Synthesis of Highly Sensitive Fluorescent Probe Based on Tetrasubstituted Imidazole and Its Application for Selective Detection of Ag+ Ion in Aqueous Media

A small molecule fluorescent probe, 4-[2-(4-chlorophenyl)-4,5-diphenyl-1H-imidazol-1-yl]aniline(L) for detecting Ag⁺ ion was gently synthesized via one-pot multi-component reaction catalyzed by H₃[PW₁₂O₄₀] under solvent-free microwave irradiation. When the concentration of Ag⁺ ion changed from 0 to 8.0×10⁻⁶ mol/L in the solution of H₂O/CH₃OH(19:1, volume ratio), the fluorescence emission spectrum was blue-shifted and accompanied by a gradual increase in fluorescence intensity with a low detection limit of 3.0×10⁻¹¹ mol/L. Moreover, UV-Vis absorption titration experiment demonstrated a 1:1 stoichiometric ratio and an association constant of (9.95±0.44)×10⁵ L/mol between probe L and Ag⁺ ion, and thus their complexation mechanism was also proposed and verified. More importantly, this fluorescent probe was remarkably specific for Ag⁺ ion under the interference of other metal ions and exhibited a wide pH application range of 4.0-8.0. Additionally, preliminary application of this probe was also carried out and satisfactory results were shown.     

Nucleon aPF2 Superfluid Pairing Gap in Asymmetry Nuclear Matter

The 3 P F2 superfluidity of neutron and proton is investigated in isospin-asymmetric nuclear matter within the Brueckner-Hartree-Fock approach and the BCS theory by adopting the Argonne V14 and the Argonne V18 nucleonnucleon interactions. We find that pairing gaps in the 3PF2 channel predicted by adopting the AV14 interaction are much larger than those by the AV18 interaction. As the isospin-asymmetry increases, the neutron 3 pF2 superfluidity is found to increase rapidly, whereas the proton one turns out to decrease and may even vanish at high enough asymmetries. As a consequence, the neutron 3pF2 superfluidity is much stronger than the proton one at high asymmetries and it predominates over the proton one in dense neutron-rich matter.     

Bulk Modulus and Electronic Band Structure of ZnGa2X4(X=S,Se): a First-Principles Study

First-principles local density functional calculations are presented for the compounds ZnGa₂X₄ (X=S,Se). We investigate the bulk moduli and electronic band structures in a defect chalcopyrite structure. The lattice constants and internal parameters are optimized. The electronic structures are analysed with the help of total and partial density of states. The relation between the cohesive energy and the unit cell volume is obtained by fully relaxed structures. We derive the bulk modulus of ZnGa₂X₄ by fitting the Birch-Murnaghan's equation of state. The extended Cohen's empirical formula agrees well with our ab initio results.     

Friction Properties of Bio-mimetic Nano-fibrillar Arrays

Nano-fibrillar arrays are fabricated using polystyrene materials. The average diameter of each fiber is about 300 nm. Experiments show that such a fibrillar surface possesses a relatively hydrophobie feature with a water contact angle of 142°. Nanoscale friction properties are mainly focused on. It is found that the friction force of polystyrene nano-fibrillar surfaces is obviously enhanced in contrast to polystyrene smooth surfaces. The apparent coefficient of friction increases with the applied load, but is independent of the scanning speed. An interesting observation is that the friction force increases almost linearly with the real contact area, which abides by the fundamental Bowden-Tabor law of nano-seale friction.     

Bulk Modulus and Electronic Band Structure of ZnGa2Xa （X=S,Se）： a First-Principles Study

First-principles local density functional calculations are presented for the compounds ZnGa2X4 （X = S, Se）. We investigate the bulk moduli and electronic band structures in a defect chalcopyrite structure. The lattice constants and internal parameters are optimized. The electronic structures are analysed with the help of total and partial density of states. The relation between the cohesive energy and the unit cell volume is obtained by fully relaxed structures. We derive the bulk modulus of ZnGa2Xa by fitting the Birch-Murnaghan＇s equation of state. The extended Cohen＇s empirical formula agrees well with our ab initio results.     

