Complexometric determination of magnesium oxide in flyash blended cement

A complexometric titration method is proposed to determine magnesium oxide in flyash blended cement. A 0.50 g of sample was heated with hydrochloric acid for 10 min. The solution was diluted to 500 ml, and 50 ml was pipetted and heated to boiling with 2.5 ml of 5% ammonium oxalate solution. The solution was then made alkaline by ammonium hydroxide. The suspension was cooled and filtered. The filtrate was titrated by standard 0.002M EDTA solution. The concentration of MgO in sample was calculated. The flyash content of the sample was determined by British Standard method and the recovery factor (f) was calculated by the equation of f = 100/(99 - 0.315 x %FA). Concentration of MgO in sample was corrected by multiplying the recovery factor with concentration initially found by EDTA titration. The precision of the method is better with more time saving than the official methods.     

Phthalocyanines and related compounds: XXXVIII. Synthesis of symmetric taurine- and choline-substituted phthalocyanines

Procedures have been developed for the synthesis of a series of metal complexes derived from water-soluble anionic and cationic octa-4,5-carboxyphthalocyanine-taurine and choline conjugates.Translated from Zhurnal Obshchei Khimii, Vol. 74, No. 11, 2004, pp. 1907–1911.Original Russian Text Copyright © 2004 by Mikhalenko, Soloveva, Lukyanets.For communication XXXVII, see [1].This revised version was published online in April 2005 with a corrected cover date.     

Phthalocyanines and related compounds: XLII. Synthesis of phenyl-substituted tetraazachlorins and tetraazabacteriochlorins

New oxidation-resistant hexaphenyl-substituted tetramethyltetraazachlorin, its nickel complex, and tetraphenyl-substituted octamethyltetraazabacteriochlorin and octamethyltetraazaisobacteriochlorin nickel complexes were synthesized for the first time by mixed condensation of diphenylm aleonitrile with tetramethylsuccinonitrile in the presence of lithium dimethylaminoethoxide or nickel chloride. The products were characterized by electronic absorption, ¹H NMR, and mass spectra. Mixed condensation of diphenylsuccinonitrile with phthalonitrile in the presence of nickel chloride was found to give nickel complexes of phenylsubstituted benzo-fused tetraazaporphyrins rather than their hydrogenated derivatives.     

The study of degradable polystyrene: Photolysis in solution and photo-oxidation in films

Radical copolymerization of styrene with benzalacetophenone or benzalacetone in bulk or in suspension yielded copolymers with as much as 10 wt% of carbonyl monomer. They were characterized by GPC, viscometry and spectroscopy. Photolysis of copolymers was investigated in benzene at 313 nm. Quantum yields for main chain scissions were about 0.005 and the life-time of the triplet state was 5 nsec. Photo-oxidation in films was followed by monitoring the decrease in molecular weight and by i.r. and emission spectra. Quantum yield for main chain scission in films was about 0.0002. During photooxidation in film, the molecular weight distribution widened. A new i.r.-band appeared at 3580 cm^?1 and the carbonyl band was spread between 1700 and 1800 cm^?1. In the emission spectra, the vibrational resolved emission (typical of the carbonyl chromophore) disappeared.     

Synthesis and Properties of First Bis(fluoreno)crownophanes

Alkylation of 2,7-dihydroxy-9H-fluoren-9-one with 2-(2-chloroethoxy)ethanol, 2-[2-(2-chloroethoxy)-ethoxy]ethanol, and 2-{2-[2-(2-chloroethoxy)ethoxy]ethoxy}ethanol in dimethylformamide in the presence of potassium carbonate gave 78–80% of the corresponding diols which were treated with p-toluenesulfonyl chloride in a dioxanechloroform mixture in the presence of triethylamine at 0– 5°C (30 h). The resulting bis(p-toluene-sulfonates) were brought into condensation with 2,7-dihydroxy-9H-fluoren-9-one in a very dilute solution in dimethylformamide containing anhydrous potassium carbonate at 80–85°C. Appropriate treatment of the reaction mixture, followed by chromatographic purification afforded 53–27% of the first representatives of a new class of cyclophanes, bis(oxofluoreno)crownophanes. Raising the temperature to 95–105°C resulted in an appreciable decrease of the product yield. The yield of the target products did not increase on replacement of potassium carbonate by cesium carbonate.__________Translated from Zhurnal Organicheskoi Khimii, Vol. 41, No. 1, 2005, pp. 144–149.Original Russian Text Copyright © 2005 by Lyapunov, Kirichenko, Kulygina, Luk’yanenko.     

