Liquid chromatography and mass spectrometry determination of aromatic amines in hydrolysed urine from workers exposed to thermal degradation products of polyurethane

Chromatographia - An LC-MS method is described for the determination of 4,4′-MDA (4,4′-methylene dianiline) in hydrolysed urine as a biomarker for exposure to 4,4′-MDI...     

Limits of resolution and speed of analysis in linear chromatography with and without focusing

Chromatographia - Previously [11], the theoretical limit ofresolution in one class of chromatographic conditions was found and its proof was briefly outlined. Here, the theoretical limits...     

End unit effect on the Tg of differentiated series of perfluoro-poly (oxymethylene-co-oxyethylene) oligomers

Twelve series of linear oligomers of four different degrees of polymerization (x_n = 8.77−41.55), having a common perfluorinated random copolymeric chain as molecular body and two equal foreign end units of one of the types listed in Table 1, have been synthesized by derivatization of base samples of one of them having a diolic---CH₂OH functionality. The glass transition temperature T_g of all the series was measured and thus examined as a function of x_n. A clear end unit effect is observed, dominantly determined in every series by chemical nature and structure of the end units, quantitatively expressed at any x_n by different positive or negative T_g deviations from the common asymptotic T_g∞ value. The results are also discussed in terms of copolymer end effect and of relation between T_g and end copolymeric composition.     

Large Water-Soluble Cyclophanes with Convergent Intracavity Functionality

New tricyclic spacers, readily available through fourfold Mannich reaction of substituted dibenzyl ketones, were introduced into a series of ten H₂O-soluble cyclophanes with spacious preorganized cavity binding sites. These spacers provide H₂O-solubility with amine or crown-ether functionality remote from the cyclophane cavity while directing functional groups such as keto or OH groups in a precise geometrical array inside the cavity. The cyclophanes were designed to include organic substrates via a combination of apolar and specific polar functional group interactions. The X-ray crystal-structure analysis of the tritopic receptor 18 with one potential neutral-molecule and two cation-binding sites showed a large rectangular open cavity with dimensions of roughly 9 × 14 Å and a spacing of 9.7 Å between the O-atoms of two convergent C?O groups. Despite the binding-site preorganization, cyclophanes incorporating two of the new spacers did not show any substrate binding in aqueous solutions. The failure of these systems to function as receptors is mainly due to steric hindrance to important cyclophane aromatic ring-guest interactions. Also, the favorable solvation of the intracavity functionality may prevent the formation of complexes. Hybrid receptors constructed from the novel spacers and diphenylmethane units were found to bind flat aromatic substrates as well as bulky [4.2]paracyclophanes. The observed large differences in stability (ΔΔG°> 2 kcal mol^?1) of the complexes formed by three structurally closely related hybrid receptors with convergent C?O, OH or CH₂ groups and 6-hydroxynaphthalene-2-carbonitrile as guest can be explained by a strong solvation effect of the convergent functional groups on apolar inclusion complexation.     

Theory of relaxed density matrices: Application to second-order response properties

The evaluation of second derivatives of the electronic energy for nonvariational wave functions using an energy functional is discussed. It is shown that, in certain cases, the formation of the first-order relaxed density matrix leads to an efficient algorithm for the calculation of second-order response properties. Detailed formulas are given for second-order Møller–Plesset perturbation theory. © 1994 John Wiley & Sons, Inc.     

Application of differential electrolytic potentiometry for detection in flow injection analysis

The applicability of differential electrolytic potentiometry as a detection system in flow injection analysis is investigated. A computer-controlled injector which delivers precise volumes of sample solutions in a reproducible manner was developed. Conditions such as current density employed, the concentrations of the solutions used and the flow rate were optimized. Chloride in water was determined by means of this system. The relation between chloride concentration and the measured signal was found to be Nernstian for solutions of concentrations above 6 μg ml⁻¹ chloride. For solutions below this concentration, the relation is linear.     

Investigation of the conditions for feeding filamentary silicon crystals,growing in a reactor with hot walls

An estimate of the factors which influence the rate of growth of filamentary silicon crystals in a standard chloride system using a quartz reactor with hot walls is given. It is shown that a diffusion form of crystallization is observed under the conditions investigated.Voronezh State Technical University. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 10, pp. 22–26, October, 1995.     

Three-dimensional atom probe study of the segregation behaviour of Ni91Pt9 alloy after sputtering

To investigate local ordering and segregation phenomenon in a Ni91Pt9-alloy after sputtering and annealing a 3D optical atom probe (OAP) has been used. The specimen tips have been prepared from polycrystalline samples. To sputter the samples a separate preparation chamber with a scannable Ar-sputter-gun is connected to the OAP vessel. When necessary, the sample can be electrically heated to induce segregation and cure the altered layer. After a heat treatment of a Ni91 at. %Pt 9 at.% specimen at 1100 K the surface of a (111)-oriented specimen is enriched in platinum by a factor of two in relation to the bulk. The phenomenon of short-range ordering has been investigated on the surface and in the subsurface volume. A 3D reconstruction of this annealed NiPt specimen shows regions with high concentration of platinum that gives an indication at short-range ordering. Uniform sputtering of the tip without a heat treatment induces a decisive depletion of Pt on the surface and the following subatomic layers. The atom-probe results of specimens in thermal equilibrium are in close agreement to further surface sensitive results obtained from Ion Scattering Spectroscopy (ISS) and Auger Electron Spectroscopy (AES).     

Improved spacer design and cost reduction in an electrodialysis system

In electrodialysis using thin membranes and spacers, the compactness of the membrane cell-pairs leads to a small potential drop, and hence to energy saving. The spacer design itself has a great effect on the cost of the plants, since spacers act as turbulence promoters. A careful design, to increase the mass transfer coefficients, can reduce the membrane surface area required for a given application. Limiting current measurements, cell-pair resistance and pressure losses are presented for several thin spacers, for different flow-velocity values and feed water concentrations. It was possible to find an advantageous geometry of the separating mesh leading to substantial savings on investment and operation costs.     

Studies of the compositions of Pd(II) hydrolysis products

The characterization of the clusters formed on alkaline hydrolysis of [PdCl₄]^2– was performed using¹⁷O,²³Na,³⁵Cl,¹³³Cs NMR and UV spectroscopy. The chemical composition of the clusters was found to be [Pd(OH)₂] _n ·nNaCl. No mononuclear oxo- or hydroxocomplexes were detected. The spatial structure of the clusters is stabilized by alkali metal cations.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 675–679, April, 1993.