Third-order nonlinear optical studies of newly synthesized polyoxadiazoles containing 3,4-dialkoxythiophenes

The third-order nonlinear optical properties of newly synthesized soluble polyoxadiazoles containing 3,4-dialkoxythiophenes were investigated by using Z-scan and degenerate four-wave mixing (DFWM) techniques. The measurements were performed at 532 nm with 7 ns pulses from a Nd:YAG laser. We found a good agreement between the values of χ⁽³⁾ determined from both the experiments. Z-scan results indicate a negative nonlinear refractive index, n₂, whose magnitude is of the order of 10⁻¹⁰ esu for all the copolymers. The variation of nonlinear response among the copolymers clearly indicates the dependence of χ⁽³⁾ on donor and acceptor type of units present in these copolymers. The copolymers exhibit strong reverse saturable absorption and good optical limiting properties at 532 nm.     

Ultrafast fluorescence resonance energy transfer in a bile salt aggregate: Excitation wavelength dependence

Fluorescence resonance energy transfer (FRET) from Coumarin 153 (C153) to Rhodamine 6G (R6G) in a secondary aggregate of a bile salt (sodium deoxycholate, NaDC) is studied by femtosecond up-conversion. The emission spectrum of C153 in NaDC is analysed in terms of two spectra-one with emission maximum at 480 nm which corresponds to a non-polar and hydrophobic site and another with maximum at ∼530 nm which arises from a polar hydrophilic site. The time constants of FRET were obtained from the rise time of the emission of the acceptor (R6G). In the NaDC aggregate, FRET occurs in multiple time scales — 4 ps and 3700 ps. The 4 ps component is assigned to FRET from a donor (D) to an acceptor (A) held at a close distance (R _DA ∼ 17 ?) inside the bile salt aggregate. The 3700 ps component corresponds to a donor-acceptor distance ∼48 ?. The long (3700 ps) component may involve diffusion of the donor. With increase in the excitation wavelength (λ _ex) from 375 to 435 nm, the relative contribution of the ultrafast component of FRET (∼4 ps) increases from 3 to 40% with a concomitant decrease in the contribution of the ultraslow component (∼3700 ps) from 97 to 60%. The λ _ex dependence is attributed to the presence of donors at different locations. At a long λ _ex (435 nm) donors in the highly polar peripheral region are excited. A short λ _ex (375 nm) ‘selects’ donor at a hydrophobic location.     

Pyrene-containing peptide-based fluorescent organogels: inclusion of graphene into the organogel

The N-terminally pyrene-conjugated oligopeptide, Py-Phe-Phe-Ala-OMe, (Py=pyrene 1-butyryl acyl) forms transparent, stable, supramolecular fluorescent organogels in various organic solvents. One of these organogels was thoroughly studied using various techniques including transmission electron microscopy (TEM), field-emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), Fourier-transform infrared (FTIR) spectroscopy, photoluminescence (PL) spectroscopy, and rheology. Unfunctionalized and non-oxidized graphene was successfully incorporated into this fluorescent organogel in o-dichlorobenzene (ODCB) to form a stable hybrid organogel. Graphene is well dispersed into the gel medium by using non-covalent π-π stacking interactions with the pyrene-conjugated gelator peptide. In the presence of graphene, the minimum gelation concentration (mgc) of the hybrid organogel was lowered significantly. This suggests that there is a favorable interaction between the graphene and the gelator peptide within the hybrid organogel system. This hybrid organogel was characterized using TEM, AFM, FTIR, PL, and rheological studies. The TEM study of graphene-containing hybrid organogel revealed the presence of both graphene sheets and entangled gel nanofibers. The AFM study indicated the presence of 3 to 4 layers in exfoliated graphene in ODCB and the presence of both graphene nanosheets and the network of gel nanofibers in the hybrid gel system. The rheological investigation suggested that the flow of the hybrid organogel had become more resistant towards the applied angular frequency upon the incorporation of graphene into the organogel. The hybrid gel is about seven times more rigid than that of the native gel.     

Multiple proton ionizable calixarene derivatives with different ring sizes and complexation ability as efficient ionophores for complexation and solvent extraction of trivalent indium

The solvent extraction behavior of multiple proton ionizable p-tert-butylcalix[4]arene and [6]arene carboxylic acid derivatives towards indium has been investigated along with an acyclic monomeric analogue from weakly acidic media into chloroform. The extraction mechanism is ion exchange and carboxylic acid groups are adequate ligating sites for extraction. The cyclic structure of calixarene ligands to accommodate the potential guest species and the cooperativity effect of multifunctional groups significantly affect the complexation behavior and calixarene derivatives are found to be excellent extractants over the monomeric analogue. The composition of the extracted complex depends on the solution pH and attempts to determine the composition of the extracted complex for the extraction of indium have been stymied by complications arising from the formation of polynuclear species of indium and bridged polymeric species of calixarene carboxylic acid derivatives. One mole of calix[4]arene derivative extracts 2.5 moles of indium whereas the calix[6]arene derivative tends to extract 4.0 moles of indium. The loaded indium is back extracted with 1 mol dm(-3) hydrochloric acid solution. Though quantitative back extraction of indium was achieved from the fully loaded calix[6]arene derivative, it was only achieved up to 85% in the case of the calix[4]arene derivative.     

