Purification of cellulosic pulp by hot water extraction

Hot water extraction (HWE) of pulp in a flow-through reactor was evaluated as a method to purify paper-grade pulps. About 50–80 % of the xylan and up to 50 % of the lignin in unbleached birch Kraft pulp was extracted by the HWE without losses in cellulose yield. The residual xylan content in the extracted pulps was predominantly too high for dissolving-grade applications, but some of the pulps with a xylan content of 5–7 % might still be suitable as rayon-grade pulps. Increasing extraction temperature lowered the xylan content at which cellulose yield started to decrease. Furthermore, at any given xylan content, increasing extraction temperature resulted in cellulosic pulp with higher degree of polymerization. The extracted xylan was recovered almost quantitatively as xylo-oligosaccharides. The results suggest that HWEs at elevated temperatures may be applied to purify cellulosic pulps, preferably containing a low xylan content, and to recover the extracted sugars.     

Learning Robot Force/Position Control for Repetitive High Speed Applications with Unknown Non–Linear Contact Stiffness

This paper proposes a learning robot force/position control for high speed force trajectory following. Following high speed force trajectories in different repetitve robotic applications is a challenging field in robot force control. If the end–effector should provide a contact force while following a position trajectory in the non–force controlled direction a parallel force / position control is suitable. However, when it comes to high speed tasks this force control method reaches its limit. The problem can be solved by using an iterative learning control method in combination with the parallel force/position control. In this paper the learning force control method is introduced and experimental results are presented. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Homo- and heteronuclear 2D NMR approaches to analyse a mixture of deuterated unlike/like stereoisomers using weakly ordering chiral liquid crystals

We describe several homo- and heteronuclear 2D NMR strategies dedicated to the analysis of anisotropic (2)H spectra of a mixture of dideuterated unlike/like stereoisomers with two remote stereogenic centers, using weakly orienting chiral liquid crystals. To this end, we propose various 2D correlation experiments, denoted "D(H)(n)D" or "D(H)(n)C" (with n=1, 2), that involve two heteronuclear polarization transfers of INEPT-type with one or two proton relays. The analytical expressions of correlation signals for four pulse sequences reported here were calculated using the product-operators formalism for spin I=1 and S=1/2. The features and advantages of each scheme are presented and discussed. The efficiency of these 2D sequences is illustrated using various deuterated model molecules, dissolved in organic solutions of polypeptides made of poly-gamma-benzyl-L-glutamate (PBLG) or poly-epsilon-carbobenzyloxy-L-lysine (PCBLL) and NMR numerical simulations.     

Molecular Cage Assembly by Sn−O−Sn Bridging of Di-, Tri- and Tetranuclear Organotin Tectons: Extending the Spacing in Double Ladder Structures

Hydrolysis reactions of di- and trinuclear organotin halides yielded large novel cage compounds containing Sn−O−Sn bridges. The molecular structures of two octanuclear tetraorganodistannoxanes showing double-ladder motifs, viz., [{Me₃SiCH₂(Cl)SnCH₂YCH₂Sn(OH)CH₂SiMe₃}₂(μ-O)₂]₂ [ 1 , Y=p-(Me)₂SiC₆H₄-C₆H₄Si(Me)₂] and [{Me₃SiCH₂(I)SnCH₂YCH₂Sn(OH)CH₂SiMe₃}₂(μ-O)₂]₂ ⋅ 0.48 I₂ [ 2⋅ 0.48 I₂, Y=p-(Me)₂SiC₆H₄-C₆H₄Si(Me)₂], and the hexanuclear cage-compound 1,3,6-C₆H₃(p-C₆H₄Si(Me)₂CH₂Sn(R)₂OSn(R)₂CH₂Si(Me)₂C₆H₄-p)₃C₆H₃-1,3,6 ( 3 , R=CH₂SiMe₃) are reported. Of these, the co-crystal 2⋅ 0.48 I₂ exhibits the largest spacing of 16.7 Å reported to date for distannoxane-based double ladders. DFT calculations for the hexanuclear cage and a related octanuclear congener accompany the experimental work.     

