基于可见光-近红外光谱的BIF磁性率确定方法研究

铁矿中磁性率是评价铁矿床工业价值和划分矿石工业类型的重要指标。传统的磁性率测定法存在工作量大、效率低、周期长的缺陷,成为经济、合理、高效开采铁矿资源的瓶颈问题。采用便携式地物光谱测试仪对辽宁省鞍钢集团鞍千矿业有限责任公司的BIF实验样品进行可见光-近红外光谱测试,分析了光谱特征,构建了比值指数(RI)、差值指数(DI)和归一化指数(NDI),并确定光谱指数与样品磁性率相关性最显著的敏感波段及对应的相关系数值;优选出与样品磁性率相关性最显著的比值指数(RI),构建实验样品磁性率的定量反演模型,并进行了验证。结果表明,三种光谱指数与样品磁性率敏感波段均位于935与1 050 nm,且该波段处的相关系数均达到0.9以上,其中比值指数与样品磁性率的相关性最高;基于比值指数构建的实验样品磁性率定量反演模型的预测误差为0.038,反演磁性率与实测磁性率的判定系数(R2)为0.964 5,预测结果比较理想。为确定BIF的磁性率提供了一种新方法,该方法具有工作强度小、经济、高效、便捷的优点,且对遥感找矿具有一定指导意义。     

Parameter determination from current–voltage characteristics of HgCdTe photodiodes in forward bias region

Current–voltage characteristics of HgCdTe photodiodes in the forward bias region have been modeled considering mechanisms including drift-diffusion current, recombination current, metal-semiconductor contact and constant series resistance. Moreover, a fitting method based on the genetic algorithm has been developed to obtain values of related physical parameters from the measured dynamic resistance–voltage curves. Fitting results of $n^+$ -on- $p$ planar devices with different cutoff wavelengths are presented to illustrate the model and method, which are available and promising in acquiring device parameter values and evaluating the electrode contact quality.     

Self-regulated Ni cluster formation on the TiO2(1 1 0) terrace studied using scanning tunneling microscopy

We have studied the growth mode and morphology of Ni clusters on a TiO₂(1 1 0) surface with a wide terrace using scanning tunneling microscopy (STM) at a low coverage (less than 3 atoms nm⁻²). The Ni clusters are formed on the terrace at the low coverage of 0.2 atoms nm⁻². Their average dimensions are constant in three directions up to 1 atoms nm⁻². The Ni clusters have an oval shape with average sizes of 1.8 nm (along [0 0 1]) × 1.4 nm (along (in the [1 1 0] directions). Above the coverage of 1.0 atoms nm⁻², an increase in the cluster height occurs, retaining an almost constant lateral size. It is proposed that the interaction of the Ni cluster and the support surface regulates the Ni cluster size.     

单个守恒型方程熵耗散格式中熵耗散函数的构造

对于一维单个守恒律方程,文[8]设计了一种非线性守恒型差分格式.此格式为二阶Godunov型的,用的是分片线性重构(reconstruction),重构函数的斜率是根据熵耗散得到的.格式满足熵条件.与传统的守恒格式不同的是此格式在计算过程中不仅用到了数值解还用到了数值熵.在此格式中一个所谓的熵耗散函数起到了很重要的作用,它在每一个网格的计算中耗散熵,以保证格式满足熵条件.文[8]中设计的熵耗散函数比较复杂,并且不是很完善.故数值地分析了在格式的构造中为何应给熵以一定的耗散,及应耗散多少.并且给出了一个新的以数值解的二阶差分作为基本模块的熵耗散函数.最后给出了相应的数值算例.     

基于超磁致伸缩材料的光纤光栅调谐范围研究

研究了基于超磁致伸缩材料实现对光纤布拉格光栅的动态调谐这一方案理论上可获得的最大调谐范围．利用超磁致伸缩换能器的输出特性,进行了超磁致伸缩换能器用于光纤布拉格光栅调谐的实验研究．分析了实验中影响可获得调谐范围的各种因素,如实际可获得的超磁致伸缩材料的特性、光纤布拉格光栅的特性以及换能器结构的设计．进一步讨论了在理论界限的前提下改进该方案可获得调谐范围的措施,并以施加预应力为例进行了实验验证．结果表明,通过给予超磁致伸缩材料合适的预应力,可以较明显地改善最大调谐范围．     

