J-aggregation of a water-soluble tetracationic porphyrin in mixed LB films with a calix[8]arene carboxylic acid derivative

The molecular organization of a mixed film, containing a water-soluble tetracationic porphyrin (TMPyP) and a p-tert-butyl calix[8]arene octacarboxylic acid derivative (C8A), at the air-water interface and on a solid support (LB film), has been investigated. Although the TMPyP aggregation was not detected at the air-water interface, TMPyP J-aggregates have been found in the LB films (Y-type). Unlike tetraanionic porphyrins, for example TSPP, the TMPyP J-aggregates are not induced by a zwitterion formation. The TMPyP J-aggregation is a result of a "double comb" configuration, where porphyrins from opposite layers are interwoven in a linear infinite J-aggregate. Our results confirm that TMPyP molecules tend to self-aggregate strongly, provided the electrostatic repulsions of their peripheral groups are cancelled by the anionic groups of the C8A matrix.     

Controlling interfacial curvature in nanoporous silica films formed by evaporation-induced self-assembly from nonionic surfactants. II. Effect of processing parameters on film structure

The double-gyroid phase of nanoporous silica films has been shown to possess facile mass-transport properties and may be used as a mold to fabricate a variety of highly ordered inverse double-gyroid metal and semiconductor films. This phase exists only over a very small region of the binary phase diagram for most surfactants, and it has been very difficult to synthesize metal oxide films with this structure by evaporation-induced self-assembly (EISA). Here, we show the interplay of the key parameters needed to synthesize these structures reproducibly and show that the interfacial curvature may be systematically controlled. Grazing angle of incidence small-angle X-ray scattering (GISAXS) is used to determine the structure and orientation of nanostructured silica films formed by EISA from dilute silica/(poly(ethylene oxide)-b-poly(propylene oxide)-b-alkyl) surfactant solutions. Four different highly ordered film structures are observed by changing only the concentration of the surfactant, the relative humidity during dip-coating, and the aging time of the solution prior to coating. The highly ordered films progress from rhombohedral (Rm) to 2D rectangular (c2m) to double-gyroid (distorted Iad) to lamellar systematically as interfacial curvature decreases. Under all experimental conditions investigated, increasing the aging time of the coating solution was found to decrease the interfacial curvature. In particular, this parameter was critical to being able to synthesize highly ordered, pure-phase double-gyroid films. The key role of the aging time is shown via processing diagrams that map out the interplay between the aging time, composition, and relative humidity. 29Si nuclear magnetic resonance (NMR) spectroscopy and solution-phase small-angle X-ray scattering (SAXS) of the aged coating solutions presented in part I of this series are then used to interpret the effects of aging prior to dip-coating. Specifically, it was found that a predictive model based on volume fractions and the silica cluster stoichiometry obtained from 29Si NMR qualitatively explains the trends observed with composition and aging. However, apart from the effects of relative humidity, a quantitative comparison of the predicted phase with the experimental processing diagram suggests that less-condensed silica clusters are more effective at swelling the EO blocks at early aging times. This enhanced swelling decreases with aging time and results in lower-curvature nanostructures such as the double-gyroid. The decrease in swelling is attributed to the decreased thermodynamic driving force for the more-condensed silica clusters to mix with the EO block of the surfactant.     

Efficient hydrogen-evolving cathodes based on proton and electron reservoir behaviors of the phosphotungstate [H7P8W48O184](33-) and the Co(II)-Containing Silicotungstates [Co(6)H2O)(30){Co(9)Cl(2)(OH)(3)(H(2)O)(9)(beta-SiW(8)O(31))(3)}](5-) and [{Co(3)(B-beta-SiW(9)O(33)(OH))(B-beta-SiW(8)O(29)OH)(2)}(2)](22-)

Original and simple procedures for glassy carbon electrode modification with polyoxometalates (POMs), phosphotungstate [H7P8W48O184]33-, and Co(II)-containing silicotungstates [Co6(H2O)30{Co9Cl2(OH)3(H2O)9(beta-SiW8O31)3}]5- and [{Co3(B-beta-SiW9O33(OH))(B-beta-SiW8O29OH)2}2]22- give stable and very active surfaces for the hydrogen-evolution reaction (HER). For this purpose, the selected POMs fixed on Vulcan XC-72 were adsorbed on the electrode surface or were directly entrapped in polyvinylpyridine films on the electrode. Cyclic voltammetry and confocal microscopy results converge to indicate that the activation is related to the proton and electron reservoir-like behaviors of these molecular oxides and not to any electrode surface area increase. However, the Tafel parameters of the HER process, which are different from one POM to the next, are in the range of those of the best metallic electrodes.     

