Influence of the electric characteristics of II–VI semiconductor material on the electroluminescence of lanthanide complex

The organic-inorganic combined structural device (ITO/PVK:Eu/ZnS/Al) is fabricated based on layered optimization scheme. II–VI semiconductor material ZnS is acted as an electron function (transporting and acceleration) layer. The hot electrons which have been accelerated in the ZnS layer directly impact excitation europium ions through resonant energy transfer and then recombine with injected holes to form excitons in PVK or EuTTA₂(N-HPA)Phen. Europium (Eu) ions may also be excited by intramolecular energy transfer from ligands. There are two kinds of excitation mechanisms: impacted excitation and injected recombination for the combined structural device. The electroluminescence (EL) intensity of the combined structural device is strongly improved and reaches up to 381 cd/m² at 20 V compared with the pure organic structural device. It may be an effective method to improve the EL intensity of the lanthanide complex by using electric characteristics of inorganic semiconductor materials.     

DBSA-catalyzed hydrolysis of chain α-oxo ketene dithioacetals in water: Aqueous synthesis of β-ketothioesters

In this paper, we wish to report an environment friendly synthetic method for β-ketothioesters from a dodecylbenzenesulfonic acid (DBSA)-catalyzed hydrolysis reaction of chain α-oxo ketene dithioacetals in water. It was shown that the hydrolysis reaction of chain α-oxo ketene dithioacetals could efficiently occur in the presence of 7.5?mol% DBSA at 100?°C in water, affording the desired β-keto thioesters in excellent yields.     

Fabrication of Electrospun PVDF Nanofibers with Higher Content of Polar β Phase and Smaller Diameter by Adding a Small Amount of Dioctadecyl Dimethyl Ammonium Chloride

In this work,the effect of dioctadecyl dimethyl ammonium chloride(DDAC,a kind of alkyl ammonium salt) on polar β phase content and the diameter of electrospun PVDF nanofibers was investigated for the first time.Our experimental results show that the diameter of the electrospun PVDF nanofiber could be largely reduced and the content of polar β phase also become dominant immediately by just adding a little amount of DDAC.When the mass fraction of DDAC reached 4%,the content of polar β phase increased by about 39.1% compared with PVDF nanofibers without DDAC.Besides,the crystallinity of PVDF nanofibers also increased with the addition of DDAC.Based on the results,the possible mechanism of cooperative effect between electrospinning and DDAC on fiber diameter and formation of β phase in PVDF was discussed.     

Characterisation and effect of polymer network deformation in reverse-mode polymer-stabilised cholesteric texture

In reverse-mode polymer-stabilised cholesteric texture (PSCT), the dynamic response is derived from local director reorientation governed by dielectric coupling effect/self-assembly and polymer network deformation. A double exponential rise/decay model is proposed to investigate the underlying physical mechanisms. Through simulation of the transient rise and decay processes, the polymer network deformation in PSCT can be quantitatively evaluated. Less deformation and faster restoration speed of the polymer network can suppress hysteresis. These results provide useful guidelines for future PSCT fabrication and performance optimisation.     

溶胶-凝胶法制备纳米氮化钒的研究

氮化钒(VN)具有十分高的热、化学稳定性和强的机械性能,广泛用于切削工具、磨具和结构材料;也是一种良好的催化剂,具有高催化活性、高选择性、良好的稳定性和抗中毒性能.细粒度的VN能有效提高催化活性,改善结构材料的韧性[1].传统上VN应用NH4VO3在NH3气氛中氨解,需要在1100℃下加热12h,冷却并研磨物料,再氨解12h,仅能获得90%的微米级VN粉体[2].     

Enhanced reversible photoswitching of azobenzene-functionalized graphene oxide hybrids

An enhanced photoinduced reversible switching of graphene oxide-azobenzene (GO-AZO) hybrid was investigated as a highly sensitive photoswitch. The internal short-range ordered crystalline structure of GO-AZO hybrid was advantageous to charge transfer. The AZO moieties on GO underwent a rapid trans-cis photoisomerization upon ultraviolet irradiation due to the electron interaction between AZO and GO. The GO-AZO hybrid film showed an enhanced reversible photoswitching performance with high on/off ratio of 8 and fast response time less than 500 ms. The high sensitivity of GO-AZO switch arises from the intramolecular donor-acceptor architecture with efficient charge transfer.     

