Biodegradable Nanohybrid Materials as Candidates for Self-Sanitizing Filters Aimed at Protection from SARS-CoV-2 in Public Areas

The COVID-19 pandemic has raised the problem of efficient, low-cost materials enabling the effective protection of people from viruses transmitted through the air or via surfaces. Nanofibers can be a great candidate for efficient air filtration due to their structure, although they cannot protect from viruses. In this work, we prepared a wide range of nanofibrous biodegradable samples containing Ag (up to 0.6 at.%) and Cu (up to 20.4 at.%) exhibiting various wettability. By adjusting the magnetron current (0.3 A) and implanter voltage (5 kV), the deposition of TiO₂ and Ag⁺ implantation into PCL/PEO nanofibers was optimized in order to achieve implantation of Ag⁺ without damaging the nanofibrous structure of the PCL/PEO. The optimal conditions to implant silver were achieved for the PCL-Ti0.3-Ag-5kV sample. The coating of PCL nanofibers by a Cu layer was successfully realized by magnetron sputtering. The antiviral activity evaluated by widely used methodology involving the cultivation of VeroE6 cells was the highest for PCL-Cu and PCL-COOH, where the VeroE6 viability was 73.1 and 68.1%, respectively, which is significantly higher compared to SARS-CoV-2 samples without self-sanitizing (42.8%). Interestingly, the samples with implanted silver and TiO₂ exhibited no antiviral effect. This difference between Cu and Ag containing nanofibers might be related to the different concentrations of ions released from the samples: 80 μg/L/day for Cu²⁺ versus 15 µg/L/day for Ag⁺. The high antiviral activity of PCL-Cu opens up an exciting opportunity to prepare low-cost self-sanitizing surfaces for anti-SARS-CoV-2 protection and can be essential for air filtration application and facemasks. The rough cost estimation for the production of a biodegradable nanohybrid PCL-Cu facemask revealed ~$0.28/piece, and the business case for the production of these facemasks would be highly positive, with an Internal Rate of Return of 34%.     

Effective correlation-free reduced Hamiltonian for the νt(E), νn(A1) Coriolis-interacting states of C3v symmetric-top molecules

The effective correlation-free vibrational-rotational Hamiltonian for the Coriolis-interacting ν_t(E) and ν_n(A₁) states in C_3v molecules has been derived. The Hamiltonian includes the terms describing the x-y Coriolis interaction up to the fourth-order, and several useful reduction schemes for the Hamiltonian are suggested.     

Antimony Film Microelectrode for Anodic Stripping Measurement of Cadmium(II), Lead(II) and Copper(II)

The antimony film microelectrode (SbFME) is presented for measuring trace heavy metal ions in combination with anodic stripping voltammetry. The SbFME was tested in model solutions of 0.01 M HCl containing Cd(II) and Pb(II) in the presence of dissolved oxygen. The microsensor exhibited good linear behavior in the examined concentration range 20 μg L⁻¹ to 100 μg L⁻¹ and LoD of 1.9 and 3.1 μg L⁻¹ for Cd(II) and Pb(II), respectively. The suitability of SbFME for measuring trace levels of Cu(II) was demonstrated using the standard reference material of natural water exploiting the sensor's specific characteristic of low re‐oxidation signal for antimony.     

Relationship between electronic structures and antiplasmodial activities of xanthone derivatives: a 2D-QSAR approach

Structural Chemistry - Malaria is an important disease causing many death in several countries of Africa and Asia. In these continents, some plants such as Garcinia cola are used to fight against...     

Chirality-Controlled Self-Assembly of Amphiphilic Dibenzo[6]helicenes into Langmuir–Blodgett Thin Films

Racemic and highly enantioenriched 3-methoxycarbonyl, 3-carboxy, and 3-hydroxymethyl derivatives of dibenzo[6]helicene were prepared. The Langmuir layers of these helicenes were formed at the air–water interface and transferred onto solid substrates to afford Langmuir–Blodgett films, which were then studied by ambient atomic force microscopy and (chir)optical spectroscopy. Significant differences were found in the behaviour of the Langmuir layers as well as in the morphology, UV/Vis, electronic circular dichroism (ECD), and fluorescence spectra of the Langmuir–Blodgett thin films depending on the molecular chirality and nature of the polar group. The experimental results were supported by molecular dynamics simulations.     

Development and Validation of a Simple,Selective, and Accurate Reversed-Phase Liquid Chromatographic Method with Diode Array Detection (RP-HPLC/DAD) for the Simultaneous Analysis of 18 Free Amino Acids in Topical Formulations

Even though there are reported methods for the quantification of free amino acids (FAAs) in biological products, no work has been done on the analysis of these substances in formulations. Moreover, further research is required as the reported methods do not fulfill analytical method requirements. The objective of this study was, therefore, to develop and validate a rapid, reliable, and appropriate RP-HPLC/DAD method for the simultaneous determination of 18 FAAs (l-Ala, l-Arg, l-Asn, l-Asp, l-Gln, l-Glu, l-Gly, l-His, l-Ile, l-Lue, l-Lys, l-Met, l-Orn, l-Phe, l-Pro, l-Ser, l-Thr, and l-Val) in topical formulations. After appropriate method development, the technique was validated for selectivity, linearity and range, limit of detection, limit of quantification, precision, and accuracy. The samples were derivatized with 9-fluorenylmethyl chloroformate (Fmoc-Cl). Chromatographic separation was performed on InfinityLab Poroshell 120 E.C 18 (3?×?50) mm, 2.7 μm column at 25 °C. The mobile phase consisting of water and acetonitrile adjusted to appropriate pH was pumped in gradient mode at a flow rate of 0.7 mL/min. Ten microliters were injected and analyte detection was conducted using a DAD. The results indicate that the method was selective for these FAAs. It was linear over the concentration range of 5–80 µM with a correlation coefficient greater than 0.995. Moreover, it was sensitive, precise, accurate, and robust. All the reported drawbacks of RP-HPLC-based analysis of FAAs were resolved, and hence, this new method can be considered appropriate for the analysis of these FAAs in topical formulations.

     

Recent developments in the field of metal complexes containing photochromic ligands: Modulation of linear and nonlinear optical properties

Organic photochromic molecules are important for the design of photoresponsive functional materials, as switches and memories. Over the past 10 years, research efforts have been directed towards the incorporation of photoresponsive molecules into metal systems, in order either to modulate the photochromic properties, or to photoregulate the redox, optical and magnetic properties of the organometallic moieties. This review article focuses on some of the recent work reported within the last few years in the area of organometallic and coordination complexes containing photochromic ligands for the photoregulation of optical and nonlinear optical properties. The first part is related to photochromic 1,2-diarylethene (DAE)-containing metal complexes, examples of mono- and multi-DAE metal-based will be discussed. The second part deals with metal complexes incorporating spiropyran and spirooxazine derivatives.     

Nerve Agents Assay Using Cholinesterase Based Biosensor

Electrochemical biosensor based on electric eel acetylcholinesterase (AChE) (EC 3.1.1.7) was performed for assay of nerve agents – tabun, sarin, soman, cyclosarin, and VX. The biosensor used AChE as biorecognition element. The presence of nerve agents was accompanied by a strong inhibition of AChE activity. Enzyme activity is easily measurable by electrochemical oxidation of thiocholine created from acetylthiocholine (ATChCl) by AChE‐catalyzed hydrolysis. The tested nerve agents were successfully assayed. The best limits of detection were achieved for sarin (5.88×10^?10 M) and VX (8.51×10^?10 M) after one‐minute assay. The biosensor was found long term stable at low as well as laboratory temperature.