手性大孔磷酸镓Hit-5的水热合成与晶体结构

本文采用水热合成法制备了一个三维手性大孔开放骨架磷酸镓Ga16P16O75·4[1,6-C6H18N2]·[C2H10N2]·2H2O(简称Hit-5).反应起始原料摩尔配比为:1 GaOOH:15 H3PO4:7.5 H2N(CH2)6NH2:0.5 C2H8N2:555 H2O.Hit-5属正交晶系,P21212空间群,晶胞参数:a=0.8671(1)nm,b=1.7945(1)nm,c=0.9101(1)nm,β=108.33(1)°,V=1.3443(2)nm3,Z=4.Hit-5的骨架是由Ga3P3六聚体和Ga4P4八聚体两个不同的二级结构单元通过共顶点联接构成三维纳米孔结构,在[001]方向呈现16-元环孔道.     

燃烧剂对低温燃烧合成Pr-CeO2粉体结构与性能的影响

以乙酸铵和柠檬酸为燃烧剂,Ce(NO3)3·6H2O和Pr6O11为主要原料,采用低温燃烧法(LCS)制备了Ce0.95Pr0.5O2纳米晶粉体.用DSC、XRD、SEM及色度测试等手段研究了Ce0.95Pr0.5O2纳米晶微粒前驱体的着火温度、产物晶体结构、晶体形貌及色度.结果表明:乙酸铵和柠檬酸作为燃烧剂的反应前驱体着火温度分别在250℃和300℃左右.两种燃烧产物均为单一的萤石型固溶体.与柠檬酸相比,乙酸铵作为燃烧剂得到的燃烧产物结晶程度更完善、Pr离子进入CeO2晶格的含量更多、呈色更好,且颗粒的团聚程度变小.根据Scherrer公式计算,用两种燃烧剂制备产物的平均晶粒尺寸分别为20～30 nm和10～15 nm,为纳米晶颗粒.最后得到Ce0.95Pr0.5O2粉体的颗粒尺寸则在200～300 nm之间.乙酸铵与硝酸铈的最佳摩尔配比为2:1,柠檬酸与硝酸铈的最佳摩尔配比为3:1.     

用化学溶液方法在Ni-5at%W基底上制备La2Zr2O7过渡层的研究

La2Zr2O7(LZO)过渡层以其独特的物理化学性质越来越受到人们的关注。本文以乙酰丙酮镧和乙酰丙酮锆为前驱盐,丙酸为溶剂配置前驱液,用化学溶液方法(CSD)在具有立方织构的Ni-5at%W基底上制备了LZO过渡层薄膜。研究了前驱液成分、性质以及退火温度对LZO成相以及取向的影响。用常规XRD和X射线四环衍射仪分析了LZO薄膜的相成分和织构。结果显示,在1050℃下退火可以获得强立方织构的LZO薄膜,其中(222)峰的Phi扫描半高宽值为8.95°;(400)峰的Chi扫描半高宽值为6.8°。用高分辨扫描电子显微镜(FE-SEM)观察到LZO薄膜表面均匀致密,没有裂纹和空洞。     

Facile Fabrication of 1-Methylimidazole/Cu Nanozyme with Enhanced Laccase Activity for Fast Degradation and Sensitive Detection of Phenol Compounds

Facile construction of functional nanomaterials with laccase-like activity is important in sustainable chemistry since laccase is featured as an efficient and promising catalyst especially for phenolic degradation but still has the challenges of high cost, low activity, poor stability and unsatisfied recyclability. In this paper, we report a simple method to synthesize nanozymes with enhanced laccase-like activity by the self-assembly of copper ions with various imidazole derivatives. In the case of 1-methylimidazole as the ligand, the as-synthesized nanozyme (denoted as Cu-MIM) has the highest yield and best activity among the nanozymes prepared. Compared to laccase, the K_m of Cu-MIM nanozyme to phenol is much lower, and the v_max is 6.8 times higher. In addition, Cu-MIM maintains excellent stability in a variety of harsh environments, such as high pH, high temperature, high salt concentration, organic solvents and long-term storage. Based on the Cu-MIM nanozyme, we established a method for quantitatively detecting phenol concentration through a smartphone, which is believed to have important applications in environmental protection, pollutant detection and other fields.     

Tailoring Pore Structure and Morphologies in Covalent Organic Frameworks for Xe/Kr Capture and Separation

As a rising star among porous solid materials, covalent organic frameworks(COFs) with excellent properties including but not limit to facilely controllable structure, high porosity, and multi-chemical functionality represent significant potential for efficient ¹²⁷Xe/⁸⁵Kr capture and separation. In this study, through tuning the length of the organic ligands, two-dimensional(2D) COF mate-rials with identical connection group but different pore properties, denoted as ATFG-COF and TpPa-COF with AA-stacking model and TpBD-COF with AB-stacking model were synthesized and tested for Kr and Xe adsorption for the first time. Adsorption measurements indicate that the narrower pore apertures and higher porosity are conducive for COF materials to capture Xe and Kr. Furthermore, the Henry's constant, isosteric heat of adsorption(Q_st), and ideal adsorbed solution theory(IAST) selectivity of ATFG-COF, the pore size of which is closest to the kinetic diameter of the Xe atom(0.41 nm) among 2D COF materials, were carried out based on the single component sorption isotherms. The results illustrate that the high isosteric heat values of Xe/Kr adsorption on ATFG-COF are 25 and 16 kJ/mol at room temperature, respectively. Henry's law predicts that the selectivity factor of Xe to Kr is 6.07, consistent with the adsorption selectivity(ca. 6) calculated based on the IAST.     