An Enantioselective Inverse‐Electron‐Demand Imino Diels–Alder Reaction

The imino Diels–Alder reaction is an efficient method for the synthesis of aza‐heterocycles. While different stereo‐ and enantioselective inverse‐electron‐demand imino Diels–Alder (IEDIDA) reactions have been reported before, IEDIDA reactions including electron‐deficient dienes are unprecedented. The first enantioselective IEDIDA reaction between electron‐poor chromone dienes and cyclic imines, catalyzed by zinc/binol complexes is described. The novel reaction provides a facile entry to a natural product inspired collection of ring‐fused quinolizines including a potent modulator of mitosis.     

Electrophilic Alkylations of Vinylsilanes: A Comparison of α‐ and β‐Silyl Effects

Kinetics of the reactions of benzhydrylium ions (Aryl₂CH⁺) with the vinylsilanes H₂C?C(CH₃)(SiR₃), H₂C?C(Ph)(SiR₃), and (E)‐PhCH?CHSiMe₃ have been measured photometrically in dichloromethane solution at 20 °C. All reactions follow second‐order kinetics, and the second‐order rate constants correlate linearly with the electrophilicity parameters E of the benzhydrylium ions, thus allowing us to include vinylsilanes in the benzhydrylium‐based nucleophilicity scale. The vinylsilane H₂C?C(CH₃)(SiMe₃), which is attacked by electrophiles at the CH₂ group, reacts one order of magnitude faster than propene, indicating that α‐silyl‐stabilization of the intermediate carbenium ion is significantly weaker than α‐methyl stabilization because H₂C?C(CH₃)₂ is 10³ times more reactive than propene. trans‐β‐(Trimethylsilyl)styrene, which is attacked by electrophiles at the silylated position, is even somewhat less reactive than styrene, showing that the hyperconjugative stabilization of the developing carbocation by the β‐silyl effect is not yet effective in the transition state. As a result, replacement of vinylic hydrogen atoms by SiMe₃ groups affect the nucleophilic reactivities of the corresponding C?C bonds only slightly, and vinylsilanes are significantly less nucleophilic than structurally related allylsilanes.     

SO2–ethanol–water (SEW) fractionation process: production of dissolving pulp from spruce

SO₂–ethanol–water (SEW) fractionation process is a highly attractive platform for future lignocellulosic Biorefineries. Its governing advantages include high flexibility in the selection of the raw material, simple and efficient recovery of fractionation chemicals, absence of carbohydrate degradation (both cellulose and hemicelluloses), and high reaction rates. The process is suitable for production of various carbohydrate- and lignin-based products including papermaking pulp, glucose, bioalcohols and lignosulfonates. The present paper addresses the possibility of producing dissolving pulp from spruce using SEW fractionation followed by ECF bleaching with and without hot caustic extraction. Comprehensive characterisation of chemical and macromolecular properties of the SEW dissolving pulps was complemented by determining the quality of viscose. The comparison with conventional viscose-grade acid sulfite pulps revealed close proximity in all properties. Therefore, considering the advantages of SEW process, it is suggested as a possible replacement for acid sulfite process in dissolving pulp manufacturing.     

Resistivity and Thermal Expansion (4.2–820 K) of Skutterudites after Severe Plastic Deformation via HPT

Thermoelectric materials with a high figure of merit, ZT, are the essential basis to build thermoelectric generators, which can directly convert heat into electricity. Severe plastic deformation (SPD) via high-pressure torsion (HPT) was successfully applied to enhance ZT of ball-milled and hot-pressed skutterudites as well as to produce bulk nanostructured skutterudites directly from powders. SPD introduces many defects into the sample and in parallel the crystallite size is significantly reduced. During measurement-induced heating these defects anneal partially out, and the grains grow. In this work for the first time systematically the changes of the temperature-dependent electrical resistivity and of thermal expansion were compared. It could be shown that for p- and n-type skutterudites, being hot-pressed and HPT-processed as well as directly HPT-processed from compacted powder, these changes occur more or less simultaneously within the same temperature ranges. This evaluation gives a much deeper insight into the thermoelectric behavior of HPT samples under the influence of changing temperature.