Functionalisation of polypropylene non-woven fabrics (NWFs)

Surface oxyfluorination had been carried out on polypropylene non-woven fabric (PP NWF) samples of different morphologies and pore sizes. The modified surfaces were characterised by Attenuated Total Reflectance Fourier Transform InfraRed (ATR-FTIR)-spectroscopy, FTIR imaging microscopy, X-Ray Photoelectron Spectroscopy (XPS), Electron Spin Resonance (ESR) spectroscopy, Differential Scanning Calorimetry (DSC), X-Ray Diffraction (XRD) analysis, Scanning Electron Microscopy (SEM), dynamic rheometry and Thermo-Gravimetry (TG). ATR-FTIR and XPS techniques revealed the presence of ?CCF, ?CCF₂, ?CCHF and ?CC(O)F groups. The formed ?CC(O)F groups mostly got hydrolysed to ?CCOOH groups. The C=O groups of alpha-haloester, and the C=C stretching of the formed ?CCF=C(OH)?C groups could also be detected. Long-lived radicals could be detected on the functionalised surfaces as middle-chain peroxy radicals by ESR spectroscopy. SEM micrographs showed slight roughening of the oxyfluorinated surfaces. Oxyfluorination had no significant effect on the crystalline structure and phase composition of the PP NWF samples supported by DSC and XRD measurements. The molecular mass of the samples were unaffected by the oxyfluorination treatment as proved by oscillating rheometry. The surface modification, however, significantly affected the thermal decomposition but not affected the thermo-oxidative decomposition of PP NWFs. Different morphologies and pore sizes of PP NWF samples resulted in reproducibility of the findings, although did not substantially affect surface functionalisation.     

Enhanced photocatalytic degradation of azo dyes using nano Fe3O4

Nanosized magnetic Fe₃O₄ synthesized via sonochemical route was used as a photocatalyst for the degradation of azo dyes, methyl red and congo red. The novelty of the photo catalyst is its easy recovery by magnetic force and its recycling ability due to its long-term stability, in addition to its cost effectiveness, non-toxicity and non-carcinogenicity. A detailed feasibility study has been carried out on the photocatalytic degradation of the azo dyes at various pH and at various concentrations of photocatalyst, dye and H₂O₂. The presence of photocatalyst is found to significantly accelerate the degradation of azo dyes and the optimal dosage is found to be 0.075 and 0.2?g/l for methyl red and congo red, respectively. Langmuir?CHinshelwood kinetic analysis revealed pseudo-first-order kinetics for the photocatalytic degradation of the dyes and the degradation products were identified using spectral analysis. The degradation study revealed the following order of reactivity: Photo-Fe₃O₄?>?Photo-H₂O₂?>?Fe₃O₄?>?H₂O₂.     

The influence of chemical activation of the M45K20 sorbent on the heat effects of sorption of ammonium ions

Calorimetric measurements were performed and the heat effects of sorption of ammonium ions from aqueous solutions by the M₄₅K₂₀ natural sorbent and its acid- and alkali-activated forms were calculated.     

Ti(III)-promoted cyclizations. Application to the synthesis of (E)-endo-bergamoten-12-oic acids. Moth oviposition stimulants isolated from Lycopersicon hirsutum

The Ti(III)-promoted radical cyclization of epoxyenone 8 is described as the key step to access the diol 10 as a convenient starting material of the target molecules. The synthesis of β-(E)-endo-bergamoten-12-oic acid 2a from (+)-8,9-epoxycarvone 8 was successfully achieved by Suzuki-Miyaura coupling of the terminal alkene 20 with β-iodomethacrylate 21c, followed by deprotection and dehydration processes. Moreover, synthesis of the α-(E)-endo-1-hydroxy-bergamoten-12-oic acid derivative 34 was achieved by iterative elongation processes of the diol 10 lateral chain.     

