Laser ablation of energetic polymer solutions: effect of viscosity and fluence on the splashing behavior

Laser plasma thrusters are a new kind of propulsion system for small satellites, and work with the thrust created by the laser ablation of a target. Liquid polymer solutions are very promising fuels for such systems, provided that no splashing of the target occurs, because ejection of droplets strongly decreases the performances of the system. We have investigated the nanosecond infrared laser ablation of glycidyl azide polymer solutions containing carbon nanoparticles as absorber. Shadowgraphy imaging revealed two cases, namely splashing regime and solid-like behavior. The transition between both regimes depends on the viscosity of the solution and on the laser fluence, and is explained by the recoil force acting on the target. Appropriate conditions to avoid splashing were identified, showing that this liquid polymer solution is a suitable fuel for laser plasma thrusters.     

Microfluidic HPLC‐Chip devices with integral channels containing methylstyrenic‐based monolithic media

Polyimide HPLC‐Chip devices containing poly(methylstyrene‐bis‐p‐vinylphenyl)ethane (MS/BVPE) stationary phase within the device channels and with wall attachment were prepared by thermally initiated free radical polymerization. The microfluidic devices were coupled to both UV and MS detectors. The potential of the MS/BVPE monolith as an alternative separation media within chip devices was investigated by side‐by‐side comparisons to particulate media within commercial devices. The chromatographic behavior of this stationary phase was comparable to particulate media for separations of proteins as the average peak width at half‐height was equal (6.2 s) for a separation within 8 min under gradient elution conditions. The ability to control the porosity characteristics of the MS/BVPE monolith with changes in polymerization time also extended its utility into small analyte (< 500 Da) applications, although more optimization is needed to match conventional RP media for these applications. The good mechanical stability of the MS/BVPE monolith within the microdevices enabled excellent run‐to‐run repeatability (%RSD retention time (? 0.16) and chip‐to‐chip reproducibility (%RSD retention time (1.4). The use of this material within enrichment channels also shows its potential value in more complex work flows.     

State Reconstruction in Higher Dimensional PDEs with Spatially Varying Parameters

The state estimation problem is considered for a diffusion-reaction system with spatially varying parameters defined on a 3-dimensional rectangular domain with the measured output being restricted to a single surface. For this, a backstepping-based observer design is applied, which enables to obtain the observer gains such that the observer error dynamics decays exponentially in the L₂-norm. At first, an idealized system output restricted to a single surface is assumed as an available measurement. Secondly, in view of a practical realization of the proposed observer, the idealized system output is reconstructed from a set of finite-dimensional measurements. The observer error convergence and the applicability of the proposed approach are evaluated by means of numerical simulations. (© 2011 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Alkyl chain barriers for kinetic optimization in dye-sensitized solar cells

The optimization of interfacial charge transfer is crucial to the design of dye-sensitized solar cells. In this paper we address the dynamics of the charge separation and recombination in liquid-electrolyte and solid-state cells employing a series of amphiphilic ruthenium dyes with varying hydrocarbon chain lengths, acting as an insulating barrier for electron-hole recombination. Dynamics of electron injection, monitored by time-resolved emission spectroscopy, and of charge recombination and regeneration, monitored by transient optical absorption spectroscopy, are correlated with device performance. We find that increasing dye alkyl chain length results in slower charge recombination dynamics to both the dye cation and the redox electrolyte or solid-state hole conductor (spiro-OMeTAD). These slower recombination dynamics are however paralleled by reduced rates for both electron injection into the TiO2 electrode and dye regeneration by the I-/I3- redox couple or spiro-OMeTAD. Kinetic competition between electron recombination with dye cations and dye ground state regeneration by the iodide electrolyte is found to be a key factor for liquid electrolyte cells, with optimum device performance being obtained when the dye regeneration is just fast enough to compete with electron-hole recombination. These results are discussed in terms of the minimization of kinetic redundancy in solid-state and liquid-electrolyte dye-sensitized photovoltaic devices.     

