基于分形动力学过程的腐蚀预测模型

腐蚀是一种复杂随机现象,可以用分形理论更好地描述。本文根据分形动力学过程,以一组基于不同表面条件下的腐蚀发生概率为参数,建立计算机模型来预测大气、土壤环境的金属腐蚀过程。计算结果和实际腐蚀特征吻合一致。此外,本文还讨论了幂函数腐蚀模型中指数n和各种腐蚀概率之间的定量关系,揭示了腐蚀发展规律。     

1,1′‐Diethyl‐4,4′‐bipyridine‐1,1′‐diium bis(1,1,3,3‐tetracyano‐2‐ethoxypropenide): multiple C—H...N hydrogen bonds form a complex sheet structure

In the title salt, C₁₄H₁₈N₂²⁺·2C₉H₅N₄O⁻, the 1,1′‐diethyl‐4,4′‐bipyridine‐1,1′‐diium dication lies across a centre of inversion in the space group P2₁/c. In the 1,1,3,3‐tetracyano‐2‐ethoxypropenide anion, the two independent –C(CN)₂ units are rotated, in conrotatory fashion, out of the plane of the central propenide unit, making dihedral angles with the central unit of 16.0 (2) and 23.0 (2)°. The ionic components are linked by C—H...N hydrogen bonds to form a complex sheet structure, within which each cation acts as a sixfold donor of hydrogen bonds and each anion acts as a threefold acceptor of hydrogen bonds.     

Swelling behavior of polyethylenimine-cobalt complex in water

Polyethylenimine (PEI) was cross-linked by polyepichlorohydrin (PECH) and the swelling behavior of cross-linked PEI-Co complex membranes in water was studied. The equilibrium swelling ratio of PEI-Co complex membranes is lower and the swelling rate is slower than that of cross-linked PEI membranes without cobalt ion complexation. Both the equilibrium swelling ratio and swelling rate of PEI-Co complex membranes increase with increasing the molar ratio of PEI to PECH. The equilibrium swelling ratio of PEI-Co complex membranes remains almost constant with the change of the membrane thickness or temperature. The diffusion mechanism of water through PEI-Co complex membranes was also discussed, and it is found that the diffusion of water primarily obeys Fickian’s law, and the activation energy of diffusion is calculated to be 40.4 kJ/mol.     

Development and characterization of an all-solid-state potentiometric biosensor array microfluidic device for multiple ion analysis

A microfluidic device with an all-solid-state potentiometric biosensor array was developed using microfabrication technology. The sensor array included a pH indicator, and potassium and calcium ion-selective microelectrodes. The pH indicator was an iridium oxide thin film modified platinum microelectrode and the iridium oxide was deposited by an electrochemical method. The potassium and calcium ion-selective microelectrodes were platinum coated with silicon rubber based ion-selective membranes with respectively potassium (valinomycin) and calcium (ETH 1001) ionophores. The detection system was integrated with a micro-pneumatic pump which can continuously drive fluids into the microchannel through sensors at flow rates ranging from 52.4 microl min(-1) to 7.67 microl min(-1). The sensor array microfluidic device showed near-Nernstian responses with slopes of 62.62 mV +/- 2.5 mV pH(-1), 53.76 mV +/- 3 mV -log[K+](-1) and 25.77 mV +/- 2 mV -log[Ca2+](-1) at 25 degrees C +/- 5 degrees C, and a linear response within the pH range of 2-10, with potassium and calcium concentrations between 0.1 M and 10(-6) M. In this study the device provided a convenient way to measure the concentration of hydrogen, potassium and calcium ions, which are important physiological parameters.     

Synthesis of tetracycline analogs and their bone affinities

Tetracycline analogs were designed and synthesized and their bone affinities were tested on hydroxyapatite. The results showed that the carbonyl-amide-enol structure in A ring and phenol-ketone structure in BCD ring may be responsible for tetracycline＇s high bone affinity and either A ring or BCD ring has a planar conformation is essential. 2007 Ling Ling Weng. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.     

协萃络合物结构的研究——二(1-苯基 -3-甲基-4-三氟乙酰基吡唑啉酮-5)-(1，10菲啰啉)合钴(II)的合成、表征与晶体结构的测定

合成了二(1-苯基-3-甲基-4-三氟乙酰基吡唑啉酮-5)-(1,10菲啰啉)合钴(Ⅱ)混合配体络合物单晶, 由元素分析确定其组成为Co(C_(12)H_3F_3O_2N_2)_2·(C_(12)H_8N_2)。通过溶解性、摩尔电导, 磁性、中红外光谱、远红外光谱、差热、热重分析研究了该化合物的有关性质。用四园单晶衍射仪, 测定了该络合物的分子及晶体结构。晶体属单斜晶系, P2_(l/o)空间群,晶胞参数为:a=1.0422(3) nm, b=1.6462(2) nm, c=2.0678(3) nm, β=75.86(1)°, V=3.4402(1.6) nm, Z=4, F(000)=1580, d_(calc)=1.50 g cm~(-3), d_(exp.)=1.492g cm~(-3)。经最小二乘法修正后, 最终偏差因子R=0.0716。配合物中钴的配位数为六, 分子中有四个氧来自两个双齿配体PMTFP, 两个氮原子由phen所提供。     

CuO/CeO2-ZrO2/SiC整体催化剂催化甲醇水蒸气重整制氢的研究

采用溶胶凝胶法制备了CeO2-ZrO2固溶体载体涂层,再经浸渍法制备了高空速下性能较好的甲醇水蒸气重整制氢xCuO/CeO2-ZrO2/SiC整体催化剂.采用X射线衍射(XRD)、比表面积测试(BET)、H2程序升温还原(H2-TPR)和X射线光电子能谱(XPS)等手段对催化剂进行了表征,结果表明,催化剂活性主要与Cu...     

