骨架结构多孔TiO2薄膜增强染料敏化太阳能电池性能

以空心球状TiO₂为基体、以片状TiO₂为骨架,采用刮刀法制备了染料敏化太阳能电池的多孔TiO₂光阳极薄膜。光电转化效率测试结果表明,当作为骨架支撑材料的片状TiO₂含量为20wt%时,光阳极薄膜组装成太阳能电池的光电转化效率达到最高值4.53%,比商业P25制备的无孔无骨架TiO₂薄膜电池(4.06%)及无骨架结构的多孔TiO₂薄膜电池(4.17%)的性能均有显著提高。当片状TiO₂的最佳含量为20wt%电池薄膜厚度为33 μm时,太阳能电池光电转化效率进一步提升为7.06%。光电性能增强的原因是骨架结构有利于快速传输电子并增大染料吸附量。本研究通过设计制备具有骨架结构的多孔TiO₂薄膜为提高染料敏化太阳能电池性能提供了新的思路。     

TIBO衍生物类抗艾滋病药物三维定量结构活性关系研究

采用三维全息原子场作用矢量(3D-HoVAIF)对20个TIBO类衍生物抗艾滋病药物进行定量构效关系(QSAR)研究。运用偏最小二乘回归(Partial Least Square Regression,PLS)建模,同时采用内部及外部双重验证的办法对所得模型稳定性能进行深入分析和检验。PLS建模的复相关系数(Rcum)、留一法(Leave-one-out,LOO)交互校验(Cross-validation,CV)复相关系数(QCV)和外部样本校验复相关系数(Qext)分别为0.837、0.804、0.812。结果表明,3D-HoVAIF能较好表征TIBO类衍生物抗艾滋病药物分子结构信息,     

高效液相色谱-串联质谱法检测食品中6种邻苯二甲酸酯

建立了食品中邻苯二甲酸二丁酯(DBP)、邻苯二甲酸丁基苄基酯(BBP)、邻苯二甲酸二已酯(DEHP)、邻苯二甲酸二正苄酯(DNOP)、邻苯二甲酸二异壬酯(DINP)、邻苯二甲酸二异癸酯(DIDP)6种邻苯二甲酸酯的高效液相色谱-串联质谱检测方法。试样用正己烷∶甲基叔丁基醚∶乙腈(体积比为50∶45∶5)提取并冷冻离心去除脂肪,收集溶剂层并挥干,加入0.5g乙二胺-N-丙基硅烷(PSA)并用2mL乙腈溶液混匀,冷冻离心后过膜备用。优化分离与检测的最佳条件,采用电喷雾正离子电离(ESI+)模式和多离子反应监控(MRM)模式,外标法进行定量。该方法中DBP、BBP、DEHP、DNOP在0.1～3.0mg/L之间,DINP和DIDP在1.0～30.0mg/L之间的线性相关系数R2>0.995;检测限分别为:DBP 0.02mg/L,BBP、DEHP和DNOP 0.005mg/L,DINP和DIDP 0.10mg/L。在添加水平为0.2、0.5、1.0mg/kg时的平均加标回收率和相对标准偏差范围符合食品检测要求。该方法简便、灵敏、精确,适用于检测食品中6种邻苯二甲酸酯残留。     

二苯磷酰基取代四苯基硅的合成及在构筑宽禁带聚合物中的应用

设计并合成了二苯磷酰基取代的四苯基硅基团,并将其作为宽禁带聚合物母体材料构筑基元,通过Suzuki反应偶连3,6位取代的咔唑合成了聚合物SiCzP.对聚合物的结构进行了系统的表征.与模型聚合物SiCz相比,二苯磷酰基的强吸电子能力,降低聚合物母体材料的LUMO能级,更有利于电子的注入.SiCzP与SiCz的玻璃化转变温度分别为219与227℃,失重5%时的分解温度分别为441与426℃.二者均具有良好的成膜性,掺杂器件初步结果表明,二苯磷酰基的引入使器件的亮度和效率都得到提高,其最大流明效率和功率效率比SiCz分别提高了98%和75%.     

