硫脲掺杂金刚石的高温高压合成及FT-IR光谱研究

利用温度梯度法,在6.5 GPa、1 300～1 350℃的高温高压极端物理条件下,通过在FeNiCo-C合成体系中添加硫脲(CH4N2S)成功合成了金刚石,所合成的晶体呈现出黄色且具有六-八面体形貌.利用扫描电镜(SEM)对所合成金刚石的表面形貌进行了表征,测试结果表明,随着合成体系中CH4N2S添加量的逐渐增加,所合成金刚石的表面变得逐渐粗糙.借助傅里叶红外(FT-IR)光谱对金刚石样品内部的氮、氢缺陷以及化学键结构进行了测试分析,结果表明,金刚石中的氢元素以-CH3,-CH2-,C-H形式存在,而其内部的氮杂质以C心、A心形式存在.此外,在3 300～3 600 cm-1观察到NH的吸收带.     

酰胺功能化修饰琼脂糖/硅胶复合材料的制备及吸附性能研究

采用溶胶-凝胶法,以氧化琼脂糖和四甲氧基硅烷为前驱体,通过水解、缩聚反应制得琼脂糖/硅胶复合材料,进一步利用开环、"巯-烯"点击和酰胺化反应对复合材料实现酰胺基团功能化修饰.借助红外光谱(FT-IR)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)对所制备复合材料进行结构、组成和微观形貌表征.以制备的酰胺功能化修饰琼脂糖/硅胶复合材料为吸附剂,探讨其对莱克多巴胺的吸附过程,实验考察了溶剂、吸附时间、莱克多巴胺的初始浓度等对吸附的影响.结果表明:经过修饰反应酰胺基团成功接枝到琼脂糖/硅胶复合材料,该材料颗粒呈球形,粒径在2～3μm之间;复合材料对莱克多巴胺表现出良好的吸附性能,吸附过程50 min达到平衡,适合准二级动力学特征,属化学吸附,吸附等温线符合Freundlich模型;复合材料经过6次吸附解析,再生后对莱克多巴胺的吸附率仅有小幅下降,表明具有较好的循环再生吸附能力.     

非齐次动力学方程的一种精细积分单步方法

针对非齐次动力学方程■,结合精细积分法和微分求积法,利用同阶的显式龙格-库塔法对计算过程中待求的v_(k+i/s)(i=1,2,…,s)进行预估,提出了一种避免状态矩阵求逆的高效精细积分单步方法。该方法采用精细积分法计算e~(Ht),而Duhamel积分项采用s级s阶的时域微分求积法,计算格式统一且易于编程,可灵活实现变阶变步长。仿真结果表明,与其他单步法及预估校正-辛时间子域法进行数值比较,该方法具有高精度、高效率及良好的稳定性,在求解大规模动力系统时间响应问题中具有较大的优势。     

Giant Asymmetric Transmission and Circular Dichroism with Angular Tunability in Chiral Terahertz Metamaterials

Inspired by the chiral structure from mode interaction, a chiral terahertz metamaterial and its complementary structure with the coexistence of asymmetric transmission and circular dichroism response are designed. The asymmetric transmission happens in the presence of electric and magnetic modes perpendicular to each other, resulting from intrinsic chirality under normal incidence. Circular dichroism exists in the presence of electric and magnetic modes parallel to each other under oblique incidence because of extrinsic chirality. Both asymmetric transmission and circular dichroism are enhanced by complementary structures, benefitting from the coupling between adjacent units. The maximum of chiral parameter κ can achieve 450, which is one hundred times higher than previously reported. The chiral response can be tuned by the incident angle and is sensitive to the environmental refractive index. The results highlight the potential applications of these metamaterials in chiral sensing and polarization transformation devices.     

正电子冲击下氦电离三重微分截面的理论计算

我们发展了一种正电子碰撞原子电离的畸变波Born近似方法, 在这个方法中,正负电子偶素通道通过一个ab initio的光学势附加到入射粒子和靶的相互作用势上,且通道对电离作用被第一次被考虑在正电子碰撞原子电离的过程中. 应用这个方法计算了在50 eV入射能量范围氦的电离的三重微分截面,计算结果和实验数据很好的符合.     