钙钛矿型稀土氧化物的合成及其能源转化储存应用研究进展

钙钛矿型稀土氧化物价格低廉、结构可控、性质多样,在催化领域有着广阔的应用前景。本文从钙钛矿型稀土氧化物的结构类型、合成方法及电化学催化反应出发,总结了传统高温合成方法、火焰喷雾法、静电纺丝法和脉冲激光沉积法等几种最常用的合成方法,以及提升其氧析出反应(OER),氢析出反应(HER)和氧还原反应(ORR)催化能力的典型有效方法,概述了近年来钙钛矿型稀土氧化物在电解水、金属空气电池和固体氧化物燃料电池等能源转化储存装置的主要研究进展,进而对钙钛矿型稀土氧化物在能源转化储存领域的应用进行了展望。     

Enhancing the Crystallization Performance of Poly(L-lactide) by Intramolecular Hybridizing with Tunable Self-assembly-type Oxalamide Segments

In this work, hydroxyl-terminated oxalamide compounds N~1,N~2-bis(2-hydroxyethyl)oxalamide(OXA1) and N~1,N~(1′)-(ethane-1,2-diyl)bis(N2-(2-hydroxyethyl)oxalamide(OXA2) were synthesized to initiate the ring-opening polymerization of L-lactide for preparation of oxalamide-hybridized poly(L-lactide)(PLA_(OXA)), i.e., PLA_(OXA1) and PLA_(OXA2). The crystallization properties of PLA were improved by the self-assembly of the oxalamide segments in PLA_(OXA) which served as the initial heterogeneous nuclei. The crystal growth kinetics was studied by HoffmanLauritzen theory and it revealed that the nucleation energy barrier of PLA_(OXA1) and PLA_(OXA2) was lower than that of PLA. Consequently, PLA_(OXA) could crystallize much faster than PLA, accompanied with a decrease in spherulite size and half-life crystallization time by 74.8% and 86.5%(T=125 ℃), respectively. In addition, the final crystallinity of PLA_(OXA1) and PLA_(OXA2) was 6 and 8 times higher, respectively, in comparison with that of neat PLA under a controlled cooling rate of 10 ℃/min. The results demonstrate that the hybridization of oxalamide segments in PLA backbone will serve as the self-heteronucleation for promoting the crystallization rate. The higher the content of oxalamide segments(PLA_(OXA2) compared with PLA_(OXA1)) is, the stronger the promotion effect will be. Therefore, this study may provide a universal approach by hybridizing macromolecular structure to facilitate the crystallization of semi-crystalline polymer materials.     

Construction of Two Stable Co(II)-Based Hydrogen-Bonded Organic Frameworks as a Luminescent Probe for Recognition of Fe3+ and Cr2O72− in H2O

A pair of cobalt(II)-based hydrogen-bonded organic frameworks (HOFs), [Co(pca)₂(bmimb)]_n (1) and [Co₂(pca)₄(bimb)₂] (2), where Hpca = p-chlorobenzoic acid, bmimb = 1,3-bis((2-methylimidazol-1-yl)methyl)benzene, and bimb = 1,4-bis(imidazol-1-ylmethyl)benzene were hydrothermally synthesized and characterized through infrared spectroscopy (IR), elemental and thermal analysis (EA), power X-ray diffraction (PXRD), and single-crystal X-ray diffraction (SCXRD) analyses. X-ray diffraction structural analysis revealed that 1 has a one-dimensional (1D) infinite chain network through the deprotonated pca⁻ monodentate chelation and with a μ₂-bmimb bridge Co(II) atom, and 2 is a binuclear Co(II) complex construction with a pair of symmetry-related pca⁻ and bimb ligands. For both 1 and 2, each cobalt atom has four coordinated twisted tetrahedral configurations with a N₂O₂ donor set. Then, 1 and 2 are further extended into three-dimensional (3D) or two-dimensional (2D) hydrogen-bonded organic frameworks through C–H···Cl interactions. Topologically, HOFs 1 and 2 can be simplified as a 4-connected qtz topology with a Schläfli symbol {6⁴·8²} and a 4-connected sql topology with a Schläfli symbol {4⁴·6²}, respectively. The fluorescent sensing application of 1 was investigated; 1 exhibits high sensitivity recognition for Fe³⁺ (K_sv: 10970 M⁻¹ and detection limit: 19 μM) and Cr₂O₇²⁻ (K_sv: 12960 M⁻¹ and detection limit: 20 μM). This work provides a feasible detection platform of HOFs for highly sensitive discrimination of Fe³⁺ and Cr₂O₇²⁻ in aqueous media.