High resolution vacuum ultraviolet emission spectrum of D(2) from 78 to 103 nm: The D (1)Pi(u)-->X (1)Sigma(g) (+) and D(') (1)Pi(u) (-)-->X (1)Sigma(g) (+) band systems

The emission spectrum of the D(2) molecule has been studied at high resolution in the vacuum ultraviolet region 78.5-102.7 nm. A detailed analysis of the two D (1)Pi(u)-->X (1)Sigma(g) (+) and D(') (1)Pi(u) (-)-->X (1)Sigma(g) (+) electronic band systems is reported. New and improved values of the level energies of the two upper states have been derived with the help of the program IDEN [V. I. Azarov, Phys. Scr. 44, 528 (1991); 48, 656 (1993)], originally developed for atomic spectral analysis. A detailed comparison is made between the observed energy levels and solutions of coupled equations using the newest ab initio potentials by Wolniewicz and co-workers [J. Chem. Phys. 103, 1792 (1995); 99, 1851 (1993); J. Mol. Spectros. 212, 208 (2002); 220, 45 (2003)] taking into account the nonadiabatic coupling terms for the D (1)Pi(u) state with the lowest electronic states B (1)Sigma(u) (+), C (1)Pi(u), and B(') (1)Sigma(u) (+). A satisfactory agreement has been found for most of the level energies belonging to the D and D(') states. The remaining differences between observation and theory are probably due to nonadiabatic couplings with other higher electronic states which were neglected in the calculations.     

Dual-Color Photoconvertible Fluorescent Probes Based on Directed Photooxidation Induced Conversion for Bioimaging

We herein present a new concept to produce dual-color photoconvertible probes based on a mechanism called Directed Photooxidation Induced Conversion (DPIC). As a support of this mechanism, styryl-coumarins ( SCs ) bearing Aromatic Singlet Oxygen Reactive Moieties (ASORMs) like furan and pyrrole have been synthesized. SCs are bright fluorophores, which undergo a hypsochromic conversion upon visible light irradiation due to directed photooxidation of the ASORM that leads to the disruption of conjugation. SC-P , a yellow emitting probe bearing a pyrrole moiety, converts to a stable blue emitting coumarin with a 68 nm shift allowing the photoconversion and tracking of lipid droplet in live cells. This new approach might pave the way to a new generation of photoconvertible dyes for advanced bioimaging applications.     

ChemInform Abstract: Electronic Structure Calculations for the Ternary Intermetallic Compounds A2MX and AMX2 (A: Li; M: Rh,Pd, Ir,Pt; X: Al,Ga, In) Using Density‐Functional Theory.

ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 100 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable via the “References” option.     

Conformationally Controlled sp3-Hydrocarbon-Based α-Helix Mimetics

With over 60 % of protein–protein interfaces featuring an α-helix, the use of α-helix mimetics as inhibitors of these interactions is a prevalent therapeutic strategy. However, methods to control the conformation of mimetics, thus enabling maximum efficacy, can be restrictive. Alternatively, conformation can be controlled through the introduction of destabilizing syn-pentane interactions. This tactic, which is often adopted by Nature, is not a common feature of lead optimization owing to the significant synthetic effort required. Through assembly-line synthesis with NMR and computational analysis, we have shown that alternating syn–anti configured contiguously substituted hydrocarbons, by avoiding syn-pentane interactions, adopt well-defined conformations that present functional groups in an arrangement that mimics the α-helix. The design of a p53 mimetic that binds to Mdm2 with moderate to good affinity, demonstrates the therapeutic promise of these scaffolds.     

Degradable Cationic Nanohydrogel Particles for Stimuli‐Responsive Release of siRNA

Well‐defined nanogels have become quite attractive as safe and stable carriers for siRNA delivery. However, to avoid nanoparticle accumulation, they need to provide a stimuli‐responsive degradation mechanism that can be activated at the payload's site of action. In this work, the synthetic concept for generating well‐defined nanohydrogel particles is extended to incorporate disulfide cross‐linkers into a cationic nanonetwork for redox‐triggered release of oligonucleotide payload as well as nanoparticle degradation under reductive conditions of the cytoplasm. Therefore, a novel disulfide‐modified spermine cross‐linker is designed that both allows disassembly of the nanogel as well as removal of cationic charge from residual polymer fragments. The degradation process is monitored by scanning electron microscopy (SEM) and fluorescence correlation spectroscopy (FCS). Moreover, siRNA release is analyzed by agarose gel electrophoresis and a fluorescent RNA detection assay. The results exemplify the versatility of the applied nanogel manufacturing process, which allows alternative stimuli‐responsive core cross‐linkers to be integrated for triggered oligonucleotide release as well as effective biodegradation for reduced nanotoxicity.