基于粒子滤波的运动目标光电定位仿真研究

运动目标的光电定位不能像静止目标那样简单做均值滤波,鉴于此,引入粒子滤波算法,它不仅可以应用于线性系统,而且还适用于非线性系统。结合光电定位需求,详细推导了计算公式及初值和参数选取公式,对只含测量噪声以及含有测量和运动噪声等的海面运动目标光电无源定位算法进行了仿真计算,验证了算法的有效性,讨论了噪声强度对滤波效果的影响,滤波参数选择对滤波效果的影响,目标运动方式对滤波跟随性的影响,重采样算法对滤波效果的影响等。所得结论为:粒子滤波可用于运动目标光电定位过程,可有效降低定位误差;粒子滤波算法具有较强鲁棒性,适用于噪声较大、目标运动形态变化大等情况。     

分光技术在自由电子激光结合里德堡态氢原子飞行时间谱装置中的应用

本文描述了一种应用于自由电子激光结合高里德堡态氢原子飞行时间谱装置中的分光方法,以及该方法应用于小分子(如₂S)光解动力学研究中的必要性. 拉曼-α辐射(121.6 nm),用作H原子产物探测的激光,是在Kr/Ar气介质中利用四波混频产生的. 利用透镜对不同波长的光有不同的折射率,四波混频后的混合光在经过一片离轴的氟化锂透镜后,121.6 nm的激光将会与212.6和845 nm在空间上分开. 在激光到达反应中心前利用挡板挡住212.6和845 nm的激光,只让121.6 nm的光经过反应中心,从而消除212.6 nm激光产生的背景信号对实验的干扰. 结合自由电子激光,成功地研究了H₂S在122.95 nm波长下的光解动力学,采集到了产物时间飞行谱. 本文展示了转换得到的产物总平动能谱,解离机理与121.6 nm波长下的结果相似. 实验结果显示,该方法成功地解决了分子在VUV波段进行光解动力学研究的难题,消除了这些分子在紫外光波段因为强烈吸收而产生的背景信号.     

超导离子源铌三锡六极线圈镜像磁场约束结构的优化设计

中国科学院近代物理研究所正在进行国际首台45 GHz全铌三锡超导离子源FECR(Fourth Electron Cyclotron Resonance)磁体的研制,该离子源磁体线圈由六个铌三锡超导六极线圈和四个铌三锡超导螺线管线圈组成。由于单根超导线绕制异形六极线圈(非标准鞍型)技术难度大,且铌三锡超导性能对应力敏感,为了测试单个铌三锡六极线圈性能能否达到设计指标,基于铝合金壳层结构和Bladder-Key精确预紧技术,设计了镜像磁场约束结构。本工作主要阐述了运用ANSYS参数化设计编程对镜像磁场结构进行优化设计的过程和优化后的镜像磁场结构,确定了室温预应力大小,并给出了线圈经过室温预紧、冷却降温和加电励磁后的最大等效应力。进一步结合实际六极线圈制作公差(±0.1 mm),分析和评估了公差对镜像磁场结构中六极线圈预应力施加的影响。     

Terahertz wave emission from water lines

To make further understanding of terahertz(THz)wave generation from liquid water,we study THz wave emission from water lines of different diameters.The water line with a smaller diameter generates a stronger THz electric field for the diameters from 0.2 mm to 0.5 mm.The THz electric field strength and polarity change with the relative position between the incident laser and water line.Moreover,the THz energy has an optimal radiation angle of about 60°.A two-dimensional dipole array model is introduced to illustrate the phenomenon.Our observations contribute to optimizing the scheme of the liquid THz source.     

Overview of finite elements simulation of temperature profile to estimate properties of materials 3D-printed by laser powder-bed fusion

Laser powder bed fusion(LPBF),like many other additive manufacturing techniques,offers flexibility in design expected to become a disruption to the manufacturing industry.The current cost of LPBF process does not favor a try-anderror way of research,which makes modelling and simulation a field of superior importance in that area of engineering.In this work,various methods used to overcome challenges in modeling at different levels of approximation of LPBF process are reviewed.Recent efforts made towards a reliable and computationally effective model to simulate LPBF process using finite element(FE)codes are presented.A combination of ray-tracing technique,the solution of the radiation transfer equation and absorption measurements has been used to establish an analytical equation,which gives a more accurate approximation of laser energy deposition in powder-substrate configuration.When this new analytical energy deposition model is used in in FE simulation,with other physics carefully set,it enables us to get reliable cooling curves and melt track morphology that agree well with experimental observations.The use of more computationally effective approximation,without explicit topological changes,allows to simulate wider geometries and longer scanning time leading to many applications in real engineering world.Different applications are herein presented including:prediction of printing quality through the simulated overlapping of consecutive melt tracks,simulation of LPBF of a mixture of materials and estimation of martensite inclusion in printed steel.