Lipase from a Brazilian StrainPenicillium citrinum Cultured in a Simple and Inexpensive Medium st]Heat-Denaturation, Kinetics, and pH Stability

This work is a study of lipase production by a Brazilian strain ofPenicillium citrinum using an inexpensive and simple medium without organic nitrogen sources and of some important industrial properties, including thermostability in relation to ionic strength. The maximal lipase activity (1585 U/L) was obtained whenPenicillium citrinum was cultured on 0.75% ammonium sulfate complemented with minerals salts instead of yeast extract. Although this activity was about 55% lower than that produced in medium with yeast extract (2850 U/L), the specific activity (7.8 U/mg proteins) was higher than that obtained with the yeast extract (4.9 U/mg proteins). The morphology of fungus changed totally, with yeast extract there are smooth, solid, and spherical pellets whereas on ammonium sulfate there are small “hairy” pellets uniformly suspended in the medium. The effect of ferrous (Fe⁺⁺) ions was carried out using medium MA with and without Fe⁺⁺ ions. Lipase production byPenicillium citrinum in medium MA requires Fe⁺⁺ ions, the absence of which caused a decreased of about 50% in the specific activity (3.5 U/mg proteins). The utilization of commercial, locally available oils as carbon sources, such as soybean oil (236 U/L) and corn oil (74 U/L) resulted in lower activity compared to olive oil, showing that lipase production byPenicillium citrinum is specifically induced by olive oil. Potassium concentration in the medium can effects the production of lipase (1 mM (1585 U/L), 10 mM (1290 U/L), and 30 mM (1238 U/L), 50 mM (195 U/L), and 100 mM (2 U/L). The crude culture filtered was susceptable to thermal deactivation. It was stable at pH 6.0, but was not stable at the optimum pH (8.0-8.5) at 50 mM. At the low ionic concentration (1-25 mM) this lipase was stable at low pH (3.5-4.0). The activation energy was 22.4 ±2.2 Kcal. mol 1.     

Synthesis of non-agglomerated Ba<Subscript>0.77</Subscript>Ca<Subscript>0.23</Subscript>TiO<Subscript>3</Subscript> nanopowders by a modified polymeric precursor method

In this work, we have studied the influence of the pH on the synthesis and structural properties of the Ba_0.77Ca_0.23TiO₃ nanopowders synthesized by a modified polymeric precursor method, in order to achieve non-agglomerated powders. Synthesis, morphology, thermal reactions, crystallite and average particle size of the synthesized powders were investigated through thermal analysis (DTA/TG), X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM) and Infrared spectroscopy. In summary, Ba_0.77Ca_0.23TiO₃ nanopowders were synthesized for the first time at a relative low temperature (500 °C). It was also found that the alkalinity and acidity of the solution presented a great influence on the powder properties. The best results were obtained from solutions with pH = 8.5 and 11 whose nanopowders presented weakly agglomerate, with homogeneous particle size and a narrow size distribution (30–40 nm). This behavior could be explained based on the FT-IR results in which it was possible to see the increased of the chelation in higher pHs.     

Indene and pseudoazulene discotic liquid crystals: a synthetic and structural study

Several new liquid-crystalline indene and pseudoazulene systems are reported. These molecules give rise to either columnar hexagonal mesophases and/or columnar plastic phases. The unique nature of these compounds stems from their non-classical discotic structure. Although the molecules have rigid aromatic cores, they lack terminal tails and instead the polarizable atoms (S, halogens) or polar groups (CN, CO) act as unusual soft parts. On the basis of many structurally related materials, we conclude that for this type of compound molecular stacking in the solid state is a prerequisite for the appearance of a columnar mesophase, although other intermolecular interactions within the layers are also important in establishing liquid-crystalline order. The behavior reported for these mesomorphic molecules opens up new possibilities in the search for related molecular interactions that might be useful for the construction of supramolecular architectures with particular properties.     

Complexes with ambidentate ligands derived from pyridine and pyrimidine-Part 1. Cyclic nickel(II) complexes

Summary In a series of hexacoordinated nickel(II) complexes, prepared from thio-, sulphinyl, and carbonyl derivatives of pyridine and pyrimidine, the endocyclic N-atom was always the preferred basic site; the sulphinyl O-atom was also a donor centre, forming 5-membered heterocycles, whereas the carbonyl O-atom did not bond to the metal. Alkylthio derivatives did not react, unlike thiolate anions, which form N, S-bonded 4-membered rings. On the other and 2,2-bis(pyridyl)ketone bonded exclusively through the N-atoms, forming 6-membered cycles.     

Flexible ureasil hybrids with tailored optical properties through doping with metal nanoparticles

Hybrid organic-inorganic nanocomposites containing uniform distributions of metal nanoparticles have been prepared by mixing a preformed nanoparticle colloid with the precursors of a ureasil, prior to the sol-gel transition. These nanocomposites possess not only high optical quality and optical features dictated by the size and shape of the nanoparticle dopants but also a high degree of flexibility, which can largely enhance the range of applications in practical devices. The deposition of a uniform silica shell on the nanoparticle surface prior to the sol-gel transition was found to be required to maintain the colloidal stability during the process and, thus, to retain the optical properties in the final nanocomposite material. This method can be readily extended to other materials, such as semiconductor and magnetic nanoparticles.     