Palladium-catalyzed hydrosilylation of ynones to access silicon-stereogenic silylenones by stereospecific aromatic interaction-assisted Si–H activation

Hydrosilylation is one of the most important reactions in synthetic chemistry and ranks as a fundamental method to access organosilicon compounds in industrial and academic processes. However, the enantioselective construction of chiral-at-silicon compounds via catalytic asymmetric hydrosilylation remained limited and difficult. Here we report a highly enantioselective hydrosilylation of ynones, a type of carbonyl-activated alkynes, using a palladium catalyst with a chiral binaphthyl phosphoramidite ligand. The stereospecific hydrosilylation of ynones affords a series of silicon-stereogenic silylenones with up to 94% yield, 20:1 regioselectivity and 98:2 enantioselectivity. The density functional theory(DFT) calculations were conducted to elucidate the reaction mechanism and origin of high degree of stereoselectivity, in which the powerful potential of aromatic interaction in this reaction is highlighted by the multiple C–H-π interaction and aromatic cavity-oriented enantioselectivitydetermining step during desymmetric functionalization of Si–H bond.     

Bioavailability Enhancement of Cepharanthine via Pulmonary Administration in Rats and Its Therapeutic Potential for Pulmonary Fibrosis Associated with COVID-19 Infection

Cepharanthine (CEP) has excellent anti-SARS-CoV-2 properties, indicating its favorable potential for COVID-19 treatment. However, its application is challenged by its poor dissolubility and oral bioavailability. The present study aimed to improve the bioavailability of CEP by optimizing its solubility and through a pulmonary delivery method, which improved its bioavailability by five times when compared to that through the oral delivery method (68.07% vs. 13.15%). An ultra-performance liquid chromatography tandem-mass spectrometry (UPLC-MS/MS) method for quantification of CEP in rat plasma was developed and validated to support the bioavailability and pharmacokinetic studies. In addition, pulmonary fibrosis was recognized as a sequela of COVID-19 infection, warranting further evaluation of the therapeutic potential of CEP on a rat lung fibrosis model. The antifibrotic effect was assessed by analysis of lung index and histopathological examination, detection of transforming growth factor (TGF)-β1, interleukin-6 (IL-6), α-smooth muscle actin (α-SMA), and hydroxyproline level in serum or lung tissues. Our data demonstrated that CEP could significantly alleviate bleomycin (BLM)-induced collagen accumulation and inflammation, thereby exerting protective effects against pulmonary fibrosis. Our results provide evidence supporting the hypothesis that pulmonary delivery CEP may be a promising therapy for pulmonary fibrosis associated with COVID-19 infection.     

基于铰链式六面顶压机的二级6-8模超高压大腔体内置加热元件的设计与温度标定

 首次报道了一种新型的基于铰链式六面顶压机的二级6-8模大腔体静高压装置的内置加热元件的设计与温度标定。此加热组装结构简单,升温快,保温效果好,并有效地解决了国外基于两面顶压机构架下的二级6-8模内加热组装中热电偶在施加压力时易断的问题。以低成本的碳管为加热元件,采用直接和间接两种加热方式,用双铂铑（Pt6%Rh-Pt30%Rt）B型热电偶进行温度测量,并根据实验过程中加热功率与腔内实际温度的关系,对不同压力下腔体内的温度进行了标定。实验结果表明：此加热系统的油压达到40 MPa（腔体压力约10 GPa）时,温度可以达到1 700 ℃以上;在油压为30 MPa、样品室温度为1 000 ℃时,保温时间可达2 h,甚至更长;实验中获得样品的直径可达3 mm,高度可达7 mm,实现了在高温超高压条件下大样品的制备,满足了实验对产生高温超高压条件的需要。     

光纤耦合数码系统传像特性

建立了光纤传像元件与光电阵列器件的匹配耦合模型,引入变动因子反映像素光纤排列的不确定性,进行了光纤耦合传像特性的仿真研究.针对9×9 μm2光敏元的阵列器件,分析了光纤传像元件结构参数变化对系统分辨率的影响,在光纤直径约为光敏元尺寸1/3时获得了相对经济合理的匹配结构,表明光纤耦合数码系统设计时必须考虑优化匹配问题.仿真结果还解释了系统的图像输出存在条纹和局部结构背景的原因,给出了相应的数值分析方法.     

激光激发水中产生超声波的实验研究

采用压电陶瓷水听器研究了Nd：YAG脉冲激光激发水中产生瞬态超声波的特性,给出了声压信号随距离的变化关系。研究结果表明：用激光产生水下声波是完全可行的。当观测点与光击穿区的距离r远大于柱体长度时,垂直于光传播方向的激光瞬态超声波幅值与r成反比;当观测点与光击穿区的距离r很小时,垂直于光传播方向的声压幅值与产成反比。此外,当激光入射角度发生变化,超声脉冲的幅值也随之发生变化,其幅值在激光束垂直入射的时候最大。