Retention behavior of a homologous series and positional isomers of aliphatic amino acids in hydrophilic interaction chromatography

The retention behavior of several series of free α‐ and ω‐amino acids and positional isomers of amino pentanoic acid in the hydrophilic interaction chromatography mode (HILIC) was studied. The study was carried out on three stationary phases followed by post‐column derivatization with fluorescence detection in order to describe the retention mechanism of the tested amino acids. The effect of chromatographic conditions including acetonitrile content in the mobile phase, mobile phase pH (ranging from 3.5 to 6.5) and concentration of buffer in the mobile phase was investigated. The effect of the number of carbon atoms (n_C) in aliphatic chains of the individual homologue of α‐ and ω‐amino acids and the logarithm of the partition coefficient (logD) on retention was also a part of the presented study. A good correlation (r > 0.98) between the logk and logD values of amino acids or n_C, respectively, was observed. The described linear relationships were subsequently applied to predict the retention behavior of individual members of the homologous series of amino acids and to optimize the mobile phase composition in HILIC. The obtained results confirmed that the retention mechanism of α‐amino acids, ω‐amino acids and positional isomers of amino acids was based on the logD values and the number of carbon atoms in the aliphatic chains of amino acids. The elution order of ω‐amino acids and positional isomers of amino pentanoic acid was strongly dependent on the mobile phase pH in the investigated range whereas the retention factors of all α‐amino acids remained essentially unchanged on all tested stationary phases.     

Highly Enantioselective Synthesis of 1,2,3‐Substituted Cyclopropanes by Using α‐Iodo‐ and α‐Chloromethylzinc Carbenoids

Herein, we report the enantio‐ and diastereoselective formation of trans‐iodo‐ and trans‐chlorocyclopropanes from α‐iodo‐ and α‐chlorozinc carbenoids by using a dioxaborolane‐derived chiral ligand. The synthetically useful iodocyclopropane building blocks were derivatized by an electrophilic trapping of the corresponding cyclopropyl lithium species or a Negishi coupling to give access to a variety of enantioenriched 1,2,3‐substituted cyclopropanes. The synthetic utility of this method was demonstrated by the formal synthesis of an HIV‐1 protease inhibitor. In addition, the related stereoselective bromocyclopropanation was also investigated. New insights about the relative electrophilicity of haloiodomethylzinc carbenoids are also presented.     

Cobalt‐Catalyzed Cross‐Coupling of Functionalized Alkylzinc Reagents with (Hetero)Aryl Halides

A combination of 10 % CoCl₂ and 20 % 2,2′‐bipyridine ligands enables cross‐coupling of functionalized primary and secondary alkylzinc reagents with various (hetero)aryl halides. Couplings with 1,3‐ and 1,4‐substituted cycloalkylzinc reagents proceeded diastereoselectively leading to functionalized heterocycles with high diastereoselectivities of up to 98:2. Furthermore, alkynyl bromides react with primary and secondary alkylzinc reagents providing the alkylated alkynes.     

Development of Novel Stability-Indicating Method for the Determination of Dimethindene Maleate and Its Impurities

A novel and selective stability-indicating liquid chromatographic method has been developed and validated for the analysis of dimethindene maleate, the related substance 2-ethylpyridine, and three degradation products. Dimethindene maleate was subjected to forced degradation study by acid and basic hydrolysis, oxidation, and thermal decomposition. Three degradation products that were formed during the forced degradation study were separated from dimethindene using a Zorbax SB CN column (150 × 4.6 mm; 5 μm); cyanopropyl-bonded stationary phase was applied for the first time for the separation of dimethindene and its impurities. The proposed method was validated and was found suitable for quality control and stability tests of pharmaceuticals containing dimethindene maleate.

     

Bipolar Electrochemiluminescence Imaging: A Way to Investigate the Passivation of Silicon Surfaces

This work depicts the original combination of electrochemiluminescence (ECL) and bipolar electrochemistry (BPE) to map in real-time the oxidation of silicon in microchannels. We fabricated model silicon-PDMS microfluidic chips, optionally containing a restriction, and monitored the evolution of the surface reactivity using ECL. BPE was used to remotely promote ECL at the silicon surface inside microfluidic channels. The effects of the fluidic design, the applied potential and the resistance of the channel (controlled by the fluidic configuration) on the silicon polarization and oxide formation were investigated. A potential difference down to 6 V was sufficient to induce ECL, which is two orders of magnitude less than in classical BPE configurations. Increasing the resistance of the channel led to an increase in the current passing through the silicon and boosted the intensity of ECL signals. Finally, the possibility of achieving electrochemical reactions at predetermined locations on the microfluidic chip was investigated using a patterning of the silicon oxide surface by etched micrometric squares. This ECL imaging approach opens exciting perspectives for the precise understanding and implementation of electrochemical functionalization on passivating materials. In addition, it may help the development and the design of fully integrated microfluidic biochips paving the way for development of original bioanalytical applications.     

