Influence of Pretreatment of Expanded Graphite on Its Sorption Properties with Respect to Petroleum

Petroleum sorption on expanded graphite prepared from residual graphite hydrosulfate at 300-900°C was studied as influenced by pretreatment of the sorbent with water.     

Optical and photoelectric properties of helical quantum wires

The appearance of a steady current in a helical quantum wire under circularly polarized light is predicted. The effect is associated with the appearance of a travelling electromagnetic wave in the coordinate system related to the wire, the wavelength being determined by the period of the helix. The gyrotropy of a medium consisting of parallel quantum wires is considered.     

Studies on recoil proton tracks in NTA films with the T(d,n)He reaction

Recoil proton tracks in nuclear emulsion are counted by scanning them using strip, square or circular field of view of optical microscope. In this paper, the overestimate due to the edge effects in counting recoil proton tracks at different neutron energies produced from the T(d,n)⁴He reaction has been determined by measuring the true track density in NTA film. The overestimate has also been calculated using the measured value of the mean projected track length (L) in the film. The percentage of measured overestimates has been compared with those obtained by calculation and the results agree reasonably well. Fading effect in NTA film has been studied and found to be 22% more in the summer than in the winter season. A great reduction in fading rate could be achieved if the films are desiccated and sealed in highly pure dry nitrogen maintained at an over-pressure of 1000 Pa to reduce water vapour ingress. After the edge effect correction, the sensitivity of NTA film has been calculated from (1.72±0.08)×10⁻³ tracksn⁻¹ to (1.97±0.16)×10⁻³ tracksn⁻¹ in the neutron energy ranges from 15.91 to 18.88 MeV. The response was found to be from 0.24±0.02 trackscm⁻² permSv to 0.26±0.01 trackscm⁻² permSv in the same energy range.     

Annihilation of positrons in hydrogen-saturated titanium

The effect of atomic hydrogen on the electronic structure of α-titanium samples is studied using the electron-positron annihilation methods. It is shown that different states of hydrogen atoms are manifested in different ways in the positron lifetime distribution spectrum. The results of theoretical calculations of the first component of the positron lifetime are in accord with the obtained experimental data.     

Preparation and Characteristics of a Cation Exchanger Based on Oxidized Anthracite

The features of anthracite oxidation as influenced by temperature and time were determined. Physicochemical and sorption characteristics of the resulting cation exchanger were studied.     

THE SOUND FIELD OF A ROTOR IN A STATIONARY DUCT

A method is developed for the prediction of noise from rotors in an axisymmetric duct at rest. The technique combines a previously developed model for noise from disc sources with a boundary integral equation method for scattering from the duct surface. Recent developments in the theory of Gaussian quadrature and generalized elliptic integrals are used to simplify the implementation of the formulation. The sound field of a simplified model ducted rotor is then calculated and its structure examined in the framework of known features of the field around rotating sources. It is found that, as for an open rotor, the sonic radius plays an important role in the structure of the field.     

Novel route to synthesis of allyl starch and biodegradable hydrogel by copolymerizing allyl‐modified starch with methacrylic acid and acrylamide

Maize starch was modified by allyl chloride adopting an interfacial reaction technique with cetyltrimethyl ammonium bromide as a phase‐transfer catalyst and pyridine as an acid acceptor. The degree of substitution was determined from an increasing carbon content of the modified starch. The percentage of carbon and hydrogen of the allyl‐modified starch was estimated by elemental analysis (C, H, and N), and the product characterization was done through ¹H NMR and ¹³C NMR analyses. The allyl‐modified starch was then copolymerized with methacrylic acid and a combination of methacrylic acid and acrylamide at 50 and 70 °C with potassium persulfate as an initiator. The copolymer thus formed swelled in distilled water after neutralization with sodium carbonate. The percentage of absorption capacity of the hydrogels was determined with distilled water and 0.9% NaCl solution. The highest percentage of absorption, 6500%, was achieved for the developed hydrogel containing allyl starch and acrylic monomer in a 1.7:1 w/w ratio and acrylic monomer, namely, methacrylic acid and acrylamide in a 3.2:1 w/w ratio. The study on biodegradability of the developed hydrogel showed that the hydrogel is degradable in the presence of diastase (amylase). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1650–1658, 2003     

Determination of the rheological behavior of epoxy–amine thermosets by dynamic mechanical analysis: Isothermal methods versus nonisothermal methods

The reticulation process of an epoxy resin using an amine as a cure agent was studied at different temperatures and concentrations of the cure agent with dynamic mechanical thermal analysis. The study was performed under both isothermal and nonisothermal conditions, and a temperature–time–transformation diagram was obtained. The measurements from the two modes gave similar results, although the nonisothermal mode required fewer experiments. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1965–1977, 2003     

Ionization of two-electron atom in ultrashort laser pulse

The method of numerical integration of the classical equations of motion was used to study interaction of a model two-electron atom with ultrashort laser pulses. Mechanisms and specific features of the ionization process were analyzed in a broad range of laser-field parameters.     

Excited-state dynamics in Yb3+-Ho3+-doped fluoroindate glasses

This work has been partially supported by Gobierno Autonomo de Canarias under contact number 226–265/93.