Flow-injection determination of total organic fluorine with off-line defluorination reaction on a solid sorbent bed

Considering recent reports on widespread occurrence and concerns about perfluoroalkyl substances (PFAS) in environmental and biological systems, analysis of these compounds have gained much attention in recent years. Majority of analyte-specific methods are based on a LC/MS/MS or a GC/MS detection, however many environmental or biological studies would benefit from a total organic fluorine (TOF) determination. Presented work was aimed at developing a method for TOF determination. TOF is determined as an amount of inorganic fluoride obtained after defluorination reaction conducted off-line using sodium biphenyl reagent directly on the sorbent without elution of retained analytes. Recovered fluoride was analyzed using flow-injection system with either fluorimetric or potentiometric detection. The TOF method was tested using perfluorocarboxylic acids (PFCA), including perfluorooctanoic acid (PFOA), as model compounds. Considering low concentrations of PFAS in natural samples, solid-phase extraction as a preconcentration procedure was evaluated. Several carbon-based sorbents were tested, namely multi-wall carbon nanotubes, carbon nanofibres and activated carbon. Good sorption of all analytes was achieved and defluorination reaction was possible to carry out directly on a sorbent bed. Recoveries obtained for PFCAs, adsorbed on an activated carbon sorbent, and measured as TOF, were 99.5 ± 1.7, 110 ± 9.4, 95 ± 26, 120 ± 32, 110 ± 12 for C4, C6, C8, C10 and C12-PFCA, respectively. Two flow systems that would enable the defluorination reaction and fluoride determination in a single system were designed and tested.     

Computational study of the melting-freezing transition in the quantum hard-sphere system for intermediate densities. II. Structural features

The structural features of the quantum hard-sphere system in the region of the fluid-face-centered-cubic-solid transition, for reduced number densities 0.45相似文献   

Variational calculation of static and dynamic vibrational nonlinear optical properties

The vibrational configuration interaction method used to obtain static vibrational (hyper)polarizabilities is extended to dynamic nonlinear optical properties in the infinite optical frequency approximation. Illustrative calculations are carried out on H(2)O and NH(3). The former molecule is weakly anharmonic while the latter contains a strongly anharmonic umbrella mode. The effect on vibrational (hyper)polarizabilities due to various truncations of the potential energy and property surfaces involved in the calculation are examined.     

Molecular weight distributions of industrially-produced poly-(epsilon-caprolactams) by gel permeation chromatography

Gel permeation chromatography with differential refractometry is used to obtain molecular weight distributions (MWD) of poly-(epsilon-caprolactams). Elution is carried out using an m-cresolchlorobenzene mixture (50:50, v/v) at 50 degrees C. MW values are obtained by a Hamielec-based calibration method, using broad-MWD poly-(epsilon-caprolactam) standards with the same chemical nature and similar MWD to the samples. Relative errors for the number-average MW (Mn) using this calibration method range from 0.4% (in the low polyamide MW range) to 20% (in the high polyamide MW range). These values are much lower than those obtained from narrow-MWD polystyrene calibration, which range from 39% to 78%. Similar values have been obtained for the other usual average MW parameters. The ability to obtain repeatability parameters for a given confidence interval and the utilization of statistical criteria for chromatogram rejection allow this method to be used in quality control for MWD of poly-(epsilon-caprolactams). Thus, production variables are related to polyamide-6 behavior in its ulterior treatment. Typical relative standard deviation percentages (for n=6) of a polyamide sample range from 1.9% (for Mn) to 3.3% (for M(z+1)).     

Energy decompositions according to physical space partitioning schemes: treatments of the density cumulant

This article is a continuation of our previous paper on schemes of energy decompositions of molecular systems in the real space [D. R. Alcoba et al., J. Chem. Phys. 122, 074102 (2005)] now using correlated state functions. We study, according to physical arguments, the appropriate management of the density cumulant arising from the second-order reduced density matrix at correlated level, whose contributions can be assigned to one-center or to two-center terms in the energy partitioning. Our treatments are applied within two physical space partitioning schemes: the Bader partitioning into atomic basins and the fuzzy atom procedure. The results obtained in selected molecules are analyzed and discussed in detail.     

Monitoring by liquid chromatography coupled to mass spectrometry the impact of pH and temperature on the pigment pattern of cactus pear fruit extracts

The influence of pH and moderate heating (50 degrees C) on the color and individual betacyanin content of pigment extracts from cactus pear fruits (Opuntia stricta) is studied in the course of this paper. The study is carried out by using a high-performance liquid chromatograph equipped with a photodiode array detector and coupled to a mass spectrometer. The results point to a pH-dependent degradation mechanism, which is reflected in the chromatographic patterns obtained at different exposure times (0-28 h). At pH 3, 15-descarboxy-betanin is the most resistant betacyanin derivative. At pH 5, seven peaks are detected after 8 h, the most prominent being betanin, cyclo-dopa-5-O-beta-glucoside, and betalamic. In the assay conducted at pH 7, rapid color loss affects all the pigments, except for betanin.     

