加的点记为U={u1,u2,?,um1},将ui分别与第i个G2的所有点以及G1中的边ei的端点相连得到,其中i=?1,2,?,m1。得到：（i）当G1是正则图,G2是正则图或完全二部图时,确定了G1⊙G2的邻接谱（A-谱）。（ii）当G1是正则图,G2是任意图时,给出了G1⊙G2的拉普拉斯谱（L-谱）。（iii）当G1和G2都是正则图时,给出了G1⊙G2的无符号拉普拉斯谱（Q-谱）。作为以上结论的应用,构建了无限多对A-同谱图、L-同谱图和Q-同谱图;同时当G1是正则图时,确定了G1⊙G2支撑树的数量和Kirchhoff指数。     

片段化森林中檵木幼苗种内叶经济性状变异及其驱动因子

在异质性生境中,种内功能性状变异有助于植物对环境的适应,进而影响种群更新、群落构建和生态系统过程。探讨了种内叶经济性状的变异及受生境异质性的塑造情况。以千岛湖片段化生境中的常见种檵木（Loropetalum chinense）的幼苗为研究对象,测定了200株檵木幼苗个体水平的7个叶经济性状（比叶面积SLA、叶全碳量C、叶全氮量N等）及其对应的生境因子（郁闭度、土壤全碳量、土壤全氮量等）,采用相关性检验、主成分分析和线性混合效应模型等方法探讨片段化森林中檵木幼苗的种内叶经济性状变异及生境异质性对该变异的驱动作用。结果显示：（1） 在7个叶经济性状所构成的21对相关性分析中,有12对显著相关。经主成分分析降维后,主成分1（PC1）占性状总变异的43.02%,主要与比叶面积、叶绿素浓度、叶全氮量呈正相关,与叶干物质质量分数和叶碳氮比呈负相关,体现了檵木的种内叶经济谱,可反映叶片的最大光合效率。（2）片段化对生境条件和叶经济性状均有影响。岛屿森林群落的郁闭度显著低于大陆。相对于大陆,岛屿中的檵木幼苗趋向于更小的PC1值（缓慢投资-收益策略）;大岛边缘较大岛内部偏向于更小的PC1值。（3）生境因子中,郁闭度对PC1具有显著正效应。研究表明,片段化生境中的檵木在幼苗阶段存在叶经济谱,生境片段化可通过影响生境条件进而改变檵木幼苗的叶经济性状。随着生境片段化程度的加剧,檵木幼苗的叶经济性状逐渐向缓慢投资-收益策略靠拢。     

尿素作为添加剂低温制备高活性的TiO2光催化剂

以钛酸丁酯为原料,尿素作为添加剂,在酸性水溶液中室温制备了稳定透明的TiO2水溶胶。经过300℃低温焙烧2 h,得到了由锐钛矿和金红石组成的TiO2混晶。用XRD、FT-IR对催化剂进行了表征。以甲基橙为降解对象研究了TiO2的光催化活性,实验结果显示所制备的TiO2具有比Degussa P25更高的催化活性,15m in后的降解率达到了78%(P25,58%)。考察了尿素添加量以及焙烧温度对TiO2催化性能的影响,当尿素与钛酸丁酯物质的量之比为3∶1,300℃下焙烧2 h为较适宜的催化剂制备条件。初步探讨了尿素作为添加剂在低温制备高活性TiO2过程中的作用。     

Synthesis, Crystal Structure, Fluorescent and Thermal Properties of Sodium Tridecafluorodizirconate Na5Zr2F13 Compound

1 INTRODUCTION Considerable research effort on the heavy metal fluoride glasses like barium, zirconium fluoride and a series of rare-earth fluorozirconate compounds du- ring the last two decades was initiated by the broad optical transmission window of these glasses and thereby the potential for ultralow-loss optical fi- bers[1~10]. The fluorozirconate of alkali metals was first reported in 1938[11], and most of the sodium and potassium fluorozirconates were reported amongthe 1940s and 19…     

负载茜素红S的纳米磁性碳粉修饰电极测定牛白蛋白

采用化学沉积法在纳米碳粉上合成磁性Fe3O4颗粒,纳米碳粉吸附茜素红S后通过磁力附着在石墨电极上,制成了负载茜素红S的纳米磁性碳粉修饰电极。研究了该电极在0.014 mol/L H2SO4-0.2 mol/L KC l溶液中对ARS-牛白蛋白的电还原作用,考察了多种实验条件对峰电流的影响。在-0.45 V电位下,牛白蛋白浓度在1.5×10-8~9×10-7mol/L范围内与线性扫描伏安法还原电流成反比,从而实现对牛白蛋白的测定,并初步研究了电化学反应机理。此方法制成的磁性纳米颗粒修饰电极集分离、富集、测定和更新于一体,具有更新方便的特点。     

漂移管工作温度对离子迁移率谱的影响

离子迁移率、反应物离子的种类和产量与漂移管工作温度有很大的关系。本研究在不同温度下进行了离子迁移率实验,结果表明,离子迁移率随温度的升高而增大,而提高工作温度可以减少水分子对产物离子的影响,有利于改善系统检测的分辨率;选择合适漂移管工作温度,能有效地增加反应物离子的产量,从而提高系统检测的灵敏度和选择性。