TX-100和CTAB交换动力学的核磁共振研究

运用核磁共振(NMR)方法分别测定了表面活性剂辛基苯聚氧乙烯醚(TX-100)和十六烷基三甲溴化铵(CTAB)在不同温度下的临界胶束浓度.阐述了应用1D NMR线型分析方法对表面活性剂快交换体系平均停留时间的定量测量.实验测量了TX-100和CTAB胶束溶液中表面活性剂分子在不同温度下的平均停留时间.结果显示,平均停留时间随温度的增加逐渐减小,说明TX-100和CTAB分子进出胶束的速率随温度的增加逐渐加快.利用阿伦尼乌斯公式拟合,获得了TX-100和CTAB的表观交换活化能,TX-100的表观交换活化能为17.6 k J/mol,CTAB的表观交换活化能为75.3 k J/mol.对TX-100和CTAB平均停留时间和表观交换活化能进行分析,得出平均停留时间和表观交换活化能与分子结构的关系:表观交换活化能反映的是疏水相互作用和静电斥力的大小;而平均停留时间不仅受活化能的影响,还与分子结构有关.     

新型全固态激光器作用过程中的激光参数分析

对影响LD泵浦的Nd∶GdVO4,Nd∶YVO4和Nd∶YAG激光器输出特性的增益介质长度、腔内损耗、输出镜透过率、泵浦光和振荡光的光斑大小进行了分析和数值模拟。当腔内固有损耗为2%,输出镜透过率为10%时,Nd∶Gd-VO4,Nd∶YVO4和Nd∶YAG晶体的振荡阈值分别为1.77W、0.55W和3.34W。在25W泵浦功率下,利用1mm长的Nd∶GdVO4,Nd∶YVO4和Nd∶YAG晶体可分别得到13.17W,13.26W和8.43W的输出功率,相应的输出镜最佳透过率分别为24%,44%和16%。     

Micellar core-shell-type acrylic-polyurethane hybrid materials with self-polishing property

Abstract

Marine fouling can be a serious problem in the shipping industry, since it increases the surface roughness of the hull and hence its frictional resistance to its movement through water. Antifouling paint can be defined as preventing the attachment of marine organisms onto surfaces. However, the most commonly used antifouling coating which is the tributyltin-based self-polishing copolymer causes the severe pollution of marine environment. Ammonium salt-based paints include tertiary amines as biocides which have effective biocidal and biodegradable properties without accumulation in the sea environment. However, ammonium salt-based coatings were too sensitive to seawater and became swollen. In this study, polyurethane-acrylic copolymers were synthesized by radical polymerization. These hybrid materials were found to form core–shell structures in aqueous media. Synthesis and properties of copolymers were investigated by Fourier transform-infrared spectrometer, proton-nuclear magnetic resonance, transmission electron microscopy, and dynamic light scattering. The polishing rate of self-polishing copolymer was determined from the reduction in dry film thickness after artificial seawater immersion under a dynamic condition.     

Assessment of bone calcium and phosphorus content using micro X‐ray fluorescence spectrometry (μ‐EDXRF): effects of long‐term cadmium poisoning

This study assesses whether the concentrations of biologically important elements in bones are altered by long‐term consumption of cadmium (Cd)‐contaminated water. Heavy metal poisoning has significant impact on humans, and pollutants such as Cd are often found at high concentrations in waterways. Twelve Sprague Dawley rats consumed water with 50 p.p.m. Cd (Cd group), and another 12 consumed normal water (control group). Six subjects from each group were sacrificed after 2 weeks and the others after 4 weeks. Spectra were acquired from the femur by using the EDAX Eagle III micro‐XRF setup, and quantitative calculations were performed by using the fundamental parameter method to determine the concentrations of elements. A bone calcium/phosphorus concentration ratio (Ca/P) of 2.07 ± 0.001 is observed in the spectra from control subjects after 2 weeks and 2.07 ± 0.001 after 4 weeks. In Cd subjects, Ca/P after 2 weeks is 2.04 ± 0.001 and after 4 weeks is 1.97 ± 0.003. Statistically significant differences are obtained when comparing controls with Cd subjects at both time points and when comparing Cd subjects at both time points. Cadmium poisoning significantly affects bone Ca and P concentrations, increasing the likelihood of osteoporosis and other bone diseases. Copyright © 2016 John Wiley & Sons, Ltd.