Highly porous magnetite/graphene nanocomposites for a solid-state electrochemiluminescence sensor on paper-based chips

Graphene-nanosheet-based highly porous magnetite nanocomposites (GN-HPMNs) have been prepared using a simple solvothermal method and used as an immobilization matrix for the fabrication of a solid-state electrochemiluminescence (ECL) sensor on paper-based chips. Highly porous Fe₃O₄ nanocrystal clusters were coated with acrylate and wrapped tightly on the skeleton of graphene nanosheets. The structures and sizes of the GN-HPMNs could be tuned by varying the proportions of the solvents ethylene glycol and diethylene glycol. Then, the relatively highly porous ones with an average diameter of about 65 nm were combined with Nafion to form composite films on an electrode surface for immobilization of Ru(bpy)₃ ²⁺ (bpy is 2,2′-bipyridine). Because of their porosity, negatively charged surface, and cooperative characteristics of magnetic nanomaterials and graphene, under an external magnetic field, the GN-HPMNs ensured effective immobilization, excellent electron transfer, and long-term stability of Ru(bpy)₃ ²⁺ in the composite film. The sensor developed exhibited excellent reproducibility with a relative standard deviation of 0.65 % for 30 continuous cycles. It was found to be much more favorable for detecting compounds containing tertiary amino groups and DNAs with guanine and adenine. A detection limit (signal-to-noise ratio of 3) of 5.0 nM was obtained for tripropylamine. As an application example, 0.5 nM single-nucleotide mismatch could be detected. This was the first attempt to introduce magnetic nanomaterials and an external magnetic field into paper-based chips. The sensor developed has the advantages of high sensitivity, good stability, and wide potential applicability as well as simplicity, low cost, and good disposability.

Determination of 48 fragrance allergens in toys using GC with ion trap MS/MS

This paper presents a method for the simultaneous determination of 48 fragrance allergens in four types of toys (plastic toys, play clays, plush toys, and paper toys) based on GC with ion trap MS/MS. Compared with single‐stage MS, MS/MS is superior in terms of the qualification and quantification of a large range of compounds in complicated matrices. Procedures for extraction and purification were optimized for each toy type. The method proved to be linear over a wide range of concentrations for all analytes with correlation coefficients between 0.9768 and 0.9999. Validation parameters, namely, LODs and LOQs, ranged from 0.005–5.0 and from 0.02–20 mg/kg, respectively. Average recoveries of target compounds (spiked at three concentration levels) were in the range of 79.5–109.1%. Intraday and interday repeatabilities of the proposed method varied from 0.7–10.5% and from 3.1–13.4%, respectively. The proposed method was used to monitor fragrance allergens in commercial toy products. Our findings indicate that this method is an accurate and effective technique for analyzing fragrance allergens in materials composed of complex components.     

Facile synthesis of a porous network-like silver film for electrocatalytic detection of nitrate

We have developed a method for in-situ construction of a porous network-like silver film on the surface of a glassy carbon electrode (GCE). It is based on a galvanic replacement reaction where a layer of copper nanoparticles is first electrodeposited as a sacrificial template. The silver film formed possesses a porous network-like structure and consists of an assembly of numerous nanoparticles with an average size of 200 nm. The electrode displays excellent electrocatalytic activity, good stability, and fast response (within 2 s) toward the reduction of nitrate at a working potential of −0.9 V. The catalytic currents linearly increase with the nitrate concentrations in the range of 0.08–6.52 mM, with a detection limit of 3.5 μM (S/N = 3) and a repeatability of 3.4 % (n = 5).

A facile method was developed for in situ construction of a porous network-like Ag film on a glassy carbon electrode by a galvanic replacement reaction, where a layer of Cu nanoparticles previously electrodeposited as a sacrificial template. Thus-formed Ag film displays excellent electrocatalytic activity, good stability, and fast response (within 2 s) toward nitrate reduction.

