A new characterisation of hereditary pi rings

In this paper we prove a new characterisation of hereditary PI rings, namely we show that a Noetherian, but not Artinian, PI ringR that is an order in an Artinian ring splits into a direct sum of an Artinian ring of finite representation type and hereditary semiprime rings if and only if all its proper Artinian factor rings are of finite representation type. We also show, through examples, that the above characterisation does not hold for some more general settings. Supported by the EC via TMR-Fellowship ERB4001GT63713.     

Reaction of Sulfene wild Heterocyclic N,N-Disubstituted α-Aminomethylene Ketones IV. Synthesis of 3,4-Dihydro-5H-[1]benzothiopyratio [3,4-e]-1,2-oxathiin and 2,3,6,7-Tetrahydro-5H-thiopyrano[3,4-e]-1,2-oxathiin Derivatives

The reaction of sulfene with N,N-disubstituted 3-aminomethylene-2,3-dihydro-4-thiochromanones and-2,3,5,6-tetrahydro-4-thiopyranones gave 1,4-cycloadducts which are derivatives of new heterocyclic systems, namely 3,4-dihydro-5H-[1]benzothiopyrano[3,4-e]-1,2-oxathiin and 3,4,7,8-tetrahydro-5H-thiopyrano[3,4-e]-1,2-oxathiin, respectively. Furthermore, some pyrazole derivatives VII and VIII were prepared from 3-hydroxymethylene-2,3-dihydro-4-thiochromanone or 2,3,5,6-tetrahydro-4-thiopyranone and hydrazines.     

Organocatalytic enantioselective synthesis of highly functionalized polysubstituted pyrrolidines

The organocatalytic conjugate addition of different aldehydes to beta-nitroacrolein dimethyl acetal, generating the corresponding highly functionalized nitroaldehydes in high yields and with high stereoselectivities, has been studied in detail. These transformations have been achieved by using both readily available starting materials in a 1:1 ratio as well as commercially available catalysts at a 10 mol % catalyst loading. Furthermore, a very short and efficient protocol has been devised for the preparation of highly enantioenriched pyrrolidines containing two or three contiguous stereocenters starting from the obtained Michael adducts. 3,4-Disubstituted pyrrolidines have been obtained in a single step by Zn-mediated chemoselective reduction of the nitro group followed by intramolecular reductive amination, and trisubstituted homoproline derivatives have been prepared by means of an olefination reaction and a cascade process involving chemoselective reduction of the nitro group followed by a fully diastereoselective intramolecular aza- Michael reaction.     

Structural study and physical properties of a new phosphate KCuFe(PO4)2

Single crystals of a new phosphate KCuFe(PO₄)₂ have been prepared by the flux method and its structural and physical properties have been investigated. This compound crystallizes in the monoclinic system with the space group P2₁/n and its parameters are: a=7.958(3) Å, b=9.931(2) Å, c=9.039(2) Å, β=115.59(3)° and Z=4. Its structure consists of FeO₆ octahedra sharing corners with Cu₂O₈ units of edge-sharing CuO₅ polyhedra to form undulating chains extending infinitely along the b-axis. These chains are connected by the phosphate tetrahedra giving rise to a 3D framework with six-sided tunnels parallel to the [101] direction, where the K⁺ ions are located. The Mössbauer spectroscopy results confirm the exclusive presence of octahedral Fe³⁺ ions. The magnetic measurements show the compound to be antiferromagnetic with C_m=5.71 emu K/mol and θ=−156.5 K. The derived experimental effective moment μ_ex=6.76μ_B is somewhat higher than the theoretical one of μ_th=6.16μ_B, calculated taking only into account the spin contribution for Fe³⁺ and Cu²⁺ cations. Electrical measurements allow us to obtain the activation energy (1.22 eV) and the conductivity measurements suggest that the charge carriers through the structure are the potassium cations.     

Determination of cadmium by electrothermal atomic absorption spectrometry after microwave-assisted digestion of animal tissues and sewage sludges

The determination of cadmium in different sample types has been carried out by electrothermal atomization atomic absorption spectrometry with D(2)-background correction using a unpyrocoated graphite tube, after pressurized microwave-assisted digestion. Five chemical modifiers [(NH(4))(2)HPO(4), Pd(NO)(3))(2), Ni(NO(3))(2), thiourea and Triton X-100] have been assayed and nickel nitrate has been found to be most effective for an accurate determination of cadmium in mussel tissue, pig kidney and sewage sludge. The characteristic mass of the method is of the order of 1 pg and the limit of detection is lower than 0.1 ng/ml.     