Effect of surface modes on the six-dimensional molecule-surface scattering dynamics of H2-Cu(100) and D2-Cu(111) systems

We include the phonon modes originating from the three layers of Cu(100)/Cu(111) surface atoms on the dynamics of molecular [H(2)(v,j)/D(2)(v,j)] degrees of freedom (DOFs) through a mean field approach, where the surface temperature is incorporated into the effective Hamiltonian (potential) either by considering Boltzmann probability (BP) or by including the Bose-Einstein probability (BEP) factor for the initial state distribution of the surface modes. The formulation of effective potential has been carried out by invoking the expression of transition probabilities for phonon modes known from the "stochastic" treatment of linearly forced harmonic oscillator (LFHO). We perform four-dimensional (4D?2D) as well as six-dimensional (6D) quantum dynamics on a parametrically time and temperature-dependent effective Hamiltonian to calculate elastic/inelastic scattering cross-section of the scattered molecule for the H(2)(v,j)-Cu(100) system, and dissociative chemisorption-physisorption for both H(2)(v,j)-Cu(100) and D(2)(v,j)-Cu(111) systems. Calculated sticking probabilities by either 4D?2D or 6D quantum dynamics on an effective potential constructed by using BP factor for the initial state distribution of the phonon modes could not show any surface temperature dependence. In the BEP case, (a) both 4D?2D and 6D quantum dynamics demonstrate that the phonon modes of the Cu(100) surface affect the state-to-state transition probabilities of the scattered H(2) molecule substantially, and (b) the sticking probabilities due to the collision of H(2) on Cu(100) and D(2) on Cu(111) surfaces show noticeable and substantial change, respectively, as function of surface temperature only when the quantum dynamics of all six molecular DOFs are treated in a fully correlated manner (6D).     

Fluorination of polymers by sulfur hexafluoride gas under electric discharge

Fluorination of low-density polyethylene, polyacetylene, and poly(vinyl alcohol) was carried out using SF₆ gas under electric discharge. The polymers were partially fluorinated and the extent of fluorination was more in the case of poly (vinyl alcohol) than the other two polymers. The fluorinated polymers were characterized by elemental analysis (Fluorine), IR, and x-ray diffraction. Optical transparency of the films was also measured. The fluorinated polymers show better solvent resistance and decreased transparency than the virgin polymer. © 1994 John Wiley & Sons, Inc.     

Simple systematization of vibrational excitation cross-section calculations for resonant electron-molecule scattering in the boomerang and impulse models

Vibrational excitation (nu(f)<--nu(i)) cross-sections sigma(nu(f)<--nu(i) )(E) in resonant e-N(2) and e-H(2) scattering are calculated from transition matrix elements T(nu(f),nu(i) )(E) obtained using Fourier transform of the cross correlation function , where psi(nu(i))(R,t) approximately =e(-iH(A(2))-(R)t/h phi(nu(i))(R) with time evolution under the influence of the resonance anionic Hamiltonian H(A(2) (-))(A(2) (-)=N(2)(-)/H(2) (-)) implemented using Lanczos and fast Fourier transforms. The target (A(2)) vibrational eigenfunctions phi(nu(i))(R) and phi(nu(f))(R) are calculated using Fourier grid Hamiltonian method applied to potential energy (PE) curves of the neutral target. Application of this simple systematization to calculate vibrational structure in e-N(2) and e-H(2) scattering cross-sections provides mechanistic insights into features underlying presence/absence of structure in e-N(2) and e-H(2) scattering cross-sections. The results obtained with approximate PE curves are in reasonable agreement with experimental/calculated cross-section profiles, and cross correlation functions provide a simple demarcation between the boomerang and impulse models.     

纳米多孔二氧化钛电极辅助光电化学降解乙酰氨基酚及伐昔洛韦

作为一类具有较高生物活性的物质,药物及个人护理品对环境的污染引起人们越来越多的关注.对乙酰氨基酚和伐昔洛韦是两种使用广泛的药物,由于其潜在的对人类健康和生态安全的威胁而逐渐成为研究热点.而电化学辅助光氧化技术因其具备能够高效处理难降解化学品的优点而得到广泛使用.本文合成了纳米多孔二氧化钛电极,研究了电化学还原处理对纳米多孔二氧化钛电极辅助光电化学降解对乙酰氨基酚和伐昔洛韦的影响.使用扫描电镜和色散谱技术对合成的纳米多孔二氧化钛电极的形态和元素组成进行了表征.循环伏安法、莫特-肖特基曲线、紫外-可见分光光度计和总有机碳分析仪被用来研究对乙酰氨基酚和伐昔洛韦的光电化学降解过程.结果显示,对乙酰氨基酚和伐昔洛韦的光化学降解和电化学降解过程非常缓慢,在研究的时间范围内其浓度未见明显变化,因此可以忽略不计.但是对乙酰氨基酚和伐昔洛韦的光电化学降解速度比较快,与未经处理的纳米多孔二氧化钛电极相比,经过电化学还原处理的电极可以使对乙酰氨基酚和伐昔洛韦的光电化学降解分别提高86.96%和53.12%.这可能是由于在电化学还原处理过程中生成了Ti3+, Ti2+和氧空位以及导电性的提高.还研究了温度对对乙酰氨基酚和伐昔洛韦光电化学降解的影响,随着温度升高,对乙酰氨基酚和伐昔洛韦的光电化学降解速率增大.