New supported beta-amino alcohols as efficient catalysts for the enantioselective addition of diethylzinc to benzaldehyde under flow conditions

[formula: see text] Polymeric monoliths 10 containing an amino alcohol moiety derived from an industrial waste material represent one of the best ligands for the enantioselective catalytic addition of ZnEt2 to benzaldehyde (99% ee), being recoverable and usable under flow conditions.     

非负载镍催化剂的2-乙基蒽醌加氢活性及其氢吸脱附性质

 分别制备了金属镍粉、兰尼镍、Ni-B非晶态合金及镧掺杂的Ni-B非晶态合金(Ni-B-La)催化剂,研究了催化剂的氢吸附和脱附性质以及对2-乙基蒽醌加氢反应的催化性能. 结果表明,金属镍粉、兰尼镍和Ni-B催化剂表面均具有两种氢吸附位: 弱吸附位和强吸附位. Ni-B-La催化剂表面只有氢的强吸附位,其强吸附氢量与兰尼镍相当. 推测只有氢的强吸附位是2-乙基蒽醌加氢反应的活性中心,并且Ni-B-La催化剂上的强吸附氢较兰尼镍上的更活泼,因而Ni-B-La非晶态合金催化剂对加氢反应的催化活性高于兰尼镍.     

Cr-AlPO4-5的合成及其对苯直接氧化制苯酚反应的催化性能

 以Cr(NO3)3为Cr源用水热法合成了Cr-AlPO4-5分子筛,并用XRD,FT-IR和XPS对分子筛进行了表征. 结果表明,Cr已进入到Cr-AlPO4-5分子筛骨架结构中; 焙烧后分子筛样品的L酸中心和B酸中心数量均大幅度增加,Cr主要以Cr(Ⅴ)形式存在. 将分子筛样品用于催化H2O2氧化苯制苯酚反应,苯酚收率最高可达4.7%,选择性可达99.5%以上. 非骨架Cr物种是导致H2O2无效分解和选择性下降的主要因素,而骨架Cr物种是反应的活性中心. 提出了以骨架Cr过氧化物为中间物种的可能的反应机理,并用原位红外光谱初步验证了中间物种的存在.     

Small Peptides Catalyzed Direct Aldol Reactions of Aldehydes with Hydroxyacetone with Regiocontrol in Aqueous Media

Very recently, we[1] found that L-proline amides and dipeptides acted as efficient catalysts for the asymmetric direct aldol reaction. We report here that L-proline-based peptides 1～5 can catalyze the aldol reactions of hydroxyacetone with aldehydes 6 in aqueous media, to give 1,4-diols (7), the disfavored products with either aldolase or L-proline. Both peptides 3 and 4 give good results.     

Structural Determination of Bis-histidinopeptide Zinc Complexes by 15N NMR (HMBC) Spectra

Polynitrogen receptors such as bis-histidine peptides possess strong ability to bind metals, which play much important roles in medicinal, bioinorganic, bioorganic, biomimetic and supramolecular chemistry. In order to investigate the interaction of these hosts with a variety of neutral, cationic and anionic guests, several techniques, for example, NMR,potentiometric tirations and monocrystal X-ray diffraction have been employed. Among them NMR is a powerful technique for unraveling the structure of polynitrogen receptors as long as they are in solution where the rapid tumbling of molecules averages out the anisotropies such as chemical shift and dipole-dipole interactions. General 1H NMR approach has been widely used for the study of host-guest interaction, but it is difficult for the accurate measurement in complexes structures, particularly metal complexes structures in which how the polynitrogen receptors bind metal, and which nitrogen binds metal and so on.     

3D α-Fe_2O_3/掺氮石墨烯/碳纳米管复合材料及其储锂性能

针对α-Fe2O3负极在充放电过程中存在的体积膨胀及首次库伦效率低等主要问题,本文采用简单的水热法制备出具有三维多孔结构的α-Fe2O3/掺氮石墨烯(N-GNS)/碳纳米管(CNTs)复合材料。XRD,SEM,TEM及XPS等测试结果表明碳纳米管成功插入到掺氮石墨烯片层间,暴露N-GNS表面的晶格缺陷,为α-Fe2O3晶体生长提供了大量成核位点。粒径大小为30~70 nm的α-Fe2O3颗粒均匀锚定于N-GNS/CNTs三维复合碳载体内进行高效储锂反应。电化学测试结果显示,这种三维复合结构有效改善了α-Fe2O3/GNS负极的电化学性能。     

Synthesis, Crystal Structure, Fluorescent and Thermal Properties of Sodium Tridecafluorodizirconate Na5Zr2F13 Compound

1 INTRODUCTION Considerable research effort on the heavy metal fluoride glasses like barium, zirconium fluoride and a series of rare-earth fluorozirconate compounds du- ring the last two decades was initiated by the broad optical transmission window of these glasses and thereby the potential for ultralow-loss optical fi- bers[1~10]. The fluorozirconate of alkali metals was first reported in 1938[11], and most of the sodium and potassium fluorozirconates were reported amongthe 1940s and 19…     

(R)-α-烷基糠胺的立体控制合成

本文以2-羟基蒎烷-3-酮(1)为手性助剂, 经手性酮亚胺(3)的不对称烷基化反应, 立体控制合成了(R)-α-烷基糠胺(5)。反应的对映体过量值经手性毛细管柱色谱测定为91.4→98%。     

N-烷基化手性氨基醇配体的合成

本实验制备了不同构型的两种N-单烷基和N-双烷基的新的手性氨醇配体。     

热处理对二氧化锰电化学行为的影响

以高锰酸钾和醋酸锰为前驱体, 通过液相沉淀法合成得到二氧化锰. 在不同温度热处理条件下研究二氧化锰的结构转变及其作为超级电容器电极材料的电化学行为. 采用X射线衍射(XRD), 扫描电镜(SEM), 氮气物理吸附和热重(TG)等手段表征产物的结构特点; 采用循环伏安和恒流充放电等方法表征其电化学行为. 结果表明: 合成的二氧化锰是具有中孔特征的α-MnO₂, 比表面积为253 m²·g^-1, 颗粒尺寸在50-100 nm之间. 350 °C以下的低温热处理使氧化锰仍能保持α-MnO₂的晶体结构, 比表面积为170 m²·g^-1左右, 单电极比电容值由原来未热解时的267 F·g^-1增加到250 °C热处理后的286 F·g^-1. 高温热处理(>450 °C)导致氧化锰逐渐过渡为α-Mn₂O₃, 且表面积下降约为30 m²·g^-1, 比电容急剧下降. 低温热处理后氧化锰的电化学稳定性明显提高, 在50 mV·s^-1的快速扫描速率下, 电极具有良好的倍率特性.