Electrostatic patterning of a silica surface: a new model for charge build-up on a dielectric solid

The polarization of interdigitated gold electrodes mounted over a silica thin film formed by oxidation of a Si wafer produces reproducible electrostatic patterns with overall excess negative charge, as observed by scanning electric potential microscopy. Domain charge concentrations as high as 76 charge units per square micrometer are obtained when a 5 V difference is applied to the electrodes thus producing fields in the 10(6) V m(-1) range. These patterns vanish when the electrodes are short-circuited and grounded. Characteristic times for pattern formation and relaxation are in the order of 10 min. The results are consistent with a model based on the discharge of H(+) ions at the negative electrodes, leaving behind immobile surface-bound SiO(-) groups and thus showing that chemisorption phenomena are decisive for electrostatic charging of insulators.     

VISIBLE CHEMILUMINESCENCE ASSOCIATED WITH THE REACTION BETWEEN METHEMOGLOBIN OR OXYHEMOGLOBIN WITH HYDROGEN PEROXIDE

Abstract Visible chemiluminescence is emitted in the irreversible deactivation of hemoglobin or methemoglobin with excess H₂O₂. The emission takes place in two phases. The most intense one lasts a few seconds and is followed by a second phase of lower intensity that remains for longer periods. This second phase presents chaotic or sustained oscillations. Free radicals are implicated in the luminescent process since the emission can be reduced by free radical scavengers such as 6-hydroxy-2,5,7,8,-tetramethylchroman-2-carboxylic acid (Trolox) or ascorbic acid. These additives lead to a delay in reaching the maximum intensity, which can be related to their consumption, implying substantial recycling of the hemoprotein. Chemiluminescence is also observed in the oxidation of hemin by H₂O₂, suggesting a role for the heme group in the processes leading to the excited state production. The lower intensity observed in the presence of hemin can be related to the contribution of the globin chains.     

Stress development during drying of calcium carbonate suspensions containing carboxymethylcellulose and latex particles

Stress development during drying of coatings produced from aqueous dispersions of calcium carbonate particles in the presence and absence of organic binders was studied using a controlled-environment stress apparatus that simultaneously monitored drying stress, weight loss, and relative humidity. Specifically, the influence of two organic binders on drying stress evolution was investigated: (1) carboxymethylcellulose, a water-soluble viscosifying aid, and (2) a styrene-butadiene latex emulsion of varying glass transition temperature. The stress histories exhibited three distinct regions. First, a period of stress rise was observed, which reflected the capillary tension exerted by the liquid on the particle network. Second, a maximum stress was observed. Third, it was followed by a period of either stress decay or rise depending on the organic species present. Significant differences in stress histories were observed between coatings containing soluble and nonsoluble binders. Maximum drying stresses (sigmamax) of 0.2-0.5 MPa were observed for coatings produced from pure calcium carbonate or calcium carbonate-latex suspensions, whereas coatings with carboxymethylcellulose exhibited substantially higher sigmamax values of 1-2 MPa. Upon drying, these coatings were quite hygroscopic, such that cyclic variations in relative humidity induced large cyclic changes in residual stress.     

Liquid chromatography-diode array detection-electrospray ionisation mass spectrometry/nuclear magnetic resonance analyses of the anti-hyperglycemic flavonoid extract of Genista tenera. Structure elucidation of a flavonoid-C-glycoside

The anti-hyperglycemic flavonoid extract obtained from Genista tenera was first studied by liquid chromatography (LC)-diode array detection (DAD) which showed the presence of two major compounds. One of them was identified as genistein-7-O-glucoside. Luteolin-7-O-glucoside was detected as a minor constituent, while luteolin-7,3'-di-O-glucoside and rutin were found in trace amounts. LC-DAD-ESI-MS and NMR were used to confirm the structure of these compounds and allowed the elucidation of the structure of the unknown major compound, which is the flavonoid 5,7,4'-trihydroxyisoflavone-8-C-glucoside.     

Chemical behavior of the biradicaloid (HO...ONO) singlet states of peroxynitrous acid. The oxidation of hydrocarbons, sulfides, and selenides

Various high levels of theory have been applied to the characterization of two higher lying biradicaloid metastable singlet states of peroxynitrous acid. A singlet minimum (cis-2) was located that had an elongated O-O distance (2.17 A) and was only 12.2 kcal/mol [UB3LYP/6-311+G(3df,2p)+ZPVE] higher in energy than its ground-state precursor. A trans-metastable singlet (trans-2) was 10.9 kcal/mol higher in energy than ground-state HO-ONO. CASSCF(12,10)/6-311+G(d,p) calculations predict the optimized geometries of these cis- and trans-metastable singlets to be close to those obtained with DFT. Optimization of cis- and trans-2 within the COSMO solvent model suggests that both exist as energy minima in polar media. Both cis- and trans-2 exist as hydrogen bonded complexes with several water molecules. These collective data suggest that solvated forms of cis-2.3H(2)O and trans-2.3H(2)O represent the elusive higher lying biradicaloid minima that were recently (J. Am. Chem. Soc. 2003, 125, 16204) advocated as the metastable forms of peroxynitrous acid (HOONO). The involvement of metastable trans-2 in the gas phase oxidation of methane and isobutane is firmly established to take place on the unrestricted [UB3LYP/6-311+G(d,p)] potential energy surface (PES) with classical activations barriers for the hydrogen abstraction step that are 15.7 and 5.9 kcal/mol lower than the corresponding activation energies for producing products methanol and tert-butyl alcohol formed on the restricted PES. The oxidation of dimethyl sulfide and dimethyl selenide, two-electron oxidations, proceeds by an S(N)2-like attack of the heteroatom lone pair on the O-O bond of ground-state peroxynitrous acid. No involvement of metastable forms of HO-ONO was discernible.