锂离子电池用α-Fe2O3-Ag复合纳米棒负极材料的制备及储锂性能

采用FeOOH纳米棒为前驱体,通过层层自组装法及随后的热处理过程制备出α-Fe2O3-Ag复合纳米棒.采用透射电子显微镜(TEM)、高分辨透射电子显微镜(HRTEM)和电化学性能测试对样品的形貌、结构及电化学性能进行了表征.结果表明,Ag纳米颗粒均匀地分布在α-Fe2O3纳米棒的表面.作为锂离子电池负极材料,α-Fe2O3-Ag复合纳米棒表现出了较好的循环性能和较高的比容量.180个循环后,其比容量高达549.8 mA.h/g.     

蒸汽活化生物质焦吸附模拟烟气中SO2和NO的研究

以麦秆和稻壳生物质为研究对象,在不同的热解温度、热解速率以及蒸汽活化温度条件下制备了生物质焦,采用比表面积与孔隙度分析仪测定生物质焦的比表面积和孔隙结构参数。利用固定床吸附装置,研究了热解温度、热解速率、活化温度和模拟烟气中SO₂和NO浓度等因素对生物质焦吸附SO₂和NO性能的影响。结果表明,蒸汽活化可以显著提高生物质焦的BET比表面积、D-R比表面积、D-R微孔容积和总孔容,降低其平均孔径,并显著增加蒸汽活化生物质焦对SO₂与NO吸附的起始穿透时间和吸附量。快速热解下制得的蒸汽活化焦对SO₂和NO的吸附效果优于慢速热解,热解温度为873 K的蒸汽活化焦的吸附性能明显好于热解温度为673与1 073 K的蒸汽活化焦。在973~1 173 K下,随着蒸汽活化温度的提高,蒸汽活化生物质焦对SO₂和NO的吸附量呈现先上升后下降的趋势。随着模拟烟气中SO₂与NO浓度的降低,蒸汽活化生物质焦对SO₂与NO吸附的起始穿透时间延长,但相应的SO₂和NO吸附量下降。在873 K、快速热解和1 073 K条件下制得的蒸汽活化麦秆焦对SO₂和NO吸附量最大,其值分别为109.02和21.77 mg/g。     

在线质谱仪检测植物排放的挥发性有机物

利用在线检测质谱仪(SPIMS-1000)分别对高温烘烤、长时间密封保存、机械损伤等处理过的松科松属马尾松(Pinus Massoniana L.)样品排放的挥发性有机物(VOCs)与新鲜样品进行对比检测。SPIMS-1000在线检测质谱仪能够检测出植物排放的异戊二烯(m/z 68)和单萜(m/z 136),及其它一些特异性组分,如(Z)-3-己烯醛(m/z 98)等。利用在线检测质谱仪实现敞开环境中原位植物排放气体的检测。实验表明,在线检测质谱仪被广泛应用于环境中VOCs的实时、在线、定性快速检测。     

Synthesis of high molecular weight polyisobutylene via cationic polymerization at elevated temperatures

A novel simple but effective initiating system of H2O/AlCl3 /veratrole (VE) has been developed to synthesize high molecular weight polyisobutylene (PIB) at elevated temperatures via cationic polymerization of isobutylene (IB) in solvent mixture of hexane/methylene dichloride (n-Hex/CH2Cl2 = 2/1, V/V). VE played very important roles in decreasing cationicity of the growing chain ends, suppressing side reactions of chain transfer and termination during polymerization, leading to production of high molecular weight PIBs. PIBs with high yields, having very high weight-average molecular weight (Mw ) of 1117000 and 370000 g/mol could be synthesized with H2O/AlCl3 /VE initiating system at VE concentration of 5.4 mmol/L at 80 and 60℃ respectively. Molecular weight of PIB increased remarkably with increasing VE concentration. The reaction order with respect to VE concentration was determined to be 3.52 via FTIR spectroscopy in combination with a diamond tipped attenuated total reflectance (ATR) immersion probe. The negative reaction order of VE was consistent with its retarding effect on IB polymerization by interacting with the propagating species. Molecular weight of PIB decreased with increasing polymerization temperature. The activation energy for polymerization degree (EDP ) could be determined to be around 23 kJ/mol when VE concentration was 5.4 mmol/L or 6.4 mmol/L.     

