Hydrophilic sulfonated bis-1,2,4-triazine ligands are highly effective reagents for separating actinides(iii) from lanthanides(iii) via selective formation of aqueous actinide complexes

We report the first examples of hydrophilic 6,6′-bis(1,2,4-triazin-3-yl)-2,2′-bipyridine (BTBP) and 2,9-bis(1,2,4-triazin-3-yl)-1,10-phenanthroline (BTPhen) ligands, and their applications as actinide(iii) selective aqueous complexing agents. The combination of a hydrophobic diamide ligand in the organic phase and a hydrophilic tetrasulfonated bis-triazine ligand in the aqueous phase is able to separate Am(iii) from Eu(iii) by selective Am(iii) complex formation across a range of nitric acid concentrations with very high selectivities, and without the use of buffers. In contrast, disulfonated bis-triazine ligands are unable to separate Am(iii) from Eu(iii) in this system. The greater ability of the tetrasulfonated ligands to retain Am(iii) selectively in the aqueous phase than the corresponding disulfonated ligands appears to be due to the higher aqueous solubilities of the complexes of the tetrasulfonated ligands with Am(iii). The selectivities for Am(iii) complexation observed with hydrophilic tetrasulfonated bis-triazine ligands are in many cases far higher than those found with the polyaminocarboxylate ligands previously used as actinide-selective complexing agents, and are comparable to those found with the parent hydrophobic bis-triazine ligands. Thus we demonstrate a feasible alternative method to separate actinides from lanthanides than the widely studied approach of selective actinide extraction with hydrophobic bis-1,2,4-triazine ligands such as CyMe₄-BTBP and CyMe₄-BTPhen.     

High‐throughput workflow for identification of phosphorylated peptides by LC‐MALDI‐TOF/TOF‐MS coupled to in situ enrichment on MALDI plates functionalized by ion landing

We report an MS‐based workflow for identification of phosphorylated peptides from trypsinized protein mixtures and cell lysates that is suitable for high‐throughput sample analysis. The workflow is based on an in situ enrichment on matrix‐assisted laser desorption/ionization (MALDI) plates that were functionalized by TiO₂ using automated ion landing apparatus that can operate unsupervised. The MALDI plate can be functionalized by TiO₂ into any array of predefined geometry (here, 96 positions for samples and 24 for mass calibration standards) made compatible with a standard MALDI spotter and coupled with high‐performance liquid chromatography. The in situ MALDI plate enrichment was compared with a standard precolumn‐based separation and achieved comparable or better results than the standard method. The performance of this new workflow was demonstrated on a model mixture of proteins as well as on Jurkat cells lysates. The method showed improved signal‐to‐noise ratio in a single MS spectrum, which resulted in better identification by MS/MS and a subsequent database search. Using the workflow, we also found specific phosphorylations in Jurkat cells that were nonspecifically activated by phorbol 12‐myristate 13‐acetate. These phosphorylations concerned the mitogen‐activated protein kinase/extracellular signal‐regulated kinase signaling pathway and its targets and were in agreement with the current knowledge of this signaling cascade. Control sample of non‐activated cells was devoid of these phosphorylations. Overall, the presented analytical workflow is able to detect dynamic phosphorylation events in minimally processed mammalian cells while using only a short high‐performance liquid chromatography gradient. Copyright © 2015 John Wiley & Sons, Ltd.     

A ditopic calix[6]arene ligand with N-methylimidazole and 1,2,3-triazole substituents: synthesis and coordination with Zn(II) cations

The first member of a new class of ditopic calix[6]arene has been synthesized, which is decorated with three N-methylimidazoles at the small rim and three 1,4-disubstituted-1,2,3-triazoles at the large rim. The coordination of a first Zn(II) cation selectively takes place at the small rim. Addition of a second equivalent results in the complexation of the three triazoles, providing a rare example of 1,2,3-triazole ligands embedded within a supramolecular system.     