     

Regular arrays of triangular‐microstructure formed on silicon (111) surface via ultrafast laser irradiation in KOH solution

The regular micrometer‐scale triangular arrays were formed using ultrafast femtosecond laser irradiation on (111) surface of silicon wafer immersed in KOH solution (0.1 g/ml). At low laser fluence, the resulting surface is covered by triangular pits microstructures, whereas at high laser fluence, the structures are transformed to multilayer‐triangular stacks‐microstructures. The number of triangular stacks layer increased as the laser fluence increased. The formation of triangle microstructure arrays depends on both silicon surface crystallographic orientation and the concentration of KOH solution. Either for lower KOH solution concentration (0.02 g/ml) or other silicon crystallographic orientation, triangle arrays cannot be obtained. We attribute the formation of triangular microstructure arrays to the laser‐assisted chemical etching process. Copyright © 2013 John Wiley & Sons, Ltd.     

Cloning, Expression, and Characterization of β-mannanase from Bacillus subtilis MAFIC-S11 in Pichia pastoris

The β-mannanase gene (1,029 nucleotide) from Bacillus subtilis MAFIC-S11, encoding a polypeptide of 342 amino acids, was cloned and expressed in Pichia pastoris. To increase its expression, the β-mannanase gene was optimized for codon usage (mannS) and fused downstream to a sequence-encoding modified α-factor signal peptide. The expression level was improved by 2-fold. This recombinant enzyme (mannS) showed its highest activity of 24,600 U/mL after 144-h fermentation. The optimal temperature and pH of mannS were 50 °C and 6.0, respectively, and its specific activity was 3,706 U/mg. The kinetic parameters V _max and K _m were determined as 20,000 U/mg and 8 mg/mL, respectively, representing the highest ever expression level of β-mannanase reported in P. pastoris. In addition, the enzyme exhibited much higher binding activity to chitin, chitosan, Avicel, and mannan. The superior catalytic properties of mannS suggested great potential as an effective additive in animal feed industry.     

A facile one-pot, three-component synthesis of 3,3′-(4-arylpyridine-2,6-diyl)bis(2H-chromen-2-one) derivatives under microwave irradiation

A series of 3,3′-(4-arylpyridine-2,6-diyl)bis(2H-chromen-2-one) derivatives have been synthesized by the one-pot, three-component reaction of 3-acetylcoumarin, an aromatic aldehyde, and ammonium acetate in acetic acid under microwave irradiation. This procedure has the major advantages of short reaction time, good yields, low energy consumption, easy operation, and environmental friendliness. All of the products were characterized by IR and NMR spectroscopy, MS, and elemental analysis.     

A New Series of C‐6 Unsubstituted Tetrahydropyrimidines: Convenient One‐Pot Chemoselective Synthesis,Aggregation‐Induced and Size‐Independent Emission Characteristics

A new series of C‐6 unsubstituted tetrahydropyrimidines 6 have been directly synthesized via a convenient urea‐catalyzed chemoselective five‐component reaction (5CR) under mild conditions. Compounds 6 show typical aggregation‐induced emission enhancement (AIEE) characteristics because they are practically no emissive in solution but emit blue or green fluorescence in aggregates with fluorescence yield up to 93 %. One of the 5CR products, 6 aa , exhibits blue‐ and green‐fluorescence aggregates (bf‐ and gf‐aggregates). The bf‐ and gf‐aggregates are prepared under different conditions and proved to result from different J‐aggregations by single‐crystal X‐ray analysis. In addition, the bf‐ and gf‐aggregates of 6 aa show unusual size‐independent emission (SIE) characteristics because their maximum emission wavelengths in different sizes (suspension particles, film, powder and crystals) are the same, 434 and 484 nm, respectively. Based on the obtained experimental results, the 5CR mechanism, the origins of AIEE and SIE characteristics are discussed.     

Chinese regional energy efficiency change and its determinants analysis: Malmquist index and Tobit model

China becomes the largest energy consumer in 2010 but its energy productivity is well below the world average. To meet China’s fast growing energy using, energy efficiency should be especially emphasized under China’s energy policy. This paper focuses on the regional level of energy efficiency change in China. And we analyze total factor energy efficiency for 30 Chinese provinces over the period 1998–2009 using Malmquist index method and Tobit analysis. The Malmquist estimation results suggest there is a dropping change trend of energy productivity growth. Chinese energy efficiency still faces with huge regional disparity, but the energy technical efficiency reflects convergence in the nationwide and west region. As a result of Tobit regression, we find that industrial structure, energy consumption structure and institutional factor have different influences on energy efficiency.