Ionomic profiling of Nicotiana langsdorffii wild-type and mutant genotypes exposed to abiotic stresses

To provide a new insight into the response of plants to abiotic stresses, the ionomic profiles of Nicotiana langsdorffii specimens have been determined before and after exposure to toxic metals (chromium) or drought conditions. The plants were genetically transformed with the rat glucocorticoid receptor (GR) or the gene for Agrobacterium rhizogenes rolC, because these modifications are known to produce an imbalance in phytohormone equilibria and a significant change in the defence response of the plant. Elemental profiles were obtained by developing and applying analytical procedures based on inductively coupled plasma atomic emission and mass spectrometry (ICP–AES/MS). In particular, the removal of isobaric interferences affecting the determination of Cr and V by ICP–MS was accomplished by use of a dynamic reaction cell, after optimization of the relevant conditions. The combined use of ICP atomic emission and mass spectrometry enabled the determination of 29 major and trace elements (Ba, Bi, Ca, Cd, Co, Cr, Cu, Eu, Fe, Ga, K, Li, Mg, Mn, Mo, Na, P, Pb, Pt, Rb, S, Sb, Sn, Sr, Te, V, W, Y, and Zn) in different parts of the plants (roots, stems, and leaves), with high accuracy and precision. Multivariate data processing and study of element distribution patterns provided new information about the ionomic response of the target organism to chemical treatment or water stress. Genetic modification mainly affected the distribution of Bi, Cr, Mo, Na, and S, indicating that these elements were involved in biochemical processes controlled by the GR or rolC genes. Chemical stress strongly affected accumulation of several elements (Ba, Ca, Fe, Ga, K, Li, Mn, Mo, Na, P, Pb, Rb, S, Sn, Te, V, and Zn) in different ways; for Ca, Fe, K, Mn, Na, and P the effect was quite similar to that observed in other studies after treatment with other transition elements, for example Cu and Cd. The effect of water deficit was less evident, mainly consisting in a decrease of Ba, Cr, Na, and Sr in roots.

Controllable Intramolecular Motions That Generate Fluorescent Signals for a Metal Scorpionate Complex

Simply by changing the pH value, the side chain of complex 1 can be reversibly moved between two positions. Coordination to the metal center through the nitrogen atom of the side chain at moderate pH values is accompanied by a decrease in fluorescence intensity (from I_F=100% to I_F=60%). A further decrease is observed upon deprotonation of the bound water molecule at higher pH (I_F≤2%). Therefore, 1 can be seen as a molecular three-position switch.     

Aggregation induced colour change for phosphorescent iridium(III) complex-based anionic surfactants

We describe a new class of water soluble metallosurfactant molecules based on luminescent neutral iridium(III) complexes. The compounds possess an alkyl chain terminated with a negatively charged group, a sulphate. Due to their amphiphilic nature they assemble in aggregates in water and their photophysical properties, as well as the morphological characterization of the assemblies are presented. In particular, UV-Vis absorption, steady-state and time-resolved emission spectroscopy, dynamic light scattering and scanning electron microscopy techniques have been employed towards the analysis of the assemblies in different media. Comparison with the single components shows that the aggregates have very different photophysical properties. Importantly, the change in colour upon self-assembly is a remarkable feature which could be used for the design of probes which can change properties in different environments.     

Assembling a Phthalocyanine and Perylenediimide Donor–Acceptor Hybrid through a Platinum(II) Diacetylide Linker

In a novel electron‐donor–acceptor conjugate, phthalocyanine (Pc) and perylenediimide (PDI) are connected through a trans‐platinum(II) diacetylide linker to yield Pc‐Pt‐PDI 1 . In the ground state, the presence of Pt^II disrupts the electronic communication between the two electroactive components, as revealed by UV/Vis spectroscopy and electrochemical studies. The photophysical behavior of 1 is compared with that of the corresponding Pc‐PDI electron‐donor–acceptor conjugate 2 in terms of charge separation and charge recombination. The insertion of Pt^II between Pc and PDI impacts the results in a longer‐lived Pc ^{. +}/PDI ^{. ?} radical ion‐pair state. In addition, the intermediately formed Pc triplet excited state is formed with higher quantum yields in 1 than in 2 .     

A New Easy Access to Enantiomerically Pure 2,2'-Dihydroxy-1,1'-Binaphthyl

Optically pure binaphthyl structures make up the most important family of auxiliaries, ligands and catalysts used in enantioselective reactions. Syntheses of 2,2'-disubstituted-1,1'-binaphtyl derivatives were carried out one pot in water by oxidative coupling with FeCl₃ in the presence of - and -cyclodextrin (CD) derivatives. A new efficient and inexpensive preparation of trihydroxyethyl- and tri-2-hydroxypropyl- - and -CD afforded these powerful solubilizing agents. The resolution of racemic 2,2'-dihydroxy-1,1'-binaphthyl was easily achieved by semipreparative HPLC separating diastereomers obtained from the reaction with (-)menthyl chloroformate. Final basic hydrolysis afforded the enantiomerically pure product.