An electrochemical study of redox indicators : Part I. Substituted chrysoidines

The electrochemical oxidation of various substituted chrysoidines was studied by cyclic voltammetry, to determine which have stable oxidation products. Only 4-hydroxy-chrysoidine has a stable product; the apparent oxidation potential is 0.779 V vs. NHE. 4-Methoxy- and 4-ethoxy-chrysoidine rapidly lose methanol or ethanol, respectively, so that the 4-hydroxychrysoidine wave appears on subsequent scans. All the other chrysoidines studied are irreversible. The results indicate that a hydroxy group in the 4-position is necessary for stability; the 4-alkoxychrysoidines can achieve the stable quinoidal structure by cleavage of the alkoxy group after nucleophilic attack.     

A new spot test for cerium(IV)

Summary A new colour reaction for the detection of cerram(IV) which can be carried out both in a test tube and on a spot plate has been described. The test solution is treated with methylene blue in nitric acid solution (11) to form a rose-red colour. This simple procedure has an advantage over the existing tests in that it is applicable in the presence of oxidising agents like chromium(VI), vanadium(V), nitrate, perchlorate and of coloured ions like copper(II), cobalt(II), nickel(II), chromium(III), iron(III), vanadium(IV), uranium(VI).

---

Zusammenfassung Eine neue, sowohl in der Eprouvette wie auf der Tüpfelplatte ausführbare Farbreaktion zum Nachweis von Cer(IV) wurde angegeben. Die Probelösung wird mit salpetersaurer Methylenblaulösung behandelt und gibt eine rosarote Färbung. Die Reaktion hat gegenüber bekannten Tests den Vorteil, in Gegenwart von Oxydationsmitteln wie Cr(VI), V(V), NO₃ ^–, ClO₄ ^– bzw. in Anwesenheit gefärbter Ionen wie Cu(II), Co(II), Ni(II), Cr(III), Fe(III), V(IV) oder U(VI) anwendbar zu sein.

     

Production of new lagochilin derivatives

The tetrahydric alcohol Lgochilin belongs to the 9,13-epoxylabdane series of diterpenoids. It is produced by many species of plants of the Lagochilus genus and can be used as the starting material for the synthesis of new compounds with a broad spectrum of physiological action [1, 2]. Many lagochilin derivatives possess hemostatic (3, 4) and antiviral properties. Lagochilin derivatives with aromatic hydroxaldehydes and naphthaldehydes have been synthesized, and the cytotoxic effects of the compounds synthesized in cell cultures have been studied.Tashkent State University, (fax (3712) 46 24. 42. Translated from Khimiya Prirodnykh Soedinenii, No. 1, pp. 86–88, January–February, 1995. Original article submitted October 17, 1994.     

Comparison of the structural and chemical composition of giant T-even phage heads.

A study has been made of the structure of the capsids of T4D giant phage produced from mutants in gene 23 and temperature-sensitive mutants in gene 24, and T4D and T2L giant phage formed by the addition of L-canavanine followed by an Larginine chase in the growth medium. All the giant phage capsids have been shown to be built according to the same geometrical architecture. This consists of a near-hexagonal surface net, lattice constant 129.5 A, folded into a left-handed T = 13 prolate icosahedron elongated along one of its fivefold symmetry axes. Their only apparent difference from wild-type T-even phage capsids is their abnormally elongated tubular part. A comparison of the capsomere morphologies and protein compositions of the giant phage capsids showed that all T4D giants are identical but differ from T2L: The T4D capsomere has a complex (6 + 6 + 1)-type morphology, whereas the T2L has a simple 6-type. T2L phage, however, lack two capsid proteins, "soc" and "hoc", present in T4D. The difference in capsomere morphology can therefore be related to the difference in the protein compositions of these two phage. Possible differences between the initiation and means of length regulation of giant phage heads and the aberrant polyheads are discussed.     

Die Bildungsenthalpien einiger Siliciumtetrahalogenid—Pyridin-Addukte

The enthalpies of formation of the addition compounds F₄Si(py)₂, Cl₄Si(py)₂, Br₄Si(py)₂ and I₄Si(py)₄ have been measured calorimetrically by two different ways (see table 1). It was not possible to confirm enthalpy data published in^{7, 8}. The sequence SiF₄4～SiBr₄>SiI₄(?) is proposed for the acceptor power of the silicon tetrahalides towards pyridine.     

Photophysical behaviour of azaphenanthrenes

Nitrogen position and internal heavy atom effects on the radiative and radiationless transitions from the lowest excited states of the isomeric azaphenanthrenes and some of their methyl, chlorine and bromine derivatives have been studied in E.P.A. solutions at 77 K. The nitrogen position affects the fluorescence and S₁-T₁ intersystem crossing rates more than the phosphorescence and T₁-S₀ intersystem crossing rates. Small differences in the behaviour of 9-azaphenanthrene are enhanced in non-hydroxylic solvents and at room temperature, and it is inferred that (n, π*) states play a more important role in the photophysical behaviour of this isomer. Halogen, substitution in all the isomers increases the phosphorescence rate, induces a smaller increase in the T₁-S₀ intersystem crossing rates and has a negligible effect on the fluorescence rate.     

