Desorption electrospray ionization mass spectrometry for the analysis of pharmaceuticals and metabolites

The performance of desorption electrospray ionization (DESI) in the analysis of a group of pharmaceuticals and their glucuronic acid conjugates is reported. The suitability of different sprayer solvents and different surfaces was examined. In the positive ion mode, water/methanol/trifluoroacetic acid performed best, whereas, in the negative ion mode, water/methanol/ammonium hydroxide was found to be the most suitable spray solvent. Of the surfaces investigated, polymethylmethacrylate (PMMA) was found to give the best performance in terms of sensitivity. Spray solution flow rate and the distance of the sprayer tip from the surface were also found to have significant effects on the signal intensity. Analytes with basic groups efficiently formed the corresponding protonated molecules in the positive ion mode, whereas acidic analytes, such as the glucuronic acid conjugates, formed intense signals due to the deprotonated molecules in the negative ion mode. Ionization of neutral compounds was less efficient and in many cases it was achieved through adduct formation with simple anions or cations.     

Novel water-soluble quaternary piperazine derivatives of chitosan: synthesis and characterization

Novel synthesis methods for the preparation of quaternary piperazine derivatives of chitosan were developed. Quaternary ammonium moiety can be selectively inserted into either one or both of the piperazine nitrogens, yielding structurally uniform chitosan derivative structures. Water-soluble end products were thoroughly characterized with FT-IR, 1H NMR, 13C NMR and 2D 1H-13C HSQC NMR. The molecular weights of the end products were determined by GPC with triple detection.     

Terbium(III) Chelate as an Efficient Donor for Multiple-Wavelength Fluorescent Acceptors

The emission spectra of the lanthanide chelates enable them to act as a donor for several acceptors emitting at different wavelengths. Fluorescence resonance energy transfer between terbium(III) chelate labeled antibody Fab fragment (donor) and a 17β-estradiol conjugated to Alexa Fluor 488, 555, 594 or 680 (acceptor) was employed to study the functionality of the terbium(III) chelate as an efficient donor for several acceptors emitting from green to far-red. During measurement, the sensitized emission of the acceptor was measured at acceptor specific wavelength. All the tested dyes proved to be efficient acceptors, and they were successfully used in the competitive homogeneous E2 assay. The highest signal to background ratio and the best assay performance was obtained with Alexa Fluor 680, due to the very low donor emission background at the far-red area. In addition, the sensitized emission of both Alexa Fluor 488 and 680 could be measured simultaneously without significant cross talk.     

Time-resolved coherent anti-Stokes Raman-scattering measurements of I2 in solid Kr: vibrational dephasing on the ground electronic state at 2.6-32 K

Time-resolved coherent anti-Stokes Raman-scattering (CARS) measurements are carried out for iodine (I2) in solid krypton matrices. The dependence of vibrational dephasing time on temperature and vibrational quantum number v is studied. The v dependence is approximately quadratic, while the temperature dependence of both vibrational dephasing and spectral shift, although weak, fits the exponential form characteristic of dephasing by pseudolocal phonons. The analysis of the data indicates that the frequency of the pseudolocal phonons is approximately 30 cm(-1). The longest dephasing times are observed for v = 2 being approximately 300 ps and limited by inhomogeneous broadening. An increase in the dephasing rate of v = 2 as the temperature is lowered to T = 2.6 K is taken as a clear indication of lattice-strain-induced inhomogeneity of the ensemble coherence.     

Charge Exchange Reaction in Dopant-Assisted Atmospheric Pressure Chemical Ionization and Atmospheric Pressure Photoionization

The efficiencies of charge exchange reaction in dopant-assisted atmospheric pressure chemical ionization (DA-APCI) and dopant-assisted atmospheric pressure photoionization (DA-APPI) mass spectrometry (MS) were compared by flow injection analysis. Fourteen individual compounds and a commercial mixture of 16 polycyclic aromatic hydrocarbons were chosen as model analytes to cover a wide range of polarities, gas-phase ionization energies, and proton affinities. Chlorobenzene was used as the dopant, and methanol/water (80/20) as the solvent. In both techniques, analytes formed the same ions (radical cations, protonated molecules, and/or fragments). However, in DA-APCI, the relative efficiency of charge exchange versus proton transfer was lower than in DA-APPI. This is suggested to be because in DA-APCI both dopant and solvent clusters can be ionized, and the formed reagent ions can react with the analytes via competing charge exchange and proton transfer reactions. In DA-APPI, on the other hand, the main reagents are dopant-derived radical cations, which favor ionization of analytes via charge exchange. The efficiency of charge exchange in both DA-APPI and DA-APCI was shown to depend heavily on the solvent flow rate, with best efficiency seen at lowest flow rates studied (0.05 and 0.1 mL/min). Both DA-APCI and DA-APPI showed the radical cation of chlorobenzene at 0.05–0.1 mL/min flow rate, but at increasing flow rate, the abundance of chlorobenzene M^+. decreased and reagent ion populations deriving from different gas-phase chemistry were recorded. The formation of these reagent ions explains the decreasing ionization efficiency and the differences in charge exchange between the techniques.

Open image in new window

Graphical Abstract ?

     

A neutral xenon-containing radical,HXeO

We report an open-shell species containing xenon, HXeO ((2)Sigma), prepared by UV photolysis of H(2)O/Xe or N(2)O/HBr/Xe solid mixtures at 7 K and subsequent thermal mobilization of oxygen atoms at >/=30 K. The H-Xe stretching absorption of HXeO in solid Xe is at 1466.1 cm(-1), and it shifts to 1070.3 cm(-1) upon deuteration. The extensive ab initio calculations indicate that HXeO is intrinsically stable, owing to significant ionic and covalent contributions to its bonding. The formation of HXeO ((2)Sigma) radicals in these experiments suggests extensive stabilization and thermal mobility of singlet ((1)D) oxygen atoms in solid Xe and holds promises for the stability of the HKrO and HArO species.     

