中、远红外双波段激光器发射光谱测量与评估

在分析中远红外双波段(氟化氘与一氧化碳)激光器发射光谱的基本特征和分光型谱仪存在高级次光谱混叠等问题的基础上,选定Tensor37干涉型遥测光谱仪并利用黑体标定出仪器响应函数;对中、远红外双波段激光器光谱进行了模拟测量和实际测量,分析评估了双波段激光器的谱线成分、峰值变化、测量精度和相对强度等,为双波段激光器的介质参数计算、运转参数优化以及红外应用提供有效数据。     

基于小波变换的体内外酒精含量近红外光谱检测与分析

应用小波分析对体外和体内的酒精近红外光谱信号进行去噪分析,通过体外光谱分析确定酒精吸收峰特征范围,为体内近红外光谱分析确定有效区间。软阈值和硬阈值下,分别采用缺省阈值、Birge-Massart阈值和最大最小值阈值,比较酒精光谱去噪,信噪比(signal noise ratio,SNR)和均方根误差(root mean square error,RMSE)去噪效果。结果表明:缺省硬阈值方法对酒精近红外光谱去噪的效果较好;小波变换可以有效去除酒精近红外光谱的噪声,提高信噪比,保留有用真实信号。在不同的酒精浓度下,去噪后的近红外光谱能够较好的显示浓度变化规律。小波分析在近红外光谱法对人体酒精无创检测及定量分析方面有较好的应用前景。     

The magnetic entropy change in the double perovskite La2NiMnO6 with strong spin–phonon coupling

The magnetocaloric effect and the critical behavior of La₂NiMnO₆ are investigated by measurement of the magnetization around $T_C$. The magnetic entropy change $\left|\Delta S\right|$ of La₂NiMnO₆ for a field change of 0–45 kOe near the Curie temperature is about 5% of the theoretical expectation. The critical behavior of the La₂NiMnO₆ deviates from the mean field theory. These abnormal phenomena are understood in the context of the strong spin–phonon coupling in La₂NiMnO₆. It is suggested that a method of modulating this coupling would enhance the magnetic entropy change greatly, which makes the La₂NiMnO₆ a promising candidate for room-temperature magnetic refrigeration.     

Energy transfer under impact load studied by molecular dynamics simulation

The process of amorphous silica clusters impact on a crystal silicon substrate is studied by molecular dynamics simulation, focusing on the energy transfer between clusters and the substrate under different impact conditions such as cluster size, impact velocity, and incidence angle. The impact process is divided into cluster deformation stage, cluster resilience stage, and cluster rebound stage according to the courses of energy change during the impact process. The simulation elucidates that the time of impact process of every cluster is only related to cluster size and is independent of impact velocity and incidence angle. The translational energy loss of the cluster and the potential energy increment of the substrate during cluster deformation stage, and the dissipation energy of system are independent of cluster size under the same impact energy and incidence angle. And the translational energy loss of the cluster during cluster rebound stage changes from energy absorption to energy release after the incidence angle becomes more than 60°. The rotational energy of the cluster may be omitted when the incidence angle is less than 15°. The ratios of the rotational energy increment of the cluster, the kinetic energy increment, and the potential energy increment of the substrate to the translational energy loss of the cluster are obviously influenced by impact conditions. And the ratios of the increment of the other categories of energy to the translational energy loss of the cluster are not sensitive to impact conditions.     

Generation of minimally persistent circle formation for a multi-agent system

In this paper, two methods of generating minimally persistent circle formation are presented. The proposed methods adopt a leader-follower strategy and all followers are firstly motivated to move into the leader＇s interaction range. Based on the information about relative angle and relative distance, two numbering schemes are proposed to generate minimally persistent circle formation. Distributed control laws are also designed to maintain the desired relative distance between agents. The distinctive features of the proposed methods are as follows. First, only 2n - 3 unilateral communication links for n agents are needed during the circle formation process and thus the communication complexity can be reduced. In addition, the formation topology is kept fixed for the whole motion and achieves a self-stability property. Finally, each follower keeps a regualr interval with its neighbors and the formation converges to a uniform circle formation. Simulation results are also provided to demonstrate the effectiveness of the proposed methods.     

Tuning giant magnetoimpedance response of Fe75.5Si13.5B7Nb3Cu1 amorphous ribbon by laser ablation

An easy method of tuning the response of maximum magnetoimpedance (MI) ratio in Fe_75.5Si_13.5B₇Nb₃Cu₁ amorphous ribbons was investigated by laser ablation. In order to obtain different GMI peak positions, the stripes were ablated by laser with different separations on the surface layer of the ribbon. When the stripes were parallel (or perpendicular) to the applied magnetic field, the peak location of maximum MI ratio would drift to larger (or smaller) external field. And the shift was correlated with the spaces between stripes. The applied fields corresponding to the minimum and maximum values of peak location are 13 Oe and 49 Oe at the frequency of 15 MHz, respectively. The phenomenon can be explained by the anisotropy field induced by demagnetizing field after the laser ablation.     

Measurement of absolute phase Shift on reflection of thin films using white-light spectral interferometry

A novel method to measure the absolute phase shift on reflection of thin film is presented utilizing a white-light interferometer in spectral domain. By applying Fourier transformation to the recorded spectral interference signal, we retrieve the spectral phase function Ф, which is induced by three parts： the path length difference in air L, the effective thickness of slightly dispersive cube beam splitter Teff and the nonlinear phase function due to multi-reflection of the thin film structure. We utilize the fact that the overall optical path difference （OPD） is linearly dependent on the refractive index of the beam splitter to determine both L and Teff. The spectral phase shift on reflection of thin film structure can be obtained by subtracting these two parts from Ф. We show theoretically and experimentally that our new method can provide a simple and fast solution in calculating the absolute spectral phase function of optical thin films, while still maintaining high accuracy.     

由单负材料组成的一维对称型光子晶体中的隧穿模

由电单负材料A和磁单负材料B构成了一维对称型光子晶体,数值计算表明其带隙中出现了一隧穿模. 材料层数增加,隧穿模宽度急剧变窄,而其位置不变.隧穿模的位置和宽度对入射角的变化都不太敏感. 材料的几何厚度减小,隧穿模的位置蓝移,而其宽度不变. μ_A, ε_B增加,隧穿模的位置红移,宽度减小. 利用隧穿模的以上特性可以实现对电磁波传播的动态调控.     

Phase Sensitivity in Yurke-Like State

We investigate we investigate the quantum Fisher information and phase sensitivity in Yurke-like state superposed by two special multi-particle states and a symmetric state with relative phase. By studying the influences of superposition coefficients and relative phase on the maximal quantum Fisher information and phase sensitivity, we reveal some entanglement properties of Yurke-like state.     

Atomic structure of highly strained BiFeO3 thin films

We determine the atomic structure of the pseudotetragonal T phase and the pseudorhombohedral R phase in highly strained multiferroic BiFeO(3) thin films by using a combination of atomic-resolution scanning transmission electron microscopy and electron energy-loss spectroscopy. The coordination of the Fe atoms and their displacement relative to the O and Bi positions are assessed by direct imaging. These observations allow us to interpret the electronic structure data derived from electron energy-loss spectroscopy and provide evidence for the giant spontaneous polarization in strained BiFeO(3) thin films.