Lifetime measurements of two-photon excited vibronic levels in the low pressure limit: naphthalene

Single vibronic lifetimes of two-photon excited states are measured in the low pressure limit for naphthalene. The two-photon spectrum, besides yielding new states in S₁, is also free of the interference from the neighborhood of the S₂, known from one-photon experiments, and hence unperturbed lifetimes can be measured to higher excess energies. The overall pattern of lifetimes with excess energy including both one-photon and two-photon states shows that the vibronic structure is subordinate to an overall monotonic decrease, much as found earlier for β-naphthylamine. This indicates, at least for naphthalene, that radiationless processes into triplets are dominated by Franck—Condon factors and not by vibronic inductions and promoting modes.     

Influence of Jahn-Teller coupling on the magnetic properties of transition metal complexes with orbital triplet ground terms: magnetization and electronic Raman studies of the titanium(III) hexa-aqua cation

Magnetization and electronic Raman data are presented for salts of the type Cs[Ga:Ti](SO(4))(2) x 12H(2)O, which enable a very precise definition of the electronic structure of the [Ti(OH(2))(6)](3+) cation. The magnetization data exhibit a spectacular deviation from Brillouin behavior, with the magnetic moment highly dependent on the strength of the applied field at a given ratio of B/T. This arises from unprecedented higher-order contributions to the magnetization, and these measurements afford the determination of the ground-state Zeeman coefficients to third-order. The anomalous magnetic behavior is a manifestation of Jahn-Teller coupling, giving rise to low-lying vibronic states, which mix into the ground state through the magnetic field. Electronic Raman measurements of the 1%-titanium(III)-doped sample identify the first vibronic excitation at approximately 18 cm(-1), which betokens a substantial quenching of spin-orbit coupling by the vibronic interaction. The ground-state Zeeman coefficients are strongly dependent on the concentration of titanium(III) in the crystals, and this can be modeled as a function of one parameter, representing the degree of strain induced by the cooperative Jahn-Teller effect. This study clearly demonstrates the importance that the Jahn-Teller effect can have in governing the magnetic properties of transition metal complexes with orbital triplet ground terms.     

Ligand exchange reactions with η6-arene-η5-cyclopentadienyliron cations under thermal or photochemical conditions

Reactions of various η⁶-arene-η⁵-cyclopentadienyliron or substituted cyclopentadienyliron cations with trimethyl, triethyl or triphenyl phosphite under either thermal or photochemical conditions all resulted in the replacement of the arene ligand with three phosphite ligands to give η⁵-tris(trimethyl, triethyl or triphenyl phosphite)-η⁵-cyclopentadienyliron or substituted cyclopentadienyliron cations. The yields of the phosphite complexes were higher from photolysis than from the analogous thermolysis. Photolysis of the η⁶-chlorobenzene-η⁵-cyclopentadienyliron cation (IX) carried out in the presence of a more basic or more electron-rich aromatic ligand resulted in the exchange of the chlorobenzene of IX with the more basic arene, thus providing synthetic routes to cyclopentadienyliron complexes that may be difficult to prepare by other means. New complexes synthesized in this way are the η⁶-2-phenylethyl tosylate-η⁵-cyclopentadienyliron cation and the CpFe⁺ complexes of thiophene, 2-methylthiophene, 3-methylthiophene and 2,5-dimethylthiophene.     

Hydrophilic polymer membranes containing carboxylic groups—I. Acrylic acid—methyl methacrylate—glycidyl methacrylate copolymers

Copolymers of acrylic acid, methyl methacrylate and glycidyl methacrylate have been synthesized and converted into cross-linked hydrophilic membranes by successive treatments with heat, alkali solution and acidic solution. The copolymerization was carried out in solution using tetrahydrofuran and p-dioxane as solvents. The polymer was obtained as a clear viscous solution at yields of approximately 95%. The polymerization was stopped before gelation took place. This gelation resulted from the reaction of epoxy and carboxylic groups of the polymeric chain. The polymerization time ranged from 3.5 to 7 hr depending on the content of the glycidyl methacrylate in the feed. The monomer mixture consisted of 25–45 mol% of acrylic acid, 40–70 mol% of methyl methacrylate and 2.5–15 mol% of glycīdyl methacrylate. With increasing content of acrylic acid, the membranes became soft and elastic; with decreasing content, they became brittle and hydrophobic. The swelling of the cured polymeric film increased with increase in the acrylic acid content of the monomer mixture and decreased with increasing glycidyl methacrylate content. Dialysis runs were conducted with sodium chloride, urea and a series of ethylene glycols with molecular weights up to 600. The permeability coefficients through the membranes for the ethylene glycols were similar to those through a commercial cellulose membrane (Cuprophane). The permeability proportional to $\text{(permeant molecular wt)}{}^{\mathrm{<mtext>?</mtext><mtext>1</mtext><mtext>2</mtext>}}$. The membranes showed very low permeabilities to sodium chloride compared with those of commercial nonionic membranes. This appears to be due to the ionic exclusion mechanisms expected for ion exchange membranes.