Effect of nanocrystalline cellulose on the curing characteristics and aging resistance properties of carbon black reinforced natural rubber

This work focused on the effect of nanocrystalline cellulose (NCC) on the curing characteristics, aging resistance and thermal stability of natural rubber (NR) reinforced with carbon black (CB). Sharing the same fillers loading of 45 parts per hundred rubber (phr), NR/NCC/CB composites with different NCC/CB ratios (i.e. 0/45, 5/40, 10/35, 15/30, 20/25 phr) were prepared and analyzed. Resorcinol and hexamethylene tetramine (RH), acting as the modifier in NR/NCC interface, was also discussed for its influence. The result showed that an relatively higher ratio of NCC/CB led to a lower torque, a shorter cure time (T ₉₀), a slightly longer scorch time (T ₁₀) and a bigger vulcanization rate constant (K). This tendency suggested that the existence of NCC accelerated the vulcanization process. Additionally, modified by RH, NR/NCC/CB compounds exhibited a short T ₁₀ and a elevated torque. And a moderate RH content would lower the E _a of vulcanization. A 10 phr substitute of CB by NCC can help to improve aging resistance in terms of mechanical properties. In a high temperature aging condition, composites with 10 phr NCC also performed the highest storage modulus (G′) among composites tested. A moderate NCC content contributed to the best retention of G′ after high temperature aging, so did the incorporation of RH. With the partial replacement of CB by NCC, the temperature of 5% weight-lose had a slight drop and the apparent crosslink density showed a decrease. Thanks to the interaction of RH with both NR and NCC, composites showed an improvement in apparent crosslink density after modified by RH.     

Crosslinked organosiloxane hybrid materials prepared by condensation of silanol and modified silica: Synthesis and characterization

Hybrid materials based on polymethylphenylsiloxane (PMPS) and organic functionalized silica were synthesized via condensation reaction between silanol and alkoxysilyl groups in the presence of quaternary ammonium hydroxide. The structure of prepared materials was investigated by FTIR and NMR, which indicate that the products have incorporated modified silica into the polymer matrix. The prepared hybrid materials show a satisfactory thermal resistance because the initial decomposition of typical product occurred at nearly 100 K higher than that of the pure polymer according to the thermogravimetric analysis (TGA) results. Differential thermogravimetric analysis (DTGA) data confirm that the thermal degradation of prepared hybrid materials comprises of two steps, of which the first one could be controlled by adjusting the content of silica particles and the ratio of surface groups on the particles. The coating films obtained from hybrid products exhibit good thermal mechanical properties. Therefore, the materials are hoped to be used for the application in thermal resistant coating.     

Synthesis and mesomorphic properties of novel fishbone-like liquid crystalline polysilsesquioxanes VI. Fishbone-like,ester-based liquid crystalline polysilsesquioxanes

