飞秒激光加工蓝宝石超衍射纳米结构

蓝宝石具有超强硬度及耐腐蚀、耐高温、在紫外-红外波段具有良好的透光性等优点,在军工业以及医疗器械方面具有广泛的应用前景.然而这些优点又对蓝宝石的机械加工或化学腐蚀加工带来困难.飞秒激光脉冲具有热损伤小、加工分辨率高、材料选择广等特点,被广泛应用于固体材料改性和高精度三维微纳器件加工.本文提出了利用飞秒激光多光子吸收特性在蓝宝石表面实现超越光学衍射极限的精细加工.利用聚焦后的波长为343 nm的飞秒激光,配合高精密三维压电位移台,实现激光焦点和蓝宝石晶体的相对三维移动,在蓝宝石晶体衬底上进行精确扫描,得到了线宽约61 nm的纳米线,纳米线间的最小间距达到142 nm左右.利用等离子体模型解释了加工得到的纳米条纹的产生原因,研究了激光功率、扫描速度对加工分辨率的影响.最终本工作实现了超越光学衍射极限的加工精度,为实现利用飞秒激光对高硬度材料的微纳结构制备提供了参考.     

同轴强流双环形阴极的发射特性分析

提出了一种同轴双环形阴极结构二极管,并进行理论求解和仿真研究,得到了双环形阴极二极管中,内外环上场强一致时二极管内尺寸分布关系。并采用粒子仿真软件进行了双环形阴极爆炸发射模拟研究,研究结果表明,双环形阴极发射束流由高压加载后初始时刻二极管内电场分布和内外环形阴极相互之间屏蔽作用的竞争结果决定。提出了两阴极相互之间屏蔽作用的经验公式,指出该相互屏蔽作用程度随发射总束流呈线性关系,随两阴极距离呈指数关系,最终采用粒子仿真软件进行了验证。     

Crystallization process of Bi(Pb)-Sr-Ca-Cu-O glass

A crystallization study has been carried out for rapidly solidified Bi₂Pb_0.5Sr₂Ca₄Cu₅O_x glass. Glass transition temperature T _g, crystallized superconducting phases and microstructural changes were measured and analysed by differential thermal analysis (DTA), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The crystallization mechanism of the three superconducting phases — (2201) 20 K phase, (2212) 80 K phase, and (2223) 110 K phase — has been discussed, and a time-temperature-transformation diagram for the glass has been constructed.     

不同结构毛细管网辐射板供冷性能实验研究

对两种不同结构毛细管网辐射板的性能进行了实验研究,分析了在不同供水温度下,该两种辐射板在表面温度分布、供冷能力、安装辐射板房间温度变化情况之间的差异,为今后毛细管网辐射供冷空调系统辐射末端的设计应用及运行控制提供依据。     

Quantitative evaluation of equatorial small-angle X-ray scattering for cylindrical fibers

Elongated microvoids, internal fibrillar structure, and edge scattering from both surface refraction cause an equatorial streak in small angle X-ray scattering. A model for analyzing the edge scattering of fibers is proposed. Simulation results indicate that the intensity of edge scattering from surface refraction of a cylindrical fiber is strong and makes an important contribution to the equatorial streak. Two factors influence edge scattering intensity. One is the sample-to-detector distance (D); edge scattering intensity increases with increasing D. The equatorial streak becomes weak when D is shortened. The other factor is the refraction index. Edge scattering intensity increases as the real component of the refraction index decreases. In experiment, weak or even no equatorial streaks were found for samples measured in a roughly index-matching fluid. Edge scattering can be eliminated or weakened, and it can be calculated by comparing the intensities of a cylindrical fiber when it is measured in air and in index-matching fluid. The simulation data are basically in agreement with the experimental data.     

RP-HPLC法测定西洛多辛固体分散体中的西洛多辛

建立RP-HPLC法测定西洛多辛固体分散体含量。采用Inertsil ODS-3 C18(4.6mm×250mm,5μm)色谱柱,流动相为乙腈:磷酸盐缓冲液(调pH值为7.0)=50∶50(V/V),检测波长220nm,流速1.0mL/min,柱温30℃。结果表明在25—250μg/mL范围内,西洛多辛线性良好(n=6,r=0.9997),平均回收率104.46%,RSD为2.97%。本方法灵敏,快捷,结果准确,可用于西洛多辛固体分散体的含量测定。     

Laser Fabrication of Nanostructures on a Pure Aluminum Surface in Air

We report on the fabrication of surface nanoparticles and micro/nanograting structures on bulk pure aluminum in air using a 150 fs, 775 nm femtosecond laser. We investigate the size of the generated surface nanoparticles under irradiation with different femtosecond laser pulses. Smaller nanoparticles can be induced by a larger number of laser pulses and a lower laser fluence. In addition, we observe the formation of micro/nanogratings when the laser focus is scanned across a pure aluminum surface in air. We obtain micro- and nano-grating composite structures on a pure aluminum surface by adjusting the laser fluence and scan velocity. Femtosecond laser surface ablation of bulk pure aluminum in air is potentially a promising technique for efficient fabrication of surface nanostructures.     

分数维方法研究GaAs薄膜中的极化子

本文采用分数维方法, 在讨论Al_0.3Ga_0.7As衬底上GaAs薄膜的分数维基础上, 计算了GaAs薄膜中的极化子结合能和有效质量. 随着薄膜厚度的增加, 极化子结合能和质量变化单调地减小. 当薄膜厚度L_w<70 Å并且衬底厚度L_b<200 Å时, 衬底厚度的变化对薄膜中极化子的结合能和质量变化的影响比较显著, 随着衬底厚度的增加, 薄膜中极化子的结合能和质量变化逐渐变大; 当薄膜厚度L_w>70 Å或者衬底厚度L_b>200 Å时, 衬底厚度的变化对薄膜中极化子的结合能和质量变化的影响不显著. 研究结果为GaAs薄膜电子和光电子器件的研究和应用提供参考. 关键词： 分数维方法 GaAs薄膜 极化子 低维异质结构     

高次柱面反射型太阳能聚光镜的光学设计

提出了一种新型高效太阳能聚光镜, 这种聚光镜用一组特定系数, a₂, a₄, a₆, a₈, a₁₀, a₁₂, a₁₄, a₁₆ 与 C的高次柱面内壁的一部分作为反射镜. 利用高次柱面方程和光反射定律, 推导出了在高次柱面内壁上太阳反射光束的方向矢量与高次柱面系数C, a₂,a₄, a₆, a₈, a₁₀, a₁₂, a₁₄, a₁₆的关系, 通过优化设计这些系数, 可以使入射到高次柱面内壁上的太阳光束反射后全部聚焦在一条与柱面母线平行的宽度很窄的线段上, 形成线聚光. 这组特定系数用粒子群优化算法求得, 并经计算机模拟证明其聚焦效果. 用这组特定系数的高次柱面作为聚光镜, 其对光的压缩比可达148倍, 其线性光斑可作为一种强光源或高温光源. 高次柱面反射镜可由金属或玻璃直接磨制而成, 也可由高次柱面骨架和铺设在骨架上的镀铝聚酯薄膜构成. 关键词： 太阳能聚光镜 高次柱面 多项式系数优化 线性聚焦