Principles of analytical calibration/quantification for the separation sciences

Calibration is an operation whose main objective is to know the metrological status of a measurement system. Nevertheless, in analytical sciences, calibration has special connotations since it is the basis to do the quantification of the amount of one or more components (analytes) in a sample, or to obtain the value of one or more analytical parameters related with that quantity. Regarding this subject, the aim of analytical calibration is to find an empiric relationship, called measurement function, which permits subsequently to calculate the values of the amount (x-variable) of a substance in a sample, from the measured values on it of an analytical signal (y-variable). In this paper, the metrological bases of analytical calibration and quantification are established and, the different work schemes and calibration methodologies, which can be applied depending on the characteristic of the sample (analyte+matrix) to analyse, are distinguished and discussed. Likewise, the different terms and related names are clarified. A special attention has been paid to those analytical methods which use separation techniques, in relation with its effect on calibration operations and later analytical quantification.     

Hematite spindles with optical functionalities: growth of gold nanoshells and assembly of gold nanorods

The layer-by-layer (LBL) assembly method, combined with the seeded growth technique, have been used to deposit gold shells on the surface of hematite (alpha-Fe(2)O(3)) spindles. While the LBL method yields dense coatings of preformed Au nanoparticles, when AuCl(-)(4) ions are further reduced by a mild reducing agent, thicker, rough nanostructured shells can be grown. The deposition process was monitored by TEM and UV-visible spectroscopy, demonstrating a gradual change in the optical features of the colloids as the surface is more densely covered. The particles so-prepared can find useful applications in cancer therapy and as SERS substrates. Additionally, we show that Au nanorods can be assembled on hematite spindles, providing a flexible way to tune the optical properties of the resulting composite colloids.     

Aggregation and adsorption of reactive dyes in the presence of an anionic surfactant on mesoporous aminopropyl silica

A surface tension technique was used to determine the critical aggregation concentration (cac) of a yellow and a red dye in relation to the presence of the anionic surfactant sodium dodecylbenzene sulfonate (DBS) and to temperature changes in buffered aqueous solutions. The cac values of the yellow dye increase from 25 to 45 degrees C (from 41.37 to 50.32 mg L-1) and decrease from 45 to 55 degrees C (from 50.32 to 38.72 mg L-1). The cac values for the red dye/DBS aggregates decrease (from 124.52 to 88.50 mg L-1) from 25 to 55 degrees C. Adsorption of the two dyes onto a mesoporous aminopropyl silica (Sil-NH2) was also studied. The adsorption of the yellow dye increases with an increase in temperature from 25 to 55 degrees C. In the presence of DBS the adsorption on Sil-NH2 for the yellow dye decreases, and for the red dye increases from 25 to 55 degrees C. Adsorptions occurred below and above the cac of the anionic dyes/DBS aggregates. Adsorption of the dyes onto Sil-NH2 fitted well to the Langmuir, Freundlich, and Redlich-Peterson adsorption models. However, in the presence of DBS, only the Freundlich model fit the experimental adsorption data at low dye concentrations (less than 400 mg L-1). In this case, the Redlich-Peterson model was only fitted to the red dye adsorption data. The magnitude of the Dubinin-Radushkevich energetic parameters (E, from 7.00 to 15.00 kJ mol-1) indicates that the adsorption of the dyes onto Sil-NH2, in the absence and in the presence of DBS, is controlled by water adsorbed/dye in solution ion-exchange interactions. It is observed that the values of DeltaadsH are positive for both dyes and the values are quite similar to each other. The exception is the adsorption of the yellow dye in the presence of DBS, which is slightly exothermic. The DeltaadsG values are all negative. However, the interactions of the dyes with Sil-NH2 silica are more spontaneous in the presence of the surfactant. The positive adsorption entropy values (DeltaadsS) for the interaction of the dyes suggest that entropy is a driving force of the dye adsorptions. However, the entropic contribution is higher for the adsorptions in the presence of DBS. It was suggested that the chemical structures of the dyes play an important role in the formation of the dye/DBS aggregates and in dye adsorption onto the aminopropyl silica.     

Simultaneous determination of gasoline oxygenates and benzene, toluene, ethylbenzene and xylene in water samples using headspace-programmed temperature vaporization-fast gas chromatography-mass spectrometry

A sensitive method is presented for the fast analysis of seven fuel oxygenates (methanol, ethanol, tert-butyl alcohol (TBA), methyl tert-butyl ether (MTBE), ethyl tert-butyl ether (ETBE), tert-amyl methyl ether (TAME) and diisopropyl ether (DIPE)) and benzene, toluene, ethylbenzene and p-xylene (BTEX) in water samples. The applicability of a headspace (HS) autosampler in combination with a GC device equipped with a programmable temperature vaporizer (PTV) and a MS detector is explored. The proposed method achieves a clear improvement in sensitivity with respect to conventional headspace methods due to the use of the PTV. Two different packed liners with materials of different trapping strengths (glass wool and Tenax-TA) were compared. The benefits of using Tenax-TA instead of glass wool as packed material for the measurement of the 11 compounds emerged as better signal-to-noise ratios and hence better detection limits. The proposed method is extremely sensitive. The limits of detection are of the order of ng/L for six of the compounds studied and of the order of microg/L for the rest, with the exception of the most polar and volatile compound: methanol. Precision (measured as the relative standard deviation for a level with an S/N ratio close to 3) was equal to or lower than 15% in all cases. The method was applied to the determination of the analytes in natural matrixes (tap, river and sea water) and the results obtained can be considered highly satisfactory. The methodology has much lower detection limits than the concentration limits proposed in drinking water by the US Environmental Protection Agency (EPA) and the European Union for compounds under regulation.