Chemische Vitamin D<Subscript>3</Subscript>-Bestimmung in Lebertran

The different aspects of Vitamin D₃ determination and the data reported in the literature are discussed. The spectrophotometric determination of Vitamin D₃ in cod-liver oil is carried out after the alkaline saponification, extraction of unsaponified parts, precipitation of accompanying sterols and the column- and thin-layer chromatographic purification and separation of vitamin D₃ on 40 cm plates from other vitamins. The dyestuff α-naphtholbenzein is suited well as standard substance for the better location and identification of vitamin D₃ zone on the thin-layer plate. The results obtained from the chemical method were checked through the simultaneous biological determination.     

Inclusion-dependent mechanism of modification of cyclodextrins with heterocycles

Mono(6-deoxy-dimethylpyridinium)-β-cyclodextrins have been synthesized in reaction of mono (p-toluenesulfonyl) derivative of β cyclodextrin with the appropriate lutidine under microwave irradiation and conventional conditions. The results indicate that the mechanism consists of inclusion complex formation.     

Analysis of urban dust (PM<Subscript>2</Subscript>/PM<Subscript>10-2</Subscript>) in Daejeon city by instrumental neutron activation analysis

Summary As part of an air pollution monitoring study, airborne particulate matter (PM₂/PM_10-2) samples were collected from 2000 to 2003 at two sampling sites in an urban region, Daejeon, the middle of Korea. Mass concentrations of both fine and coarse fractions and that of the black carbon in the fine particles were measured using the Gent stacked filter unit sampler and the smoke stain reflectometer, respectively. In the collected samples the concentrations of 24 elements were analyzed using instrumental neutron activation analysis. Monitored data were investigated for their temporal trends under different environmental conditions and their seasonal correlation patterns. Crustal enrichment factors were also estimated to establish the contribution between anthropogenic and crustal origin. Patterns for airborne particle matter (APM) and elemental concentrations, seasonal variation of some marker elements were investigated. The results can be applied for the investigation of further air pollution sources and for the evaluation of air quality.     

Some Comments on the Matter Wave-light Wave Hypothesis

From the de Broglie matter wave hypothesis and Planck’s energy quantization law, and assuming conservation of energy in the absorption of a photon and its consequent conversion to kinetic energy of motion by a material particle initially at rest, one can deduce a simple mathematical relationship between the wavelength λ (or frequency ν), of the photon absorbed by the particle at rest, and the resulting de Broglie matter wave length, λ_D, of the particle with kinetic energy of motion of mv²/2. The relationship so deduced, λ_D∝√λ, suggests that visible wavelengths of light, from about 4000 ?, in the violet, to beyond about 7000 ?, in the red, on absorption by an electron at rest, lead to material electron wavelengths, λ_D, of the order of the size of the electron transfer proteins seen in the photosynthetic reaction centers of photosynthesizing organisms, at about a size of 50–100 ?. In addition to understanding the mechanism of photosynthesis as a material wave mediated phenomenon, further areas of importance of the relations pointed out in this paper are in the design of experiments to gain a deeper understanding of the basic tenets of wave mechanics, and in the use of tunable lasers to probe various properties of material waves, and to precisely control their properties for applications including lithography.     

Mechanism of inactivation of inducible nitric oxide synthase by amidines. Irreversible enzyme inactivation without inactivator modification

Nitric oxide synthases (NOS) are hemoproteins that catalyze the reaction of L-arginine to L-citrulline and nitric oxide. N-(3-(Aminomethyl)benzyl)acetamidine (1400W) was reported to be a slow, tight-binding, and highly selective inhibitor of iNOS in vitro and in vivo. Previous mechanistic studies reported that 1400W was recovered quantitatively after iNOS fully lost its activity and modification to iNOS was not detected. Here, it is shown that 1400W is a time-, concentration-, and NADPH-dependent irreversible inactivator of iNOS. HPLC-electrospray mass spectrometric analysis of the incubation mixture of iNOS with 1400W shows both loss of heme cofactor and formation of biliverdin, as was previously observed for iNOS inactivation by another amidine-containing compound, N5-(1-iminoethyl)-L-ornithine (L-NIO). The amount of biliverdin produced corresponds to the amount of heme lost by 1400W inactivation of iNOS. A convenient MS/MS-HPLC methodology was developed to identify the trace amount of biliverdin produced by inactivation of iNOS with either 1400W or L-NIO to be biliverdin IXalpha out of the four possible regioisomers. Two mechanisms were previously proposed for iNOS inactivation by L-NIO: (1) uncoupling of the heme peroxide intermediate, leading to destruction of the heme to biliverdin; (2) abstraction of a hydrogen atom from the amidine methyl group followed by attachment to the heme cofactor, which causes the enzyme to catalyze the heme oxygenase reaction. The second mechanistic proposal was ruled out by inactivation of iNOS with d3-1400W, which produced no d2-1400W. Detection of carbon monoxide as one of the heme-degradation products further excludes the covalent heme adduct mechanism. On the basis of these results, a third mechanism is proposed in which the amidine inactivators of iNOS bind as does substrate L-arginine, but because of the amidine methyl group, the heme peroxy intermediate cannot be protonated, thereby preventing its conversion to the heme oxo intermediate. This leads to a change in the enzyme mechanism to one that resembles that of heme oxygenase, an enzyme known to convert heme to biliverdin IXalpha. This appears to be the first example of a compound that causes irreversible inactivation of an enzyme without itself becoming modified in any way.     