The Role of Alkali Cation Intercalates on the Electrochemical Characteristics of Nb2CTX MXene for Energy Storage

The intercalation of cations into layered-structure electrode materials has long been studied in depth for energy storage applications. In particular, Li⁺-, Na⁺-, and K⁺-based cation transport in energy storage devices such as batteries and electrochemical capacitors is closely related to the capacitance behavior. We have exploited different sizes of cations from aqueous salt electrolytes intercalating into a layered Nb₂CT_x electrode in a supercapacitor for the first time. As a result, we have demonstrated that capacitive performance was dependent on cation intercalation behavior. The interlayer spacing expansion of the electrode material can be observed in Li₂SO₄, Na₂SO₄, and K₂SO₄ electrolytes with d-spacing. Additionally, our results showed that the Nb₂CT_x electrode exhibited higher electrochemical performance in the presence of Li₂SO₄ than in that of Na₂SO₄ and K₂SO₄. This is partly because the smaller-sized Li⁺ transports quickly and intercalates between the layers of Nb₂CT_x easily. Poor ion transport in the Na₂SO₄ electrolyte limited the electrode capacitance and presented the lowest electrochemical performance, although the cation radius follows Li⁺>Na⁺>K⁺. Our experimental studies provide direct evidence for the intercalation mechanism of Li⁺, Na⁺, and K⁺ on the 2D layered Nb₂CT_x electrode, which provides a new path for exploring the relationship between intercalated cations and other MXene electrodes.     

Bipolar Electrochemiluminescence Imaging: A Way to Investigate the Passivation of Silicon Surfaces

This work depicts the original combination of electrochemiluminescence (ECL) and bipolar electrochemistry (BPE) to map in real-time the oxidation of silicon in microchannels. We fabricated model silicon-PDMS microfluidic chips, optionally containing a restriction, and monitored the evolution of the surface reactivity using ECL. BPE was used to remotely promote ECL at the silicon surface inside microfluidic channels. The effects of the fluidic design, the applied potential and the resistance of the channel (controlled by the fluidic configuration) on the silicon polarization and oxide formation were investigated. A potential difference down to 6 V was sufficient to induce ECL, which is two orders of magnitude less than in classical BPE configurations. Increasing the resistance of the channel led to an increase in the current passing through the silicon and boosted the intensity of ECL signals. Finally, the possibility of achieving electrochemical reactions at predetermined locations on the microfluidic chip was investigated using a patterning of the silicon oxide surface by etched micrometric squares. This ECL imaging approach opens exciting perspectives for the precise understanding and implementation of electrochemical functionalization on passivating materials. In addition, it may help the development and the design of fully integrated microfluidic biochips paving the way for development of original bioanalytical applications.     

Monitoring of amoxicilline and ceftazidime in the microdialysate of diabetic foot and serum by capillary electrophoresis with contactless conductivity detection

Determination of the broad-spectrum antibiotics amoxicilline (AMX) and ceftazidime (CTZ) in blood serum and microdialysates of the subcutaneous tissue of the lower limbs is performed using CE with contactless conductivity detection (C⁴D). Baseline separation of AMX is achieved in 0.5 M acetic acid as the background electrolyte and separation of CTZ in 3.2 M acetic acid with addition of 13% v/v methanol. The CE-C⁴D determination is performed in a 25 µm capillary with suppression of the EOF using INST-coating on an effective length of 18 cm and the attained migration time is 4.2 min for AMX and 4.4 min for CTZ. The analysis was performed using 20 µl of serum and 15 µl of microdialysate, treated by the addition of acetonitrile in a ratio of 1/3 v/v and the sample is injected into the capillary using the large volume sample stacking technique. The LOQ attained in the microdialysate is 148 ng/ml for AMX and 339 ng/ml for CTZ, and in serum 143 ng/ml for AMX and 318 ng/ml for CTZ. The CE-C⁴D method is employed for monitoring the passage of AMX and CTZ from the blood circulatory system into the subcutaneous tissue at the sites of diabetic ulceration in patients suffering from diabetic foot syndrome and also for measuring the pharmacokinetics following intravenous application of bolus antibiotic doses.     