Investigation of the effects of 24 bio-matrices on the LC-MS/MS analysis of morinidazole

This study compares and evaluates the effect of various matrices on liquid chromatography (LC) coupled with tandem mass spectrometry (MS/MS) analysis. Permanent post-column infusion (PCI) was used to quantify matrix effects. In this way, the suppressed or enhanced signal of the target material resulting from different co-eluting matrix components could be assessed. Twenty-four biological samples from in vivo and in vitro experiments were selected for this study. In addition, 7 sample components were further analyzed after sample preparation by protein precipitation. Multiple regression analysis was used to investigate the collinear relationship between matrix effects and co-eluted components at different time intervals. We found that salt was the dominant factor which impacted changes in signal detection. In order to eliminate it, we used ammonium formate as a modifier of the mobile phase which resulted in charge-state redistribution profiles so that a homogeneous matrix formed. By employing pulse gradient chromatography in the presence of 5 mM ammonium formate, favorable improvements of enhanced signal intensity and reduced matrix effects were obtained. These experiments also indicated the feasibility of using analogue IS during bio-analysis which contributed to an overall faster assay that would be suitable for drug discovery and development purposes.     

Synthesis, structures and magnetic properties of n=3 Ruddlesden-Popper compounds Ca4Mn3−xTaxO10 (0≤x≤0.3)

The structural and magnetic properties of Ta-doped Ca₄Mn_3−xTa_xO₁₀ (0≤x≤0.3) compounds have been investigated. Structural refinement indicates that the Ta doping maintains the orthorhombic layered perovskite structure with space group Pbca as Ca₄Mn₃O₁₀ but induces an increase in both unit cell volume and octahedral distortion. The magnetization measurements reveal that the magnetization first increases and reaches to maximum for the x=0.1 sample and then gradually decreases with the increase of Ta content. There appear short-range ferromagnetic (FM) clusters in all the doped samples, which are caused by the double-exchange interaction between Mn⁴⁺ and Mn³⁺ that is induced by the charge compensation effect. As x is higher than 0.1, the overall results show evidence for the gradual appearance of a cluster glass behavior. When x increases to 0.3, the long-range antiferromagnetic (AFM) ground state is melted into the short-range magnetically ordered regions due to the increase of Ta⁵⁺ and Mn³⁺ at the expense of Mn⁴⁺. The competition between AFM regions and FM clusters makes the short-range magnetic components frustrate when the temperature falls to a frustrating point, and thus cluster glass transition occurs.     

High-Level Expression and Efficient Purification of Bioactive Swollenin in <Emphasis Type="Italic">Aspergillus oryzae</Emphasis>

The bioactivity of swollenin is beneficial to cellulose decomposition by cellulase despite the lack of hydrolytic activity itself. In order to improve the productivity of swollenin, the effects of culture conditions on the expression level in recombinant Aspergillus oryzae were investigated systematically. With regard to the bioactivity of swollenin, glycerin and peanut meal were the optimal carbon or nitrogen source, respectively. The highest level production of swollenin (50 mg L⁻¹) was attained after 88 h cultivation with the initial pH of 5.6 in the culture medium. Then the soluble swollenin was effectively purified from the cultural supernatant by ammonium sulfate precipitation and cationic exchange chromatography with recovery yield of 53.2%. The purified swollenin was fully bioactive due to its strong synergistic activity with cellulose.     

Biodiesel Preparation from Jatropha curcas Oil Catalyzed by Hydrotalcite Loaded With K2CO3

This paper discusses the synthesis of biodiesel catalyzed by solid base of K₂CO₃/HT using Jatropha curcas oil as feedstock. Mg–Al hydrotalcite was prepared using co-precipitation methods, in which the molar ratio of Mg to Al was 3:1. After calcined at 600 °C for 3 h, the Mg–Al hydrotalcite and K₂CO₃ were grinded and mixed according to certain mass ratios, in which some water was added. The mixture was dried at 65 °C, and after that it was calcined at 600 °C for 3 h. Then, this Mg–Al hydrotalcite loaded with potassium carbonate was obtained and used as catalyst in the experiments. Analyses of XRD and SEM characterizations for catalyst showed the metal oxides formed in the process of calcination brought about excellent catalysis effect. In order to achieve the optimal technical reaction condition, five impact factors were also investigated in the experiments, which were mass ratio, molar ratio, reaction temperature, catalyst amount and reaction time. Under the best condition, the biodiesel yield could reach up to 96%.