Influence of water in the lamellar rearrangement of internal wool lipids

Small angle X-ray scattering (SAXS) was applied to a new lipid model arrangement, which was achieved by concentrating or diluting internal wool lipid liposome suspensions in varying water concentrations. The influence of the water content in the lamellar structure of the internal wool lipids is compared with the lamellar structure of phosphatidylcholine bilayers present in the membranes of the living cells. The high increase in the lamellar distances with the water content indicates that large amounts of water can be retained in the lipid wool membrane in contrast to the case of phosphatidylcholine liposomes. A transition temperature between 40 and 50 degrees C tends to eliminate the ordered lamellar structure when more than 60% of water is present in the bilayer structure. This could account for the increase in the permeability of the wool fibres when these are soaked in water at temperatures exceeding 40 degrees C.     

New diterpenoids from Calceolaria polifolia

Four new and seven known diterpenes have been isolated from the dichloromethane extract of the aerial parts of Calceolaria polifolia. The structures of the new compounds were established by spectroscopic evidence.     

Pharmaceuticals and Their Main Metabolites in Treated Sewage Sludge and Sludge-Amended Soil: Availability and Sorption Behaviour

This work evaluated the availability and sorption behaviour of four pharmaceuticals and eight of their metabolites in sewage sludge and sludge-amended soil. Digested sludge and compost were evaluated. The highest levels found in digested sludge corresponded to caffeine (up to 115 ng g⁻¹ dm), ibuprofen (45 ng g⁻¹ dm) and carbamazepine (9.3 ng g⁻¹ dm). The concentrations measured in compost were even lower than in digested sludge. No compound was detected in sludge-amended soils. This fact could be due to the dilution effect after sludge application to soil. Different adsorption capacities in sludge–soil mixtures were measured for the studied compounds at the same spike concentration. In general, except for paraxanthine and 3-hydroxycarbamazepine, the metabolite concentrations measured in the mixtures were almost two-fold lower than those of their parent compounds, which can be explained by their mobility and lixiviation tendency. The log K_d ranged from −1.55 to 1.71 in sludge samples and from −0.29 to 1.18 in soil–sludge mixtures. The log K_d values calculated for compost were higher than those calculated for digested sludge. The obtained results implied that the higher organic carbon content of compost could influence soil contamination when it is applied to soil.     

Electrochemical and electron spin resonance studies of selected benzazolo[3,2-a]quinolinium salts

The electrochemical reduction of the chloride or perchlorate salts of benzazolo[3,2-a]quinolinium ion and several of its analogues is reported. The compounds studied are the perchlorate salt of 3-nitrobenzothiazolo-and 3-nitro-9-methoxybenzothiazolo[3,2-a]quinolinium, and the chloride salts of 7-ethyl-, 3-nitro-7-methyl-, 3-nitro-7-ethyl-, 3-nitro-7-isopropyl-, 3-nitro-7-butyl- and 3-nitro-7-benzylbenzimidazolo[3,2-a]-quinolinium, respectively. Cyclic voltammetry of the corresponding 3-nitrobenzothiazolo[3,2-a]quinolinium derivatives in N,N-dimethylformamide shows an irreversible peak potential at -0.6 and a quasi-reversible peak at -(1.2–1.3) volts, respectively, relative to the standard calomel electrode. In contrast, the corresponding 3-nitrobenzimidazolo[3,2-a]quinolinium derivatives show, in general, reversible peaks at near -0.8 and -(1.2–1.4) volts, respectively. Upon electrolytic reduction, only the nitro-substituted derivatives produced observable electron paramagnetic resonance electron spin resonance spectra. This observation is explained in terms of the stabilization of the radicals produced by the nitro group. Theoretical MM+/AM1/UHF calculations support the idea that the larger nitrogen splitting is caused by N-12 and the minor splittings by N-7 in the benzimidazolo[3,2-a]quinolinium ion series.     

Darboux transformations for Lamé potentials

Irreducible second order Darboux (SUSY) transformations are applied to Lam periodic Hamiltonians in order to find physically acceptable partner potentials with the same band structure. The main differences with the usual SUSY approach of potentials allowing for a discrete spectrum are pointed out. Presented at the 9th Colloquium “Quantum Groups and Integrable Systems”, Prague, 22–24 June 2000. This work has been partially supported by CONACyT (project 32086-E) Mxico, DGES (PB98-0370) from MEC (Spain), Junta de Castilla y Len (CO2/199), and Universidad de Valladolid.     

Optimization of quantized diffractive elements with symmetry constraints

We employ the simulated annealing algorithm to optimize totally quantized Fourier diffractive elements, whose phase modulation is constrained by a symmetry similar to that of the desired diffraction pattern. Elements optimized under this restriction, show better performance than the conventionally optimized ones, for which the object phase function is randomly modified. In addition, the elements constrained by spatial symmetry are optimized with relatively low computational efforts.     

Closed‐form formulas for Kirchhoff index

We find closed‐form expressions for the resistance, or Kirchhoff index, of certain connected graphs using Foster's theorems, random walks, and the superposition principle. © 2001 John Wiley & Sons, Inc. Int J Quant Chem 81: 135–140, 2001