Analysis of cement and cement raw meal by atomic absorption spectrophotometry using a new fusion agent

A new fusion agent is proposed for the analysis of cement and cement raw meal using AAS. In the described method, 0.8 g of the fusion agent, consisting of equal portions of oxalic acid, lithium carbonate and lithium tetraborate, was mixed with 0.2 g of the sample, and the mixture was fused for 10 min at 925 degrees C in a platinum crucilbe. The fusion cake was dissolved with dilute hydrochloric acid (1 + 10) and diluted to 500 ml for the determination of Si, Al, Fe, Ti, Na and K expressed as SiO(2), Al(2)O(3), Fe(2)O(3), TiO(2), Na(2)O, and K(2)O respectively. For the determination of Ca and Mg (expressed as CaO and MgO respectively), 10 ml of the previous sample solution were mixed with 4 ml of 6% (m/v) lanthanum nitrate solution and the solution was diluted to 100 ml. The method was found to have good accuracy and precision. The time required to determine the eight elements was around 80 min for each sample.     

High-performance liquid radiochromatography: Its application for stability study of [3H] stobadin

An HPLC method was developed for studying the stability of [³H] stobadin stored in physiological saline or buffers at various pH. Optimum conditions for the separation of degradation products were elaborated. A high-performance liquid chromatograph equipped with a radioactivity detector was used.     

Statistical approach to bistable behaviour of a nonlinear system in a stationary field

Conclusions This discussion concerning the probability density confirms in a new way the results obtained in paper [1] in which a two-peak behaviour of the photocount distribution has been found. This general result depends on the particular nonlinear interaction scheme, and the bistable behaviour is caused by quantum fluctuations produced by the nonlinear interaction.As losses are not taken into account, other kinds of fluctuations that can modify the bistable behaviour are not accounted for in this paper.     

Orientational behavior of thermotropic liquid crystals on surfaces presenting electrostatically bound vesicular stomatitis virus

We report the orientational behavior of nematic phases of 4-cyano-4'-pentylbiphenyl (5CB) on cationic, anionic, and nonionic surfaces before and after contact of these surfaces with solutions containing the negatively charged vesicular stomatitis virus (VSV). The surfaces were prepared on evaporated films of gold by either adsorption of poly-L-lysine (cationic) or formation of self-assembled monolayers (SAMs) from HS(CH2)2SO3- (anionic) or HS(CH2)11(OCH2CH2)4OH (nonionic). Prior to treatment with virus, we measured the initial orientation of 5CB (delta epsilon = epsilon(parallel) - epsilon(perpendicular) > 0) to be parallel to the cationic surfaces (planar anchoring) but perpendicular (homeotropic) after equilibration for 5 days. A similar transition from planar to homeotropic orientation of 5CB was observed on the anionic surfaces. Only planar orientations of 5CB were observed on the nonionic surfaces. Because N-(4-methoxybenzylidene)-4-butylaniline (MBBA, delta epsilon = epsilon(parallel) - epsilon(perpendicular) < 0) exhibited planar alignment on all surfaces, the time-dependent alignment of 5CB on the ionic surfaces is consistent with a dipolar coupling between the 5CB and electrical double layers formed at the ionic interfaces. Treatment ofpoly-L-lysine-coated gold films (cationic) with purified solutions of VSV containing 10(8)-10(10) plaque-forming units per milliliter (pfu/mL) led to the homeotropic alignment of 5CB immediately after contact of 5CB with the surface. In contrast, treatment of anionic surfaces and nonionic surfaces with solutions of VSV containing approximately 10(10) pfu/mL did not cause immediate homeotropic alignment of 5CB. These results and others suggest that homeotropic alignment of 5CB on cationic surfaces treated with VSV of titer > or = 10(8) pfu/mL reflects the presence of virus electrostatically bound to these surfaces.     

Study of physical and thermochemical properties of modified zeolites

The treatment of zeolite with a solution of NaOH at different concentrations creates modified forms of natural zeolites.These modified zeolites exhibit an increased uptake of caesium and a satisfactory uptake of cobalt. The structural changes in the modified zeolites were studied by XRD analysis, which reveals the mineral compositions of the studied materials. The thermodynamic properties of the modified zeolites were studied by means of DTA and thermogravimetry, and the chemical composition too was determined.