Mass spectrometric study to characterize thioisoindole derivatives of aminoglycoside antibiotics

Aminoglycoside antibiotics are widely used to treat serious Gram-negative and Gram-positive bacterial infections. The lack of a UV chromophore presents a problem in the analysis of aminoglycosides. Derivatization with 1,2-phthalic dicarboxaldehyde (OPA) in the presence of a thiol made it possible to introduce a UV chromophoric thioisoindole moiety. A qualitative mass spectrometry study was carried out to confirm the molecular identity of the products formed. The conditions described earlier to derivatize gentamicin and kanamycin yielded products in which all primary amino groups are fully derivatized. On the other hand, with tobramycin and amikacin, there was also formation of incompletely derivatized products that contained one thioisoindole group less than the fully derivatized product. This study has therefore brought an additional insight into the nature of the OPA-aminoglycoside derivatives studied.     

Thermal and mechanical properties of PE/organoclay nanocomposites

Polyethylene/montmorillonite clay nanocomposites were obtained via direct melt intercalation. The clay was organically modified with four different types of quaternary ammonium salts. The objective of this work is to study the use of montmorillonite clay in the production of nanocomposites by means on rheological, mechanical and crystallization properties of nanocomposites and to compare to the properties of the matrix and PE/unmodified clay nanocomposites. In general, the tensile test showed that the yield strength and modulus of the nanocomposites are close to the pure PE. Apparently, the mixture with Dodigen salt seems to be more stable than the pure PE and PE/unmodified clay.     

Density Functional Theory and Low-Temperature Matrix Investigations of CO-Loss Photochemistry from [(C<Subscript>5</Subscript>R<Subscript>5</Subscript>)Ru(CO)<Subscript>2</Subscript>]<Subscript>2</Subscript> (R = H,Me) Complexes

The photochemical CO-loss products of the diruthenium complexes [CpRu(CO) ₂]₂ (5; Cp = ⁵-C₅H₅), [Cp*Ru(CO)₂]₂ (5*; Cp* = ⁵-C₅(CH₃)₅) and CpCp*[Ru(CO)₂]₂ (5) have been studied experimentally in low-temperature (96 K) matrices in 3-methylpentane by using IR spectroscopy. It is proposed that all three complexes undergo single-CO-loss chemistry but that the products have different structures. The single-CO-loss product from 5 is proposed to have one bridging and two terminal carbonyl ligands, whereas 5* and 5 generate triply bridged CO-loss products similar to that observed from [CpFe(CO)₂]₂ and [Cp*Fe(CO)₂]₂. Double-CO-loss from 5* and 5* 9 is also apparently observed. Relativistic DFT calculations have been carried out on various isomers of the starting materials and on potential CO-loss products from 5. The calculations suggest that the triply bridged product Cp₂Ru₂(-CO)₃ (6) might have a singlet ground state in contrast to the corresponding diiron complex Cp₂Fe₂(-CO)₃ (3), which has a triplet ground state.     

Mechanism and control of molecular energy flow: a modeling perspective

 Vibrational energy flow in organic molecules occurs by a multiple-time-scale mechanism that can be modeled by a single exponential only in its initial stages. The mechanism is a consequence of the hierarchical structure of the vibrational Hamiltonian, which leads to diffusion of vibrational wavepackets on a manifold with far fewer than the 3N−6 dimensions of the full vibrational state space. The dynamics are controlled by a local density of states, which does not keep increasing with molecular size. In addition, the number of vibrational coordinates severely perturbed during chemical reaction is small, leading to preservation of the hierarchical structure at chemically interesting energies. This regularity opens up the possibility of controlling chemical reactions by controlling the vibrational energy flow. Computationally, laser control of intramolecular vibrational energy redistribution can be modeled by quantum-classical, or by purely quantum-mechanical models of the molecule and control field. Received: 26 July 2002 / Accepted: 30 September 2002 / Published online: 2 December 2002 Electronic Supplementary Material to this paper can be obtained by using the Springer Link server located at http://dx.doi.org/10.1007/s00214-002-0394-2. Acknowledgements. This work was supported by NSF grant CHE 9986670. Correspondence to: M. Gruebele e-mail: gruebele@scs.uiuc.edu     

Liquid-liquid phase equilibria for some polystyrene-methylcyclohexane mixtures

Liquid-liquid cloud point diagrams of solutions of nearly monodisperse samples of polystyrene (PS), and binary mixtures of nearly monodisperse PS’s, both in methylcyclohexane (MCH), were determined for several polymer molecular weights (M_w) at 0.1 MPa. The bimodal mixtures (PS[M_w(1),ρ(1)] + PS[M_w(2),ρ(2)], M_w(1)=90×10³ g/mol, M_w(2)=13×10³ g/mol, 5.78 × 10³ g/mol, and 2.2 × 10³ g/mol, ρ=1.06) were prepared constraining 〈M_w〉=38.6×10³ g/mol, ρ=M_w/M_n is the polydispersity index. In each case the cloud point curves (CPC’s) for the bimodal mixtures are strongly skewed, lying well above CPC for 〈M_w〉 when φ<φ_CRITICAL, and below CPC for 〈M_w〉 when φ>φ_CRITICAL; φ is volume fraction polymer in the polymer/solvent mixture. The experimental results are discussed in the context of empirical and mean-field representations.