Mechanical properties of anion exchange membranes by combination of tensile stress–strain tests and dynamic mechanical analysis

The thermomechanical properties of anion exchange polymers based on polysulfone (PSU) quaternized with trimethylamine (TMA) or 1,4‐diazabicyclo[2.2.2]octane (DABCO) and containing hydroxide or chloride anions by tensile stress–strain tests and dynamic mechanical analysis (DMA) have been determined. The reported mechanical properties included the Young's modulus, tensile strength, and elongation at break from tensile tests and the storage and loss modulus and glass transition temperature from DMA. The anion exchange membranes behaved as stiff polymers with Young's modulus in the order of 1 GPa, relatively with high strength (about 30 MPa) and low elongation at break (around 10%) was observed. Tensile tests were also made with membranes exchanged with hydrogen‐carbonate and carbonate anions to control the absence of important carbonation of the OH form. The glass transition temperatures were of the order of 150 °C (PSU‐TMA) or 200 °C (PSU‐DABCO) for the hydroxide form, confirmed by differential scanning calorimetry; they increase further by about 50 K, when hydroxide ions are replaced by chloride. This result and the increase of the storage modulus could be interpreted by the higher hydration of hydroxide ions and the plasticizing effect of water, which reduced the Van der Waals interactions between the macromolecular chains. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1180–1187     

Dendronized Anionic Gold Nanoparticles: Synthesis,Characterization, and Antiviral Activity

Anionic carbosilane dendrons decorated with sulfonate functions and one thiol moiety at the focal point have been used to synthesize water‐soluble gold nanoparticles (AuNPs) through the direct reaction of dendrons, gold precursor, and reducing agent in water, and also through a place‐exchange reaction. These nanoparticles have been characterized by NMR spectroscopy, TEM, thermogravimetric analysis, X‐ray photoelectron spectroscopy (XPS), UV/Vis spectroscopy, elemental analysis, and zeta‐potential measurements. The interacting ability of the anionic sulfonate functions was investigated by EPR spectroscopy with copper(II) as a probe. Different structures and conformations of the AuNPs modulate the availability of sulfonate and thiol groups for complexation by copper(II). Toxicity assays of AuNPs showed that those produced through direct reaction were less toxic than those obtained by ligand exchange. Inhibition of HIV‐1 infection was higher in the case of dendronized AuNPs than in dendrons.     

A New Easy Access to Enantiomerically Pure 2,2'-Dihydroxy-1,1'-Binaphthyl

Optically pure binaphthyl structures make up the most important family of auxiliaries, ligands and catalysts used in enantioselective reactions. Syntheses of 2,2'-disubstituted-1,1'-binaphtyl derivatives were carried out one pot in water by oxidative coupling with FeCl₃ in the presence of - and -cyclodextrin (CD) derivatives. A new efficient and inexpensive preparation of trihydroxyethyl- and tri-2-hydroxypropyl- - and -CD afforded these powerful solubilizing agents. The resolution of racemic 2,2'-dihydroxy-1,1'-binaphthyl was easily achieved by semipreparative HPLC separating diastereomers obtained from the reaction with (-)menthyl chloroformate. Final basic hydrolysis afforded the enantiomerically pure product.     

Assessment of enzyme-linked immunosorbent assay for the determination of 2,4,5-TP in water and soil

A highly sensitive and specific indirect enzyme-linked immunosorbent assay is described for Silvex, 2-(2,4,5 trichlorophenoxy)propionic acid, (2,4,5-TP). One specific feature of the immunoassay is the use of simple chemical activation of chlorophenoxy acids to prepare both the immunizing and coating conjugates. The assay is based on the use of polyclonal antibodies raised against 2,4,5-TP, and a peroxidase-labeled secondary antibody for colorimetric detection. The effect of different chemical conditions (pH, and salt and detergent concentration) on immunoassay performance has been studied. Under the best conditions the least detectable dose and the sensitivity (IC(50)) for 2,4,5-TP were 0.05 micro g L(-1) and 0.80 micro g L(-1), respectively. The optimized immunoassay was also highly specific, showing little (6.9% for 2,4,5-T) or no cross-reactivity with other similar herbicides. The assay was used to determine 2,4,5-TP in water and soils. The excellent recoveries obtained (mean values ranging between 89% and 104%) make this immunoassay a suitable screening method for either environmental monitoring or laboratory quantification of 2,4,5-TP.     

Reduced data acquisition time in multi-dimensional NMR spectroscopy using multiple-coil probes

A new hardware-based approach is presented to reduce data acquisition times in multi-dimensional NMR spectroscopy using a multiple-coil probe. Using a four-coil setup, two-dimensional COSY and TOCSY spectra were acquired in one-quarter the time of conventional spectra by simultaneous acquisition of different effective t1 evolution times for each coil. Data processing consists of simple phase-shifting and intensity normalization of the individual data sets, and results in spectra almost identical to those acquired in a conventional manner. This method can potentially be integrated with other new data acquisition and processing schemes for further increases in data acquisition speed.     

Optimization of carbohydrate silylation for gas chromatography

We developed and optimized a new carbohydrate mono- and disaccharides silylation reaction, replacing pyridine and requiring lower reaction temperature and less time. Our method consists of three basic steps. The first one is oxime formation, the second one silylate derivative and the last one gas chromatography separation and quantification with an internal standard. We evaluated several solvents, including acetonitrile, hydroxylamine and aniline. We found aniline to be the best reaction media for oxime formation with hydroxylamine hydrochloride. Among silylation agents we found N,O-bis(trimethyl)trifluoroacetamide (BSTFA) was the most efficient. Together these reagents favored both a short analysis time and fewer by-products. We evaluated the method with model solutions containing: arabinose and co-eluting xylose, fructose, glucose, sucrose and salicin (internal standard) and found it suitable for processed food analysis.     

Tuning iridium(III) phenylpyridine complexes in the "almost blue" region

We report on the synthesis and photophysical properties of blue emitting iridium(iii) complexes. The use of a negatively charged ligand, such as a triazolyl pyridine, allows a facile preparation, maintaining the high energy emission (blue region) of heteroleptic complexes. We discuss the role played by electron withdrawing substituents of a different nature and also how the substitution position of the same group influences the spectroscopical behaviour.