Implementation of comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry for the simultaneous determination of halogenated contaminants and polycyclic aromatic hydrocarbons in fish

In the presented study, comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry (GC?×?GC-TOFMS) was shown to be a powerful tool for the simultaneous determination of various groups of contaminants including 18 polychlorinated biphenyls (PCBs), seven polybrominated diphenyl ethers (PBDEs), and 16 polycyclic aromatic hydrocarbons (PAHs). Since different groups of analytes (traditionally analyzed separately) were included into one instrumental method, significant time savings were achieved. Following the development of an integrated sample preparation procedure for an effective and rapid isolation of several groups of contaminants from fish tissue, the GC?×?GC-TOFMS instrumental method was optimized to obtain the best chromatographic resolution and low quantification limits (LOQs) of all target analytes in a complex mixture. Using large-volume programmable temperature vaporization, the following LOQs were achieved-PCBs, 0.01-0.25 μg/kg; PBDEs, 0.025-5 μg/kg; PAHs 0.025-0.5 μg/kg. Furthermore, several capillary column combinations (BPX5, BPX50, and Rxi-17Sil-ms in the first dimension and BPX5, BPX50, Rt-LC35, and HT8 in the second dimension) were tested during the experiments, and the optimal separation of all target analytes even of critical groups of PAHs (group (a): benz[a]anthracene, cyclopenta[cd]pyrene and chrysene; group (b): benzo[b]fluoranthene, benzo[j]fluoranthene and benzo[k]fluoranthene; group (c): dibenz[ah]anthracene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene) was observed on BPX5?×?BPX50 column setup. Moreover, since the determination of target analytes was performed using TOFMS detector, further identification of other non-target compounds in real life samples was also feasible.     

Raman study of PANI thin film during long time period in dependence on storage conditions

Conducting polymer polyaniline which is nowadays in forefront of the interest was in our study prepared in a form of thin films from anilinium sulfate by its chemical oxidation using ammonium peroxydisulfate. During the oxidation process, the polyaniline was deposited on glass slides and immersed into reaction mixture. Two sets of polyaniline thin films were prepared with different oxidation times (10, 20, 30, and 40 min). The first set was kept dry in desiccator and the second one was freely exposed to air moisture. Raman spectroscopy, nondestructive technique which is very sensitive to changes in structure of polymers, was used for the characterization of the protonation state of prepared polyaniline thin films. It was found that storage conditions affect the protonation state which in case of samples kept in desiccator is maintained without significant changes for longer time. Raman spectroscopy also revealed the dependence of protonation state on the oxidation time and 10 min proved as not sufficient for the creation of the protonation form of polyaniline.     

Rapid qualitative and quantitative ultra high performance liquid chromatography method for simultaneous analysis of twenty nine common phenolic compounds of various structures

Twenty nine phenolic compounds comprising nine phenolic acids, sixteen flavonoids (including eight tea catechins, glycosides and aglycones), four coumarins plus caffeine were analysed within 20 min using ultra high performance liquid chromatography (UHPLC) with PDA detection. UHPLC system was equipped with C18 analytical column (100 mm × 2.1 mm, 1.7 μm), utilising 0.1% formic acid and methanol mobile phase in the gradient elution mode. The developed method was tested for the system suitability: resolution, asymmetry factor, peak capacity, retention time repeatability and peak area repeatability. The method was fully validated in the terms of linearity (r² > 0.9990 for all 30 compounds), range (typically 1-100 mg L⁻¹), LOD, LOQ, inter/intra-day precision (<3% and <9% respectively) and inter/intra-day accuracy (typically 100 ± 10%). Subsequently the method was applied to the identification (spectral information and peak purity calculations were profited) and quantification of phenolic compounds and caffeine present in tea infusions and extracts.     

Thermal study of the Ce<Subscript>0.9</Subscript>Tb<Subscript>0.1</Subscript>O<Subscript>2</Subscript> pigment prepared by different synthesis

The inorganic ceramic compounds based on the CeO₂ belong into the group of high-temperature pigments. The pigments have been prepared by the classical dry process (i.e. solid-state reaction) in the temperature range from 1,300 to 1,600 °C and by the coprecipitation at the three different temperatures: 400, 600 and 1,100 °C. The principal of these pigments makes the host lattice of the CeO₂, which is doped by terbium ions. This incorporation of the doped ions leads to obtaining of the interesting dark orange colour after application into ceramic glaze. The aim of our research was to improve and optimize the synthesis conditions of these pigments. The samples were submitted to thermal analysis (TG–DTA) for determination of the temperature interval of the pigment formation and the thermal stability of pigments. The compounds were also measured from the point of view of their colouring, structure and particle size distribution.