Oxidation of crocein orange G by lignin peroxidase isoenzymes

The ligninolytic enzyme system ofPhanerochaete chrysosporiun is able to decolorize several recalcitrant dyes. Three lignin peroxidase isoenzymes, LiP 3.85, LiP 4.15, and LiP 4.65, were purified by preparative isoelectric focusing from the carbon-limited culture medium ofP. chrysosporium. Based on amino terminal sequences, the purified isoenzymes correspond to the isoenzymes H8, H6, and H2, respectively, from theN-limited culture. The purified isoenzymes were used for decolorization of an azo dye, Crocein Orange G (COG). According to the kinetic data obtained, the oxidation of COG by lignin peroxidase appeared to follow Michaelis-Menten kinetics. Kinetic parameters for each isoenzyme were determined. The inactivating effect of ascending H₂O₂ concentrations on COG oxidation is shown to be exponential within the used concentration range. The best degree of decolorization of 100 μM COG was obtained when the H₂O₂ concentration was 150 μM. This was also the lowest H₂O₂ concentration for maximal decolorization of 100 μM COG, regardless of the amount of lignin peroxidase used in the reaction.     

Pinosylvin Shifts Macrophage Polarization to Support Resolution of Inflammation

Pinosylvin is a natural stilbenoid found particularly in Scots pine. Stilbenoids are a group of phenolic compounds identified as protective agents against pathogens for many plants. Stilbenoids also possess health-promoting properties in humans; for instance, they are anti-inflammatory through their suppressing action on proinflammatory M1-type macrophage activation. Macrophages respond to environmental changes by polarizing towards proinflammatory M1 phenotype in infection and inflammatory diseases, or towards anti-inflammatory M2 phenotype, mediating resolution of inflammation and repair. In the present study, we investigated the effects of pinosylvin on M2-type macrophage activation, aiming to test the hypothesis that pinosylvin could polarize macrophages from M1 to M2 phenotype to support resolution of inflammation. We used lipopolysaccharide (LPS) to induce M1 phenotype and interleukin-4 (IL-4) to induce M2 phenotype in J774 murine and U937 human macrophages, and we measured expression of M1 and M2-markers. Interestingly, along with inhibiting the expression of M1-type markers, pinosylvin had an enhancing effect on the M2-type activation, shown as an increased expression of arginase-1 (Arg-1) and mannose receptor C type 1 (MRC1) in murine macrophages, and C-C motif chemokine ligands 17 and 26 (CCL17 and CCL26) in human macrophages. In IL-4-treated macrophages, pinosylvin enhanced PPAR-γ expression but had no effect on STAT6 phosphorylation. The results show, for the first time, that pinosylvin shifts macrophage polarization from the pro-inflammatory M1 phenotype towards M2 phenotype, supporting resolution of inflammation and repair.     

Atomic layer deposition as pore diameter adjustment tool for nanoporous aluminum oxide injection molding masks

The wetting properties of polypropylene (PP) surfaces were modified by adjusting the dimensions of the surface nanostructure. The nanostructures were generated by injection molding with nanoporous anodized aluminum oxide (AAO) as the mold insert. Atomic layer deposition (ALD) of molybdenum nitride film was used to control the pore diameters of the AAO inserts. The original 50-nm pore diameter of AAO was adjusted by depositing films of thickness 5, 10, and 15 nm on AAO. Bis(tert-butylimido)-bis(dimethylamido)molybdenum and ammonia were used as precursors in deposition. The resulting pore diameters in the nitride-coated AAO inserts were 40, 30, and 20 nm, respectively. Injection molding of PP was conducted with the coated inserts, as well as with the non-coated insert. Besides the pore diameter, the injection mold temperature was varied with temperatures of 50, 70, and 90 degrees C tested. Water contact angles of PP casts were measured and compared with theoretical contact angles calculated from Wenzel and Cassie-Baxter theories. The highest contact angle, 140 degrees , was observed for PP molded with the AAO mold insert with 30-nm pore diameter. The Cassie-Baxter theory showed better fit than the Wenzel theory to the experimental values. With the optimal AAO mask, the nanofeatures in the molded PP pieces were 100 nm high. In explanation of this finding, it is suggested that some sticking and stretching of the nanofeatures occurs during the molding. Increase in the mold temperature increased the contact angle.     

Direct analysis of illicit drugs by desorption atmospheric pressure photoionization

The feasibility of desorption atmospheric pressure photoionization (DAPPI) in the direct analysis of illicit drugs was demonstrated by the analysis of confiscated drug samples of various forms such as tablets, blotter paper, and plant resin and bloom. 3,4-Methylenedioxymethamphetamine (MDMA), amphetamine, phenazepam, and buprenorphine were detected from the analyzed tablets, lysergic acid diethylamide (LSD) and bromobenzodifuranylisopropylamine (bromo-Dragonfly, ABDF) from blotter paper, and Delta(9)-tetrahydrocannabinol (THC) and cannabinol from Cannabis Sativa bloom and resin. The amphetamines, phenazepam and ABDF showed protonated molecules independent of the solvent used, whereas buprenorphine, LSD and the cannabinoids showed molecular ions with toluene and protonated molecules with acetone as the solvent.