A simple polymer electrolyte membrane system for enrichment of low-level tritium (3H) in environmental water samples

Tritium (³H) is an essential tracer of the Earth's water cycle; yet widespread adoption of tritium in hydrologic studies remains a challenge because of analytical barriers to quantification and detection of ³H by electrolytic pre-concentration. Here, we propose a simple tritium electrolytic enrichment system based on the use of solid polymer electrolyte membranes (PEMs) that can be used to enrich ³H in 250–3000?mL environmental water samples to a 10-mL final volume. The IAEA PEM-³H system reported here can produce high enrichment factors (>70-fold) and, importantly, removes some of the deterrents to conventional ³H enrichments methods, including the use of toxic electrolysis and neutralization chemicals, spike standards, a complex electrolysis apparatus that requires extensive cooling and temperature controls, and improves precision by eliminating the need for tracking recovery gravimetrics. Preliminary results with varying operating conditions show ³H enrichments to 70-fold and higher are feasible, spanning a wide range of tritium activities from 5 to 150 TU with a precision of ～4.5?%. Further work is needed to quantify inter-sample memory and to establish lower ³H detection limits. The IAEA PEM-³H system is open source, with 3-D CAD and design files made freely available for adoption and improvement by others.     

Simplification and analysis of a model of social interaction in voting

A recently proposed model of social interaction in voting is investigated by simplifyingit down into a version that is more analytically tractable and which allows a mathematicalanalysis to be performed. This analysis clarifies the interplay of the different elementspresent in the system – social influence, heterogeneity and noise – and leads to a betterunderstanding of its properties. The origin of a regime of bistability is identified. Theinsight gained in this way gives further intuition into the behaviour of the originalmodel.     

Comment on ‘Ab initio study: the potential energy curves and rovibrational spectrum of low-lying excited states of HCl+ cation’ (Molecular Physics, 114:19, 2817–2823)

In a recent article, Y. Liu, X. Cheng, H. Cheng, J. Cheng and X. Song [Mol. Phys., 114:19, 2817–2823] report on the calculation of potential energy curves and the derivation of spectroscopic constants and line intensities for the lowest energy electronic states of HCl⁺. There are several shortcomings in the article; the most notable being the incorrect ordering of the ²П_3/2 and ²П_1/2 state energies, erroneous selection rules, which lead to the absence of a Q-branch in their predicted spectra, incorrect Höln–London factors, and a missing appendix.     

Specific activity and derived intervention levels for Cesium-137 in Costa Rican export goods: Tuna fish, coffee and powdered milk

Cesium-137 is a fission product of ²³⁵U and ²³⁹Pu. After a major nuclear accident, it is released into the atmosphere and in the far field region it will produce radioactively contaminated food and drinking water. This paper will study the specific activity of ¹³⁷Cs in three Costa Rican export products: tuna fish, coffee and powdered milk. The average specific activities found are as follows: 0.89±0.41, 1.16±0.76 and 4.53±2.00 Bq kg⁻¹. They represent low values compared to their derived intervention levels: 1.25 × 10⁷, 1.25 × 10⁷ and 2.44 × 10⁵ Bq kg⁻¹, respectively.     

On the impact of large amplitude pairing fluctuations on nuclear spectra

The influence of large amplitude pairing fluctuations is investigated in the framework of beyond mean field symmetry conserving configuration mixing calculations. In the numerical application the finite range density dependent Gogny force is used. We investigate the nucleus ⁵⁴Cr with particle number and angular momentum projected wave functions considering the axial quadrupole deformation and the pairing gap degree of freedom as generator coordinates. We find that the effects of the pairing fluctuations increase with the excitation energy and the angular momentum. The self-consistency in the determination of the basis states plays an important role.     

All nonclassical correlations can be activated into distillable entanglement

We devise a protocol in which general nonclassical multipartite correlations produce a physically relevant effect, leading to the creation of bipartite entanglement. In particular, we show that the relative entropy of quantumness, which measures all nonclassical correlations among subsystems of a quantum system, is equivalent to and can be operationally interpreted as the minimum distillable entanglement generated between the system and local ancillae in our protocol. We emphasize the key role of state mixedness in maximizing nonclassicality: Mixed entangled states can be arbitrarily more nonclassical than separable and pure entangled states.     

Analysing the sintering of heterogeneous powder structures by in situ microtomography

This work analyses the microstructure changes of various copper-based powder systems during sintering from 3D images provided by in situ synchrotron microtomography. The investigated systems include a copper powder with a wide particle size distribution of 0–63 µm poured into a quartz capillary, a pre-sintered copper compact with artificially created large pores and a mixture of copper and alumina particles. The experiments were carried out at the European Synchrotron in Grenoble, France. Powders were sintered up to 1060°C under reducing atmosphere in a furnace located between the X-ray source and the detector. During each experiment, 3D images were taken at various times of the thermal cycle. We have obtained images with a resolution of 1.5 µm and the time of acquisition of every image was ～1 min. Quantitative analysis of these images allowed the changes of various important parameters to be followed. Such parameters characterise the sintering process at the particle length scale: interparticle coordination, pore size distribution and particle centre-to-centre distance. Moreover, by tracking the displacement of each particle centre and comparing it to the displacement predicted by classical mean field assumption, we have been able to assess the magnitude of particle rearrangement occurring during sintering. From these data, the sintering behaviour of heterogeneous powder systems is discussed with particular emphasis of collective particle phenomena.     

On Hexagonal Structures in Higher Dimensional Theories

We analyze the geometrical background under which many Lie groups relevant to particle physics are endowed with a (possibly multiple) hexagonal structure. There are several groups appearing, either as special holonomy groups on the compactification process from higher dimensions, or as dynamical string gauge groups; this includes groups like SU(2), SU(3), G ₂, Spin(7), O(8) as well as E ₈ and O(32). We emphasize also the relation of these hexagonal structures with the octonion division algebra, as we expect as well eventually some role for octonions in the interpretation of symmetries in High Energy Physics.     

Cosmological models in the scalar-tetradic theory B

We present two methods for solving the cosmological equations of the scalar-tetradic theory B [19] when a Friedmann-Robertson-Walker (FRW) geometry is assumed. Among the many solutions found there are several physically meaningful ones including inflationary universe solutions.