An efficient approach to azirino and pyrrolo-fused dibenzazepines. Conformations of substituted dibenzo[c,f]pyrrolo[1,2-a]azepines

An effective approach to azepino-fused heterocycles is described. trans-1-Aryl-7,11b-dihydro-1H-azirino[1,2-a]dibenzo[c,f]azepines were synthesised via a domino sequence: isomerization of gem-dichloroaziridine-intramolecular Friedel-Crafts acylation of the tethered benzene ring catalysed by SnCl(4) and subsequent hydride induced intramolecular cyclization. Cycloaddition of dibenzazepinium ylides, generated by heating these aziridines, to activated C[double bond]C, C[triple bond]C dipolarophiles and fullerene C(60), leads to derivatives of dibenzo[c,f]pyrrolo[1,2-a]azepine. The reaction proceeds with complete stereoselectivity via cycloaddition of only W-ylide, which due to the high barrier does not undergo E,Z-isomerization under the reaction conditions. It was found that 2,3,9,13b-tetrahydro-1H-dibenzo[c,f]pyrrolo[1,2-a]azepine systems can exist in conformations of two types depending on the substituents at the pyrrolidine carbons in β-position with respect to nitrogen. Details of cycloaddition reactions and the conformational behavior of cycloadducts were studied by DFT calculations at the B3LYP/6-31G(d) level.     

1,2-diphosphaacenaphthene 1,2-dications: synthetic, stereochemical and computational study of the stabilising role of naphthalene-1,8-diyl backbone

Syntheses and full characterisation data (including single crystal diffraction) of three 1,2‐diphosphonium dicationic species with the naphthalene‐1,8‐diyl (Nap) backbone are reported. The oxidation of Nap[P(NMe₂)₂]₂ with P₂I₄ to its 1,2‐dication was achieved. meso‐ and rac‐forms of “all carbon” 1,2‐diphosphonium dications were obtained in good yields and purity by double alkylation of the parent diphosphine (1,2‐diphenyl‐1,2‐diphosphaacenaphthene) with methyl triflate or trimethyloxonium tetrafluoroborate. Each methylating reagent produces one of the rac‐ or meso‐forms of the dication diastereospecifically. Structural parameters of the new dications are discussed with respect to other phosphorus 1,2‐dications. DFT (B3LYP) computations revealed the significant role of the naphthalene backbone in stabilisation of the dicationic motif and helped to assess the energy cost of the steric clash of a variety of groups attached to the peri‐positions of naphthalene. The synthesis and single crystal X‐ray data of the extremely crowded Nap[P(?Se)(OiPr)₂]₂ are discussed, and are contrasted with the unsuccessful synthesis of Nap(PtBu₂)₂ from NapLi₂ and ClPtBu₂.     

A ferrocenyl‐substituted pseudo­titanocene complex

The title compound, (η⁵‐cyclo­penta­dienyl)[(1,2,3,4,5‐η)‐4‐ferro­cenyl‐1,2,5,6‐tetrakis­(tri­methyl­silyl)­cyclo­hexa‐2,4‐dien‐1‐yl]­titanium(II), [TiFe(C₅H₅)₂(C₂₃H₄₂Si₄)] or [Ti{η⁵‐C₆H₂{Fe­(η⁵‐C₅H₄)(η⁵‐C₅H₅)}{Si(CH₃)₃}₄}(η⁵‐C₅H₅)], possesses two directly linked metallocene units that subtend an angle of 52.9 (1)° (defined by the least‐squares planes of the directly connected π‐ligands) associated with the steric requirements of the bulky tri­methyl­silyl substituents. The cyclo­hexa­dienyl ligand adopts an envelope conformation; the perpendicular distance of its η⁵‐plane to the Ti atom is 1.512 (1) Å.     

Microfluidic robotic device coupled with electrochemical sensor field for handling of paramagnetic micro-particles as a tool for determination of plant mRNA

The expression of genes responsible for the biosynthesis of stress proteins corresponds to the exposition of an organism to abiotic and/or biotic stress. We utilize two types of paramagnetic particles for isolation of total mRNA from early somatic embryos of Norway Spruce (Picea abies /L./ Karst.) and maize plants (Zea mays L.) treated with cadmium(II) ions. The paramagnetic particles were evaluated for analysis of real samples, and poly-adenine was used as a model mRNA. Various approaches (from non-automatic to fully automatic) were tested in terms of handling the particles.