In situ disorder-order transformation in synthetic gallosilicate zeolites with the NAT topology

Here, we report that synthetic gallosilicate molecular sieves with the NAT topology and Si/Ga ratios close to but slightly higher than 1.50 undergo an in situ transformation under their crystallization conditions. The materials have been studied ex situ by using powder X-ray diffraction, elemental and thermal analyses, and multinuclear MAS NMR. The transformation is characterized by a change in the distribution of Si and Ga of the NAT framework, from a quite (but not completely) disordered phase to a very highly (but not completely) ordered one, accompanied by a change from tetragonal to orthorhombic symmetry. During most of the solution-mediated transformation, no noticeable signs of fresh precipitation, phase segregation, or changes in the chemical composition are detected. Intermediate materials show variations in the degree of Si-Ga ordering and orthorhombic distortion and are not physical mixtures of the disordered and ordered phases. Ab initio calculations strongly suggest a preferential siting of Si in the tetrahedral sites involved in a smaller number of 4-rings in the NAT topology (i.e., the low multiplicity site). The cost of violations of Loewenstein's rule has also been calculated. For this topology and chemical composition the preferential siting and Loewenstein's rule drive together the system to the ordered configuration. A Monte Carlo sampling procedure affords a reasonable model for the initial, mainly disordered state, which fits well within the experimental disorder-order series.     

Towards an understanding of the heat capacity of liquids. A simple two-state model for molecular association

A model for the temperature dependence of the isobaric heat capacity of associated pure liquids C(p,m)(o)(T) is proposed. Taking the ideal gas as a reference state, the residual heat capacity is divided into nonspecific C(p) (res,ns) and associational C(p) (res,ass) contributions. Statistical mechanics is used to obtain C(p)(res,ass) by means of a two-state model. All the experimentally observed C(p,m)(o)(T) types of curves in the literature are qualitatively described from the combination of the ideal gas heat capacity C(p)(id)(T) and C(p)(res,ass)(T). The existence of C(p,m)(o)(T) curves with a maximum is predicted and experimentally observed, for the first time, through the measurement of C(p,m)(o)(T) for highly sterically hindered alcohols. A detailed quantitative analysis of C(p,m)(o)(T) for several series of substances (n-alkanes, linear and branched alcohols, and thiols) is made. All the basic features of C(p,m)(o)(T) at atmospheric and high pressures are successfully described, the model parameters being physically meaningful. In particular, the molecular association energies and the C(p)(res,ns) values from the proposed model are found to be in agreement with those obtained through quantum mechanical ab initio calculations and the Flory model, respectively. It is concluded that C(p,m)(o)(T) is governed by the association energy between molecules, their self-association capability and molecular size.     

Flexible ureasil hybrids with tailored optical properties through doping with metal nanoparticles

Hybrid organic-inorganic nanocomposites containing uniform distributions of metal nanoparticles have been prepared by mixing a preformed nanoparticle colloid with the precursors of a ureasil, prior to the sol-gel transition. These nanocomposites possess not only high optical quality and optical features dictated by the size and shape of the nanoparticle dopants but also a high degree of flexibility, which can largely enhance the range of applications in practical devices. The deposition of a uniform silica shell on the nanoparticle surface prior to the sol-gel transition was found to be required to maintain the colloidal stability during the process and, thus, to retain the optical properties in the final nanocomposite material. This method can be readily extended to other materials, such as semiconductor and magnetic nanoparticles.     

The Keto–Enol Tautomerism of Biliverdin in Bacteriophytochrome: Could it Explain the Bathochromic Shift in the Pfr Form?†

Phytochromes are ubiquitous photoreceptors found in plants, eukaryotic algae, bacteria and fungi. Particularly, when bacteriophytochrome is irradiated with light, a Z‐to‐E (photo)isomerization takes place in the biliverdin chromophore as part of the Pr‐to‐Pfr conversion. This photoisomerization is concomitant with a bathochromic shift in the Q‐band. Based on experimental evidence, we studied a possible keto–enol tautomerization of BV, as an alternative reaction channel after its photoisomerization. In this contribution, the noncatalyzed and water‐assisted reaction pathways for the lactam–lactim interconversion through consecutive keto–enol tautomerization of a model BV species were studied deeply. It was found that in the absence of water molecules, the proton transfer reaction is unable to take place at normal conditions, due to large activation energies, and the endothermic formation of lactim derivatives prevents its occurrence. However, when a water molecule assists the process by catalyzing the proton transfer reaction, the activation free energy lowers considerably. The drastic lowering in the activation energy for the keto–enol tautomerism is due to the stabilization of the water moiety through hydrogen bonds along the reaction coordinate. The absorption spectra were computed for all tautomers. It was found that the UV–visible absorption bands are in reasonable agreement with the experimental data. Our results suggest that although the keto–enol equilibrium is likely favoring the lactam tautomer, the equilibrium could eventually be shifted in favor of the lactim, as it has been reported to occur in the dark reversion mechanism of bathy phytochromes.     