Yukawa Couplings in Heterotic Compactification

We present a practical, algebraic method for efficiently calculating the Yukawa couplings of a large class of heterotic compactifications on Calabi-Yau three-folds with non-standard embeddings. Our methodology covers all of, though is not restricted to, the recently classified positive monads over favourable complete intersection Calabi-Yau three-folds. Since the algorithm is based on manipulating polynomials it can be easily implemented on a computer. This makes the automated investigation of Yukawa couplings for large classes of smooth heterotic compactifications a viable possibility.     

Solvation of Na+, K+, and their dimers in helium

Helium atoms bind strongly to alkali cations which, when embedded in liquid helium, form so-called snowballs. Calculations suggest that helium atoms in the first solvation layer of these snowballs form rigid structures and that their number (n) is well defined, especially for the lighter alkalis. However, experiments have so far failed to accurately determine values of n. We present high-resolution mass spectra of Na(+)He(n), K(+)He(n), Na(2)(+)He(n) and K(2)(+)He(n), formed by electron ionization of doped helium droplets; the data allow for a critical comparison with several theoretical studies. For sodium and potassium monomers the spectra indicate that the value of n is slightly smaller than calculated. Na(2)(+)He(n) displays two distinct anomalies at n=2 and n=6, in agreement with theory; dissociation energies derived from experiment closely track theoretical values. K(2)(+)He(n) distributions are fairly featureless, which also agrees with predictions.     

Novel approaches to analysis of 3-chloropropane-1,2-diol esters in vegetable oils

A sensitive and accurate method utilizing ultra-high performance liquid chromatography (U-HPLC) coupled to high resolution mass spectrometry based on orbitrap technology (orbitrapMS) for the analysis of nine 3-chloropropane-1,2-diol (3-MCPD) diesters in vegetable oils was developed. To remove the interfering triacylglycerols that induce strong matrix effects, a clean-up step on silica gel column was used. The quantitative analysis was performed with the use of deuterium-labeled internal standards. The lowest calibration levels estimated for the respective analytes ranged from 2 to 5 μg kg⁻¹. Good recovery values (89–120%) and repeatability (RSD 5–9%) was obtained at spiking levels of 2 and 10 mg kg⁻¹. As an alternative, a novel ambient desorption ionization technique, direct analysis in real time (DART), hyphenated with orbitrapMS, was employed for no separation, high-throughput, semi-quantitative screening of 3-MCPD diesters in samples obtained by chromatographic fractionation. Additionally, the levels of 3-MCPD diesters measured in real-life vegetable oil samples (palm oil, sunflower oil, rapeseed oil) using both methods are reported. Relatively good agreement of the data generated by U-HPLC-orbitrapMS and DART-orbitrapMS were observed. With regard to a low ionization yield achieved for 3-MCPD monoesters, the methods presented in this paper were not yet applicable for the analysis of these contaminants at the naturally occurring levels.     

Decarboxylative etherification of aromatic carboxylic acids

Decarboxylative Chan-Evans-Lam-type couplings are presented as a new strategy for the regiospecific construction of diaryl and alkyl aryl ethers starting from easily available aromatic carboxylic acids. They allow converting various aromatic carboxylate salts into the corresponding aryl ethers by reaction with alkyl orthosilicates or aryl borates, under aerobic conditions in the presence of silver carbonate as the decarboxylation catalyst and copper acetate as the cross-coupling catalyst.     

Phosphate starvation as an antimicrobial strategy: the controllable toxicity of lanthanum oxide nanoparticles

Lanthanum oxide nanoparticles were utilized to scavenge phosphate from microbial growth media for the use of targeted nutrient starvation as an antimicrobial strategy. Only in phosphate poor environments a toxic effect was observed. The effect was shown on Escherichia coli, Staphylococcus carnosus, Penicillium roqueforti, and Chlorella vulgaris.