L X-ray production cross sections, average L shell fluorescence yield and intensity ratios in heavy elements

L X-ray fluorescence cross sections, and intensity ratios were measured for elements in the 70￡Z￡92 atomic range at the excitation energy 59.5 keV using a Si(Li) detector. Furthermore, L X-ray fluorescence cross sections and intensity ratios were calculated for elements in the same range. The average L shell fluorescence yields were derived using experimental L X-ray fluorescence cross sections and theoretical photoionization cross sections. The obtained results were compared with other experimental and theoretical values. This revised version was published online in August 2006 with corrections to the Cover Date.     

Influence of biomass on hydrodynamics of an internal loop airlift reactor

The effect of the biomass presence on the overall circulation velocity, the linear velocities both in the riser and the downcomer and the overall gas hold-up was studied in a three-phase internal loop airlift reactor (ILALR). The measured data were compared with those obtained using a two-phase system (air—water). All experiments were carried out in a 40 dm³ ILALR at six different biomass concentrations (ranging from 0 g dm⁻³ to 7.5 g dm⁻³), at a temperature of 30°C, under atmospheric pressure. Air and water were used as the gas and liquid model media, respectively. Pellets of Aspergillus niger produced during the fermentation of glucose to gluconic acid in the ILALR were considered solid phase. In addition, liquid velocities were measured during the fermentation of glucose to gluconic acid using Aspergillus niger. All measurements were performed in a bubble circulation regime. At given experimental conditions the effect of the biomass on the circulation velocities in the ILALR was negligible. However, increasing of the biomass concentration led to lower values of the total gas hold-up. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

Selective hydrogenations of steroids catalyzed by heterogenized Ru complexes

Summary [RuCl₂(PPh₃)₃], [{RuCl₂(TPPMS)₂}₂] and their heterogenized analogs were applied in the selective hydrogenation of 17-keto- and α,β-unsaturated ketosteroids. In basic conditions these complexes selectively hydrogenated the C=O bonds, similarly to the results obtained in the case of α,β-unsaturated aldehydes. A new method was developed for the synthesis of an expensive steroid alcohol, which can be prepared traditionally in a more complicated way.     

Particle-size analysis of latexes by classical and small-angle spectrodissymmetry

The spectral dependence of classical and small-angle dissymmetryZ in polydispersions containing spherical particles with lognormal distribution was theoretically studied. It has been found, for instance, for polystyrene latex that small-angle dissymmetry may be used for determining the distribution parameters in systems with particle medial radius 60–700 nm on the basis of measurements ofZ (10°/5°( at two wavelengths of radiation. For particles outside this interval and by use of working relationships of classical dissymmetry only the application of a wide range of wavelengths comes into consideration by distribution analysis.     

Nitrogen bridgehead compounds part 14. Acylation of ethyl 6-methyl-4-oxo- -6,7,8,9-tetrahydro-pyrido(1,2-a)pyrimidine-3-carboxilate with isocyanates

The 9-carbamoyl derivatives /$\text{3}$–$\text{9}$/ can be prepared from title compound /$\text{1}$/ with isocyanates /$\text{2}$/. $\text{3}$–$\text{9}$ are mixtures of the cis /Z/ and trans /E/ imines and the enamine /e/. The equilibrium depends on the substituents R,X and on the solvent.     

Extraction distribution of microamounts of cesium in the two-phase water-HCl-nitrobenzene-dibenzo-18-crown-6-hydrogen dicarbollylcobaltate system

Summary Extraction distribution of microamounts of cesium in the water-HCl-nitrobenzene-dibenzo-18-crown-6(L)-hydrogen dicarbollylcobaltate has been investigated. The equilibrium data have been explained assuming that the complexes HL⁺, CsL⁺and CsL_2,⁺are extracted into the organic phase. The values of extraction and stability constants of the species in nitrobenzene saturated with water have been determined.     

Discontinuous-flow potentiometric determination of chloride in a large-volume wall-jet cell using an ion-selective electrode based on a silver chloride film chemically deposited on a silver iodide support

A robust and sensitive chloride ion-selective electrode can be prepared by modifying the surface of an iodide-selective electrode using the chemical reaction with mercuric chloride in an oxidizing medium containing excess chloride. A thin film of silver chloride is thus formed ensuring a rapid and reproducible response to chloride. The analytical parameters of this electrode are similar to those of commercial silver chloride ion-selective electrodes, but its electrical impedance and signal noise are substantially lower and the response somewhat faster. Its sensitivity toward surfactants is somewhat suppressed. The electrode was used for discontinuous flow potentiometric (DFP) determinations in a large-volume wall-jet cell in which the electrode surface can be continuously reactivated by a cleaning solution contained in the cell. The method was applied to determination of chloride in ground waters from an industrial waste dumping site. The limit of determination is low 9 mug Cl(-)/l (2.6 x 10(-7)M), the precision good (the relative standard deviation varies from 0.6 to 3.0% for chloride contents from 2.90 to 0.15 mg/l, respectively) and the method correlates satisfactorily with the results of an indirect AAS determination of chloride. The sample throughput is high-90 measurements can be carried out per hour, corresponding to 30-40 determinations per hour.     

Preparation of a mercury film electrode modified by tri-n-octylphosphine oxide and the electrochemical properties of this electrode

Mercury film electrodes have been prepared on silver metal and silver-coated glassy-carbon supports and have been modified by a film of tri-n-octylphosphine oxide (TOPO) in a poly(vinyl chloride) matrix. The electrodes have been characterized in detail and the effects of the modifying film parameters on their electrochemical properties have been studied. It has been shown that these electrodes permit selective and sensitive determinations of many metals. The most important parameters are the thickness of the modifying film, the modifier-to-matrix ratio in the modifying film and the base electrolyte composition. Data concerning the reactions of a number of metal ions on the modified electrode are given.     

Topographical properties of polymer films deposited in capillaries for electrophoretic separations of large organic molecules

Topography and thickness of hydrophilic polymer coatings of fused-silica capillaries for capillary electrophoresis (CE) were investigated using atomic force microscopy (AFM), scanning electron microscopy (SEM), and profilometry. Three hydrogels, poly(2-hydroxyethyl methacrylate) [poly(HEMA)], poly(diethylene glycol monomethacrylate) [poly(DEGMA)], and poly(triethylene glycol monomethacrylate) [poly(TEGMA)], were deposited using two procedures, either by simple physical sorption of the polymers, or by derivatization of the capillary wall surface with glycidyl methacrylate (EPMA) followed by polymerization of the appropriate monomers. The performance of the modified capillaries was tested under CE conditions (decrease in the electroosmotic flow, EOF dependence on pH, separation of milk and standard proteins). It has been found that the most important property of the polymer coating is its thickness, whereas its topography and the degree of its hydrophobicity are less significant. Film deposition by physical adsorption is preferable to polymerization on the derivatized surface.