石墨炉原子吸收法测定PU材料中的铬

采用微波消解技术进行样品前处理,建立了石墨炉原子吸收法测定PU材料中铬含量的方法。在波长429.0 nm下,利用石墨炉程序升温测定,狭缝设为0.5 nm,塞曼效应作为背景校正。标准工作曲线线性良好,相关系数r=0.9986,方法检出限为0.051μg/L,测定结果的相对标准偏差为3.78%,加标回收率为92%～120%(n=6)。该方法简便、可行,适用于PU材料中铬的测定。     

Preparation of graphene platelet-Ru(phen) 3 2+ assemblies and their application in electrochemiluminescence detection

Graphene platelet (GP)-Ru(phen) ₃ ²⁺ assembles have been prepared through self-assembly of poly sodium styrenesulfonate (PSS) functionalized GPs and Ru(phen) ₃ ²⁺ driven by electrostatic attraction interactions in aqueous solution. The resultant assembled GP-Ru(phen) ₃ ²⁺ hybrid structure modified electrode exhibits excellent electrochemiluminescence (ECL) behaviors because of the ECL active species Ru(phen) ₃ ²⁺ contained therein.     

Empetrifranzinans A和Empetrifranzinans C的全合成及其抗肿瘤活性

以间苯三酚为起始原料,L-脯氨酸为催化剂,经由两步反应首次合成了Empetrifranzinans A(1a,总收率60%)和Empetrifranzinans C(总收率55%),其结构经1H NMR,13C NMR和HR-MS确证。初步药理筛选实验结果表明,1a对人结肠癌、肝癌、胃癌、肺腺癌、卵巢癌细胞表现出了较强的细胞毒作用,其IC50分别为<0.1,1.31,4.90,8.98和3.65μmol·L-1。     

A Hairpin Electrochemical Aptasensor for Sensitive and Specific Detection of Thrombin Based on Homogenous Target Recognition

An electrochemical aptasensor was developed for sensitive and specific detection of thrombin by combining homogenous recognition strategy and gold nanoparticles (AuNPs) amplification. Streptavidin‐alkaline phosphatase was used as reporter molecule. Compared with the traditional hairpin aptasensor monitoring the distance of the redox molecule from the electrode surface, the proposed aptasensor successfully overcome the limitations of distance and improved the stability and high affinity of the aptamer hairpin through homogenous recognition, which enhanced the sensitivity and selectivity of the sensors effectively. Additionally, AuNPs were employed to increase the active area and conductivity of the electrode, thus, improving the sensitivity of the aptasensor. As a result, the designed thrombin detection sensor obtained a lower detection limit of 0.52 pM in buffer and 6.9 pM in blood serum.     

Modified capillary electrophoresis based measurement of the binding between DNA aptamers and an unknown concentration target

The recognition of targets such as biomacromolecules, viruses and cells by their aptamers is crucial in aptamer-based biosensor platforms and research into protein function. However, it is difficult to evaluate the binding constant of aptamers and their targets that are hard to purify and quantify, especially when the targets are undefined. Therefore, we aimed to develop a modified capillary electrophoresis based method to determine the dissociation constant of aptamers whose targets are hard to quantify. A protein target, human thrombin, and one of its aptamers were used to validate our modified method. We demonstrated that the result calculated by our method, only depending on the aptamer’s concentrations, was consistent with the classical method, which depended on the concentrations of both the aptamers and the targets. Furthermore, a series of DNA aptamers binding with avian influenza virus H9N2 were confirmed by a four-round selection of capillary electrophoresis–systematic evolution of ligands by exponential enrichment, and we identified the binding constant of these aptamers by directly using the whole virus as the target with the modified method. In conclusion, our modified method was validated to study the interaction between the aptamer and its target, and it may also advance the evaluation of other receptor–ligand interactions.