激光陀螺磁灵敏度特性研究

分析、计算了激光陀螺的磁灵敏度特性,并进行了磁灵敏度试验.试验结果及分析表明：在腔体加工准确度不变的情况下,采用合理的设计可以大大降低激光陀螺在某些方向上的磁灵敏度,同时磁试验结果对于设计激光陀螺的磁屏蔽结构具有一定的实用价值.     

激光陀螺锁区特性的研究

从理论和试验两个方面,研究了四边形腔环行激光陀螺的锁区特性.利用环行腔中背向散射光束具有相干性,导出了环行谐振腔综合背向散射与反射镜、反射镜之间的相对位置的关系.在有两个位移反射镜的四边形谐振腔中,理论上得到了综合背向散射系数与谐振腔腔长具有双波长周期.利用综合背向光强实验及锁区与陀螺工作模数实验分别验证了理论的正确性.试验证实散射光的强度与谐振腔的工作模数存在双模周期性,综合背向散射系数大,陀螺锁区大,反之亦然.     

全息模拟再现像的三维重构

提出一种全息模拟再现像的三维重构方法,可以模拟再现得到三维再现像.计算机模拟再现许多幅在不同深度位置的二维光强分布;利用灰度级变化的聚焦度评价方法,通过寻找最大聚焦度值,确定再现三维像各像点的深度信息.实验证明,该方法能实现模拟再现像的三维重构,使数字全息术有希望成为一种全新的三维面形检测技术.再现像三维重构的实现可以更客观地对全息图进行像质评价,并验证计算机制全息术算法的正确性.     

Stereocontrolled enantioselective addition of diethylzinc to aldehydes using new chiral aminoalcohols

The new chiral β-aminoalcohols of indolinylmethanols ( 1 ) and their reduced derivatives ( 2 ) were synthesized from (S)-indoline-2-carboxylic acid. Both (R) and (S) enantiomers of the optically active secondary alcohols have been successfully obtained in high enantiomeric excess from the stereoselective addition of diethylzinc to the aldehydes catalyzed by the chiral aminoalcohols ( 1 and 2 ). The sense of the asymmetric induction and the degrees of enantioselectivities turned out to be highly dependent on the structure of the catalysts: The presence of the catalyst 1 afforded the (S)-configuration of the corresponding alcohols; on the other hand, the presence of 2 afforded the (R)-configuration of the alcohols in high enantiomeric selectivity.     

新型微乳化柴油抛撒和云雾爆炸实验及其抑爆性能评估

为掌握新型微乳化柴油的抑爆性能和机理,开展了-10#柴油、普通微乳化柴油和新型微乳化柴油抛撒和云雾爆炸实验。采用灰色关联分析法,对柴油样品云雾爆炸火球的表面最高温度时的平均温度、高温(高于1 273.15 K)持续时间、火球最大截面积、火球辐射度等特征参数进行定量计算并评估其爆炸威力,又运用液体燃料抛撒和成像系统,研究柴油样品在激波及其高速气流作用下的抛撒雾化现象及其抑爆机理。结果表明:新型微乳化柴油的抛撒云雾径向扩展半径和云雾爆炸火球特征参数均明显小于-10#柴油、普通微乳化柴油,如在含水质量分数为5%的乳化柴油中分别添加质量分数为0.2%和0.4%的高分子聚合物防雾剂,形成的新型微乳化柴油的火球表面最高平均温度比-10#柴油分别低296.90和336.90 K,高温持续时间比-10#柴油分别少94和234 ms;火球最大截面积也分别只有-10#柴油的60.10%、53.53%;新型微乳化柴油的爆炸威力最小,抑爆性能最好,其次是普通微乳化柴油和-10#柴油;微乳化柴油的水分质量分数在15%以下时,多增加10%的水与添加0.2%防雾剂的抑爆效果相当;新型微乳化柴油抑爆性能较好的主要原因是柴油中添加防雾剂使其液滴黏弹性增大,在高速气流剪切作用不易破碎、雾化,液滴分散效果差。     

基于改进MP-WVD算法的核电厂建设爆破振动信号处理方法

针对爆破施工产生的振动问题,结合现有信号分析方法优缺点,引入MP-WVD组合算法解决信号分析过程中交叉项干扰问题,可提高时频分辨率,满足精确提取核电爆破振动响应信号时频分布特征的需求;将HHT算法引入MP算法数据的预处理,成功降低了MP算法运算复杂度,可为大数据量分析奠定基础。运用该算法对漳州核电一期工程场地平整土石方爆破工程振动监测信号进行分析,精确提取了爆破振动信号的时频特征。     

有机杂化锡硫化合物[Ni(tepa)]2 (μ2 -Sn2 S6 )的溶剂热合成及晶体结构

利用溶剂热法合成了有机杂化锡硫化合物[Ni(tepa)]2(μ2-Sn2S6)(1,tepa=四乙烯五胺),其结构和光吸收特性经IR,元素分析和UV表征,晶体结构由X-射线单晶衍射仪测定。1属于四方晶系,空间群为I41/a,晶胞参数:a=0.909 0(17)nm,b=1.305 1(2)nm,c=1.299 2(2)nm,β=92.918(4)°,V=1.539 3(5)nm3,Z=4,Mr=462.89 g.mol-1,Dc=1.997 g.cm-3,μ=3.243 mm-1,F(000)=928,R1=0.070 2,wR2=0.151 2[I>2σ(I)],S=1.075。1中Ni2 离子与tepa配体的5个N原子和[Sn2S6]4-阴离子的一个端基S原子配位,形成了畸变八面体几何构型。[Sn2S6]4-阴离子作为桥连配体,通过端基S原子与[Ni(tepa)]2 配阳离子连接形成了中性的中心对称化合物[Ni(tepa)]2(μ2-Sn2S6)。     

One‐Pot Synthesis of 2,5‐Furandicarboxylic Acid from 2‐Furoic Acid by a Pd‐catalyzed Bromination–Hydroxycarbonylation Tandem Reaction in Acetate Buffer

The one‐pot synthesis of 2,5‐furandicarboxylic acid from 2‐furoic acid with a yield of 57 % was achieved for the first time using a Pd‐catalyzed bromination‐hydroxycarbonylation tandem reaction in HOAc‐NaOAc buffer. This synthetic protocol shows major improvements compared to previously reported methods, such as using biomass‐based 2‐furoic acid as low‐cost raw material, one‐pot synthesis without isolation of intermediate products, and no need for an acidification procedure. Experiments indicate that the involved Xantphos‐modified Pd‐catalyst and the buffer solution play significant promoting roles for each individual reaction whereas Br₂ (as the brominating reagent) had a negative effect on the second hydroxycarbonylation step, while CO was deleterious for the first bromination step. Hence, in this practical one‐pot synthesis, Br₂ should be consumed in the first bromination step as fully as possible, and CO is introduced after the first bromination step has been completed.