α－芳甲酰基烯酮二硫缩醛的新合成方法

以碳酸钾为碱，芳甲酰丙酮（１）与二硫化碳、卤代烃反应得到２－乙酰基－２－芳甲酰基烯酮硫代缩醛（２），２在乙硫醇钾作用下脱乙酰基生成标题化合物（３）。１→３的转化具有反应条件温和、产物产率高及对３中各种缩醛基均可通用等特点。     

刚性链嵌段共聚物研究 Ⅱ．含双酚S的聚醚醚酮共聚物合成与性能

series of multiblock copolymers composed of polyetheretherketone (PEEK) and 4, 4'-dihydroxydiphenylsulfone (DHDPS) were synthesized by polycondensation. The property of copolymers were characterics by DSC, IR, WAXD and TGA. The results indicate that the T_g of copolymers increases with increasing DHDPS content' When the DHDPS content of the copolymers is less than 22% (the average degree of polymerization of PEEK oligomers is more than 6), the copolymers are Crystalline polymers. The highest T_g of the Crystalline copolymers is 160℃,the lowest T_m is 304℃.     

化学蒸气沉积硅氧化合物调变HZSM－5沸石的研究

本文研究了正硅酸乙酯分别在无胺法和有胺法制得的ＨＺＳＭ－５沸石上的沉积过程，并用吸附，ＮＨ３－ＴＰＤ及异丙醇探针反应等手段表征了沉积后的样品，发现沉积仅在外表面上进行，可使孔口变小但不影响孔道内性质，显示有对于二甲苯分子的择形吸附能力，且在甲苯甲醇烷基化反应和二甲苯异构化反应中表现出良好的择形催化性能．     

白血病骨髓移植病人全血微量元素铜的变化及其意义

为了研究白血病骨髓移植病人全血微量元素铜的变化及其意义 ,用原子吸收光谱法检测了正常对照组与白血病骨髓移植患者预处理前及移植后骨髓空虚期全血微量元素铜的含量。结果表明 ,正常对照组全血铜浓度与白血病骨髓移植患者预处理前全血铜浓度差异无显著性 (P >0 0 5 ) ,而与骨髓空虚期全血铜浓度有显著性差异 (P <0 0 5 ) ,说明白血病缓解后血铜接近正常对照组水平 ,而白血病骨髓移植患者预处理后骨髓空虚期全血铜含量高于正常对照组 ,说明预处理影响微量元素铜的代谢 ,本文就其影响机理进行了研究     

重油催化裂化汽油中含氮化合物的分析

利用酸萃取技术浓缩分离重油催化裂化（RFCC）汽油中的氮化物，比较了两种萃取剂和两种油剂比对分离效果的影响，结果发现选用10％（体积分数）HCl作萃取剂，油剂比为10：1（体积比）时，碱性氮化物的提取率较高；浓缩分离出的氮化物用色谱－质谱联用方法对其进行了检测，结果表明RFCC汽油中的氮化物主要是C0－C2苯胺及少量吡啶类、喹啉类碱性氮化物。     

Synthesis of gramicidin S and its analogues via an on-resin macrolactamization assisted by a predisposed conformation of the linear precursors

A simple and efficient preparation of gramicidin S and its analogues is described. It involves solid-phase peptide synthesis and on-resin macrolactamization without side chain protection, affording cyclic products in high yield and high purity. The high specificity of the cyclization reaction was shown to originate in the formation of a pre-organized conformation of the linear biosynthetic precursor of gramicidin S. This facile method will provide convenient access to the analogues of the natural product for functional optimization to counter microbial resistance.     

Synthesis of Thiourea Derivatives on Soluble Polymeric Support

A modified poly(ethylene glycol) (PEG) has been developed as the soluble polymeric supports for liquid phase synthesis of novel thiourea derivatives.In each step of the sequence,the PEG-bound products were precipitated in cold Et2O and the unreacted materials and by-products were removed by simple filtration.The progress of reaction,purity of the isolation and the structure of the PEG-bound products were easily monitored by TLC,IR and ^1H NMR spectra.Representative thiourea derivatives were obtained in moderate yields with excellent purity from this modified PEG-bound product by the cleavage with 50% TFA/H2O.     

Surface modification studies of edge-oriented molybdenum sulfide nanosheets

We have synthesized edge-oriented MoS2 nanosheets by the evaporation of a single source precursor based on Mo(IV)-tetrakis(diethylaminodithiocarbomato). The surface chemistry of the MoS2 nanosheets has been studied in order to evaluate the chemical reactivities of the basal planes and edges. By irradiating the MoS2 nanosheet with a scanning infrared laser, micron-scale lithographical structures can be created due to laser-induced oxidation of MoS2 to form nanocrystalline MoO3. Preferential reactivities of the MoS2 basal edges in an electrochemical environment and during vapor phase deposition have been demonstrated. Functionalization of the basal plane with 1-pyrene acetic acid allows the immobilization of DNA and immunoglobins on the MoS2 basal plane.     

Vapor‐Phase Reaction of Citronellal over Mesoporous Molecular Sieves MCM‐41 and Zeolites

The vapor‐phase reaction of citronellal (CTN) at 220 °C and atmospheric pressure has been studied using mesoporous molecular sieves and zeolites in a fixed‐bed reactor. The primary products included isopulegol (IPG), menthone, and pulegol with subsequent reactions to form cyclic hydrocarbons. The CTN conversion and the product selectivity depend on the acidity and the textural property of catalysts. Lewis and/or Brönsted acid sites are essential for catalyzing this reaction. An increase of SiO₂/Al₂O₃ mol ratio diminishes the acid amount of all catalysts and enhances both the surface area and the structural order of MCM‐41. The catalytic activity follows the order of MCM‐41 > HZSM‐5 > Hβ > USY, in accordance with the relative total acid amount except that of MCM‐41. Despite its low acidity, Si‐MCM‐41 exhibits the best catalytic performance due to its uniform mesopores, large surface area and good stability; the CTN conversion and the IPG yield attain 91.9% and 58.6%, respectively, after at least 25 h time‐on‐stream.     

Hydrothermal Synthesis and X‐Ray Structural Characterization of Manganese,Nickel, and Cadmium Coordination Polymers Containing 2,3‐Pyridinedicarboxylate as Multidentate Ligands

Three divalent transiton‐metal complexes of 2,3‐pyridinedicarboxylate (2,3‐pda²), [Mn(2,3‐pda)‐(H₂O)3]_∞ ( 7 ), [Ni(2,3‐pda)(H₂O)3]_∞ ( 8 ), and [Cd2(2,3‐pda)₂(H₂O)]_∞ ( 9 ) have been hydrothermally synthesized and structurally characterized. X‐ray diffraction analyses reveal that compounds 7 and 8 are zigzag‐ and linear‐type one‐dimension (1D) coordination polymers, respectively, whereas compound 9 is a three‐dimension (3D) coordination polymer. A simple comparison of the coordination geometries with the available neutral analogues {M_x(2,3‐pda)_x(H₂O)_y}_∞ containing one or two divalent transition‐metal atoms and equal ligands in the presence or absence of coordinated water molecules is also presented.