高效液相色谱-质谱联用技术测定人血浆中双氢青蒿素的含量

建立了测定人血浆中的双氢青蒿素的液相色谱 -质谱联用法。色谱条件 :AlltimaC18 柱 (2.1×150mm ,5μm ,流动相 :甲醇 -水 (体积比85∶15) ;流速 :0.2mL/min ;柱温 :25℃ ;进样量 :20μL。质谱条件 :电喷雾离子源 (ESI) ;用于定量分析的离子分别为m/z307(双氢青蒿素) ,m/z275(蒿甲醚 )。样品用液 -液萃取方法处理。双氢青蒿素的线性范围为5～200μg·L -1,定量下限为5μg·L -1,日内、日间精密度 (RSD)均小于10 % ,萃取回收率在71.5 %～83.2 %之间 (n=5) ,分析方法回收率在98.4 %～101.9 %之间 (n=5)。本法操作简便、准确、灵敏度高 ,适用于双氢青蒿素的药代动力学研究     

增塑剂对可吸收缝合线后处理工艺条件和降解性能的影响

分别在对二氧环己酮均聚物和对二氧环己酮-乙交酯共聚物中加入增塑剂进行纺丝,制得聚对二氧环己酮单丝缝合线(PDS)和对二氧环己酮-乙交酯共聚物单丝缝合线(PDG).用DSC方法研究了增塑剂含量对PDS缝合线热性能的影响和不同热定型条件的PDG缝合线的热性能,测试了热定型温度对PDG缝合线初始强度、模量及柔量的影响,考察了增塑剂含量对两种缝合线的生物降解性能和力学降解性能影响.研究结果表明,PDS缝合线的玻璃化转变温度Tg、结晶温度Tc以及熔融温度Tm均随着增塑剂含量的增加而降低,但其结晶能力增加.随着热定型温度的增加,PDG缝合线的初始打结强度、熔融热均提高,熔融温度Tm基本保持不变.两种缝合线的强度保留率随着增塑剂含量的增加均先增加后减小,而重量保留率随着增塑剂含量增加始终减小.     

乙二胺溶剂热还原法制备碳纳米管

以乙二胺作为溶剂和碳源,用KBH4还原NiCl2得到的镍作为催化剂,于300℃制备碳纳米管。X-射线衍射(XRD)、透射电子显微镜(TEM)、选区电子衍射(SAED)和Raman光谱分析证明,产品为多壁碳纳米管,直径约为100nm,长度达几微米。该方法具有反应温度低、反应时间短、操作简便等特点。     

pH指示剂吸光度比法测定喷昔洛韦钠原料药含量

本文采用pH指示剂吸光度比法测定喷昔洛韦钠原料药的含量,并与紫外分光光度法和高效液相色谱法两种方法进行了比较。该法简单、准确、快速、灵敏且重现性好,有应用前景。     

Cr-AlPO4-5的合成及其对苯直接氧化制苯酚反应的催化性能

 以Cr(NO3)3为Cr源用水热法合成了Cr-AlPO4-5分子筛,并用XRD,FT-IR和XPS对分子筛进行了表征. 结果表明,Cr已进入到Cr-AlPO4-5分子筛骨架结构中; 焙烧后分子筛样品的L酸中心和B酸中心数量均大幅度增加,Cr主要以Cr(Ⅴ)形式存在. 将分子筛样品用于催化H2O2氧化苯制苯酚反应,苯酚收率最高可达4.7%,选择性可达99.5%以上. 非骨架Cr物种是导致H2O2无效分解和选择性下降的主要因素,而骨架Cr物种是反应的活性中心. 提出了以骨架Cr过氧化物为中间物种的可能的反应机理,并用原位红外光谱初步验证了中间物种的存在.