Indirect laser photoacoustic detection for trace samples on membranes

An indirect laser photoacoustic technique is described. The basic principle, the experimental set-up and the influencing factors are discussed in detail. This method was used to quantify phenylamine, arginine and methylene blue on membranes. The linear ranges of the calibration curve are up to two orders of magnitude. With 1 microliter of sample solution, the detection limits are 0.25, 1.52 and 0.14 pmol for phenylamine, arginine and methylene blue, respectively.     

Controlled vesicle self-assembly in microfluidic channels with hydrodynamic focusing

Traditional liposome preparation methods are based on mixing of bulk phases, leading to inhomogeneous chemical and/or mechanical conditions during formation; hence liposomes are often polydisperse in size and lamellarity. Here we show the formation of liposomes that encapsulate reagents in a continuous two-phase flow microfluidic network with precision control of size from 100 to 300 nm by manipulation of liquid flow rates. We demonstrate that by creating a solvent-aqueous interfacial region in a microfluidic format that is homogeneous and controllable on the length scale of a liposome, we can facilitate the fine control of liposome size and polydispersity.     

Combined charge and spin density experimental study of the yttrium(III) semiquinonato complex Y(HBPz3)2(DTBSQ) and DFT calculations

High-resolution X-ray diffraction and polarized neutron diffraction experiments have been performed on the Y-semiquinonate complex, Y(HBPz3)2(DTBSQ), in order to determine the charge and spin densities in the paramagnetic ground state, S = (1/2). The aim of these combined studies is to bring new insights to the antiferromagnetic coupling mechanism between the semiquinonate radical and the rare earth ion in the isomorphous Gd(HBPz3)2(DTBSQ) complex. The experimental charge density at 106 K yields detailed information about the bonding between the Y3+ ion and the semiquinonate ligand; the topological charge of the yttrium atom indicates a transfer of about 1.5 electrons from the radical toward the Y3+ ion in the complex, in agreement with DFT calculations. The electron density deformation map reveals well-resolved oxygen lone pairs with one lobe polarized toward the yttrium atom. The determination of the induced spin density at 1.9 K under an applied magnetic field of 9.5 T permits the visualization of the delocalized magnetic orbital of the radical throughout the entire molecule. The spin is mainly distributed on the oxygen atoms [O1 (0.12(1) mu B), O2(0.11(1) mu B)] and the carbon atoms [C21 (0.24(1) mu B), C22(0.20(1) mu B), C24(0.16(1) mu B), C25(0.12(1) mu B)] of the carbonyl ring. A significant spin delocalization on the yttrium site of 0.08(2) mu B is observed, proving that a direct overlap with the radical magnetic orbital can occur at the rare earth site and lead to antiferromagnetic coupling. The DFT calculations are in good quantitative agreement with the experimental charge density results, but they underestimate the spin delocalization of the oxygen toward the yttrium and the carbon atoms of the carbonyl ring.     

An immobiline DryStrip application method enabling high-capacity two-dimensional gel electrophoresis

In the field of proteomics the need to detect low-abundance cellular components, such as regulatory proteins, is of critical importance. Two-dimensional polyacrylamide gel electrophoresis (2-D PAGE) is one of the most commonly used separation tools for these biological investigations. In this paper we report an alternative micropreparative 2-D PAGE sample application method, called the "paper bridge loading" method. This method makes it possible to apply a larger sample volume to commercially available immobilized pH gradient (IPG) strips. The Vh products required for focusing are only marginally longer than those used in analytical experiments. The method was compared to traditional cup loading and in-gel rehydration. With 18 cm long narrow-range Immobiline DryStrip pH 4.5-5.5, the "paper bridge" method allowed the application of 10 mg human plasma proteins compared to 3 mg with traditional loading methods. The corresponding figures using Escherichia coli sample was found to be 6 mg and less than 2 mg, respectively. The paper bridge method also showed the best results in terms of spot resolution and separation of high molecular weight proteins.     

Bond additivity corrections for G3B3 and G3MP2B3 quantum chemistry methods

We have developed bond additivity correction (BAC) procedures for the G3-based quantum chemistry methods, G3B3 and G3MP2B3. We denote these procedures as BAC-G3B3 and BAC-G3MP2B3. We apply the procedures to compounds containing atoms from the first three rows of the periodic table including H, B, C, N, O, F, Al, Si, P, S, and Cl atoms. The BAC procedure applies atomic, molecular, and pairwise bond corrections to theoretical heats of formation of molecules. The BAC-G3B3 and BAC-G3MP2B3 procedures require parameters for each atom type but not for each bond type. These parameters have been obtained by minimizing the error between the BAC-G3B3 and BAC-G3MP2B3 predictions and the experimental heats of formation for a 155 molecule reference set, containing open and closed shell molecules representing various functional groups, multireference configurations, isomers, and degrees of saturation. As compared to former BAC-MP4, BAC-G2, and BAC-hybrid methods, BAC-G3B3 provides better agreement with experiment for a wider range of chemical moieties, including highly oxidized species involving SOx s, NOx s, POx s, and halogens. The BAC-G3B3 and BAC-G3MP2B3 procedures are applied to an extended test suite involving 273 compounds. We assess the overall quality of BAC-G3B3 with experiments and other theoretical approaches. For the reference set, the average error for the BAC-G3B3 results is 0.44 kcal/mol as compared to 0.82 kcal/mol for the raw G3B3. For the extended test set, the average error for the BAC-G3B3 results is 0.91 kcal/mol as compared to 1.38 kcal/mol for the raw G3B3. As compared to the other BAC procedures, the improved predictive capability of BAC-G3B3 and BAC-G3MP2B3 procedures is, to a large extent, due to the improved quality of G3-based methods resulting in much smaller BAC correction terms.     

Enantioseparations using capillary electromigration techniques in nonaqueous buffers

This review summarizes recent developments in the field of enantioseparations in capillary electromigration techniques using nonaqueous background electrolytes. The more established and rather intensively reviewed field of nonaqueous chiral capillary electrophoresis (NAQ-CE) is covered in less detail whereas more attention is paid to the relatively new field of nonaqueous capillary electrochromatography (NAQ-CEC).     

Pulsed photothermal phase-shift spectroscopy for weak absorption measurement

A novel photothermal phase-shift spectroscopy configuration based on the retro-reflected beam interference has been developed and its operational principle is described. The weak absorption measurement ability of this technique is experimentally proven with a water/ethanol solution of standard Pyronine G dye and the limit of detection is found to be 1.8 x 10(-6) absorbance. Potential applications of the technique are discussed.     

煤油中TBP、HDPB和H_2MBP的气相色谱测定

气相色谱法已用于煤油中磷酸三丁酯(TBP)、磷酸二丁酯(HDBP)和磷酸丁酯(H_2MBP)的测定。在分析前,后两种化合物通过与二异丙基醚中的重氮甲烷反应转换成对应的甲酯。用同样方法可测定γ射线辐射30％TBP-煤油-3mol dm~(-3) HNO_3体系生成的HBDP和H_2MBP。