Determining concentration depth profiles in fluorinated networks by means of electric force microscopy

By means of electric force microscopy, composition depth profiles were measured with nanometric resolution for a series of fluorinated networks. By mapping the dielectric permittivity along a line going from the surface to the bulk, we were able to experimentally access to the fluorine concentration profile. Obtained data show composition gradient lengths ranging from 30 nm to 80 nm in the near surface area for samples containing from 0.5 to 5 wt. % F, respectively. In contrast, no gradients of concentration were detected in bulk. This method has several advantages over other techniques because it allows profiling directly on a sectional cut of the sample. By combining the obtained results with x-ray photoelectron spectroscopy measurements, we were also able to quantify F/C ratio as a function of depth with nanoscale resolution.     

Charge carrier mobility and concentration as a function of composition in AgPO3-AgI glasses

Conductivity data of the xAgI(1 - x)AgPO(3) system (0 ≤ x ≤ 0.5) were collected in the liquid and glassy states. The difference in the dependence of ionic conductivity on temperature below and above their glass transition temperatures (T(g)) is interpreted by a discontinuity in the charge carrier's mobility mechanisms. Charge carrier displacement occurs through an activated mechanism below T(g) and through a Vogel-Fulcher-Tammann-Hesse mechanism above this temperature. Fitting conductivity data with the proposed model allows one to determine separately the enthalpies of charge carrier formation and migration. For the five investigated compositions, the enthalpy of charge carrier formation is found to decrease, with x, from 0.86 to 0.2 eV, while the migration enthalpy remains constant at ≈0.14 eV. Based on these values, the charge carrier mobility and concentration in the glassy state can then be calculated. Mobility values at room temperature (≈10(-4) cm(2) V(-1) s(-1)) do not vary significantly with the AgI content and are in good agreement with those previously measured by the Hall-effect technique. The observed increase in ionic conductivity with x would thus only be due to an increase in the effective charge carrier concentration. Considering AgI as a weak electrolyte, the change in the effective charge carrier concentration is justified and is correlated to the partial free energy of silver iodide forming a regular solution with AgPO(3).     

Rational design of a Tn antigen mimic

A novel Tn antigen mimic, in which the natural underlying amino acid has been replaced by the non-natural α-methylserine analogue, is reported. This derivative exhibits a similar affinity for a natural lectin as for the natural Tn and retains the bioactive conformation observed in the Tn-containing glycopeptides with anti-MUC1 antibodies.     

Effects of temperature and anion type on the two-dimensional condensation of the 4,4′-bipyridine cation radical on mercury

The reduction of 4,4′-bipyridine (BPH²⁺₂) on mercury in an acid medium gives a very narrow sharp tail-less reversible voltammetric peak that can be ascribed to the formation of a two-dimensional (2D) phase of the cation radical BPH^·+₂ at the electrode according to the reaction

BPH²⁺₂ + e⁻ |BPH^·+₂|_2D

The corresponding oxidation peak possesses similar properties and arises from the destruction (fusion) of the 2D phase.In this work we studied the influence of some experimental variables, namely the type of anion present in the medium, the concentration of 4,4′-bipyridine and temperature on the 2D phase transition peaks. Also, we tested various analytical criteria to validate this assignation and fitted both voltammetric peaks numerically to the theoretical model developed for this purpose.     

The artemisia L. Genus: a review of bioactive essential oils

Numerous members of the Anthemideae tribe are important as cut flowers and ornamental crops, as well as being medicinal and aromatic plants, many of which produce essential oils used in folk and modern medicine and in the cosmetics and pharmaceutical industry. Essential oils generally have a broad spectrum of bioactivity, owing to the presence of several active ingredients that work through various modes of action. Due to their mode of extraction, mostly by distillation from aromatic plants, they contain a variety of volatile molecules such as terpenes, phenol-derived aromatic and aliphatic components. The large genus Artemisia L., from the tribe Anthemideae, comprises important medicinal plants which are currently the subject of phytochemical attention due to their biological and chemical diversity. Artemisia species, widespread throughout the world, are one of the most popular plants in Chinese traditional preparations and are frequently used for the treatment of diseases such as malaria, hepatitis, cancer, inflammation and infections by fungi, bacteria and viruses. Extensive studies of the chemical components of Artemisia have led to the identification of many compounds as well as essentials oils. This review summarizes some of the main reports on the chemistry and anti-infective activities of Artemisia. Li. essential oils from the data in the recent literature (2000-2011).