Two novel kinds of fishbone-like, ester-based, liquid crystalline, random copolysilsesquioxanes, LC₁-CH₃-P and LC₂-CH₃-P, have been synthesized for the first time by stepwise coupling polymerization (SCP) from trichlorosilane monomers (RSiCl₃) containing mesogenic ester groups, using three main steps including preaminolysis, hydrolysis and polycondensation. Two new monomers 4-(11-trichlorosilylundecloyloxy)phenyl 4-methoxybenzoate (M₁) and 4-(3-trichlorosilylpropoxy)phenyl 4-methoxybenzoate (M₂) have been synthesized by hydrosilylation reaction of trichlorosilane and the mesogens 4-n-undecenoyloxyphenyl 4-methoxybenzoate and 4-allyloxyphenyl 4-methoxy-benzoate, respectively, in the presence of dicyclopentadienylplatinum(II) chloride (Cp₂Ptcl₂) catalyst. The structures and mesomorphic properties of LC₁-CH₃-P and LC₂-CH₃-P were investigated by FTIR, ¹H NMR, ¹³C NMR, ²⁹Si NMR, gel permeation chromatography, polarizing optical microscopy, differential scanning calorimetry and X-ray diffraction. It is proposed from the characterization data that these two polymers not only have an ordered ladder-like, double main chain, but also show thermotropic smectic behaviour with high clearing points and wide mesophase ranges (ΔT), which may hold promise for potential applications as highly stable gas chromatographic stationary phases.     

Synthesis and characterisation of 3-armed dendritic molecules with triphenylbenzene or triphenyltriazine as core and triphenylene derivative as shells

Two series 3-armed dendritic molecules with their 1,3,5-tris(4-methyloxyphenyl) benzene or 2,4,6-tris(4- hydroxylphenyl)-1,3,5-s-triazine core and triphenylene derivative shells connected by soft hydrocarbon chains have been synthesised and fully characterised. Whether liquid crystal (LC) or photoluminescence materials have been tuned by changing the length of the soft chain and they have been studied by POM, DSC, XRD, UV-Vis and PL. The results show that all the new dendritic compounds display UV to blue fluorescence in solvents such as DCM, THF and acetone. The TC3 compound bearing 1,3,5-tris(4-hydroxylphenyl) benzene core exhibits LC property with rectangular columnar phase (Col_r) on cooling.     

Surface Performance and Cytocompatibility Evaluation of Acrylic Acid-Mediated Carboxymethyl Chitosan Coating on Poly(tetrafluoroethylene-co-hexafluoropropylene)

To improve the biocompatibility of poly(tetrafluoroethylene-co-hexafluoropropylene) (FEP) film, a technique based on Ar plasma pretreatment and UV-induced grafting polymerization was used to immobilize carboxymethyl chitosan (CMCS) on the FEP film surfaces. Initially Ar plasma was used to treat FEP film. Then, plasma treated FEP film was modified via UV-induced grafting polymerization with hydrophilic acrylic acid (AAc) monomer. The following immobilization of CMCS on the FEP-pAAc surface was carried out via an amidation reaction. The change of chemical composition and surface morphology of FEP film were characterized by attenuated total reflectance Fourier transform infrared (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), scanning electronic microscopy (SEM) and atomic force microscopy (AFM). Results of water contact angles measurement showed that the hydrophilicity of the surface has improved significantly after surface modification. Furthermore, methyl thiazolyl tetrazolium (MTT) assay and cell morphology analysis confirmed that mouse fibroblasts (L929 cells) attachment and proliferation were improved remarkably on the modified FEP surface. These results suggest that CMCS were successfully employed to surface engineering FEP film, and enhanced its cell biocompatibility. The approach presented here may be exploited for surface modification of biomaterials.     

Curcumin Inhibits the Sortase A Activity of the Streptococcus mutans UA159

Streptococcus mutans (S. mutans) forms part of the commensal microflora and is deemed to be the major pathogen responsible for the generation of dental caries. The enzyme, sortase A enzyme, modulates the surface properties and cariogenicity of S. mutans. Curcumin has been reported to be an inhibitor of Staphylococcus aureus sortase A. In this study, inhibition of a purified S. mutans UA159 sortase A by curcumin was evaluated. Curcumin exerted strong inhibitory activity with a half maximal inhibitory concentration (IC₅₀) of 10.2?±?0.7 μM which was lower than the minimum inhibitory concentration of 175 μM and the minimum bactericidal concentration of 350 μM. These results indicated that curcumin is a S. mutans UA159 sortase A inhibitor and therefore represents as a promising anticaries agent.