Determination of benzotrifluoride derivative compounds in groundwater

Two simple analytical methods for the simultaneous determination and quantification of benzotrifluoride and eight chlorinated, amino and nitro benzotrifluoride derivatives in groundwater are proposed. Benzotrifluoride, 4-chlorobenzotrifluoride, 2,4-dichlorobenzotrifluoride and 3,4-dichlorobenzotrifluoride, were extracted by Purge-and-Trap on the basis of their volatile properties, while 3-aminobenzotrifluoride, 4-nitrobenzotrifluoride, 3-amino-4-chlorobenzotrifluoride, 3-nitro-4-chlorobenzotrifluoride and 4-chloro-3,5-dinitrobenzotrifluoride extractions were done with an automated SPE system. The analytical separations and detections were performed with two different GC systems, both equipped with single quadrupole mass spectrometer as detector. The LOD ranges for the two methods were 0.002–0.005 μg L⁻¹ and 0.01–0.07 μg L⁻¹, respectively. Both extraction methods were developed using spiked Milli-Q water and were then demonstrated with groundwater samples collected during autumn 2008. The areas of groundwater collection were polluted due to an episode of improper industrial soil disposal and consequent leakage of aliphatic and aromatic, fluorinated chemicals into the groundwater. This work eventually revealed the presence of several benzotrifluoride compounds most of them, like dichloro- and amino-derivatives, never been reported as environmental contaminants.     

Rational Design and Development of Anisotropic and Mechanically Strong Gelatin‐Based Stress Relaxing Hydrogels for Osteogenic/Chondrogenic Differentiation

Rational design and development of tailorable simple synthesis process remains a centerpiece of investigational efforts toward engineering advanced hydrogels. In this study, a green and scalable synthesis approach is developed to formulate a set of gelatin‐based macroporous hybrid hydrogels. This approach consists of four sequential steps starting from liquid‐phase pre‐crosslinking/grafting, unidirectional freezing, freeze‐drying, and finally post‐curing process. The chemical crosslinking mainly involves between epoxy groups of functionalized polyethylene glycol and functional groups of gelatin both in liquid and solid state. Importantly, this approach allows to accommodate different polymers, chitosan or hydroxyethyl cellulose, under identical benign condition. Structural and mechanical anisotropy can be tuned by the selection of polymer constituents. Overall, all hydrogels show suitable structural stability, good swellability, high porosity and pore interconnectivity, and maintenance of mechanical integrity during 3‐week‐long hydrolytic degradation. Under compression, hydrogels exhibit robust mechanical properties with nonlinear elasticity and stress‐relaxation behavior and show no sign of mechanical failure under repeated compression at 50% deformation. Biological experiment with human bone marrow mesenchymal stromal cells (hMSCs) reveals that hydrogels are biocompatible, and their physicomechanical properties are suitable to support cells growth, and osteogenic/chondrogenic differentiation, demonstrating their potential application for bone and cartilage regenerative medicine toward clinically relevant endpoints.     

Incorporation of Baccharis dracunculifolia DC (Asteraceae) leaf extract into phosphatidylcholine-cholesterol liposomes improves its anti-inflammatory effect in vivo

The aerial parts of Baccharis dracunculifolia (BdE) is used in the Brazilian folk medicine to treat inflammatory conditions. Here we examined the ability of free and liposomal BdE to modulate reactive oxygen species generation in human neutrophils in vitro and zymosan-induced acute joint inflammation in Wistar rats. We prepared biocompatible liposomes of soya phosphatidylcholine and cholesterol with low diameter, homogeneous size distribution, and neutral surface charge. Free BdE decreased joint swelling, total leucocyte and neutrophil infiltration, and the synovial levels of tumour necrosis factor-α and interleukins 6 and 1β. Incorporation of BdE into liposomes preserved its capacity to inhibit the neutrophil superoxide anion and total reactive oxygen species generation, and improved its anti-inflammatory effect in vivo by decreasing the effective BdE dose by nearly sixfold. The same liposome type lowered the effective dose of caffeic acid by nearly sixteenfold. Therefore, incorporation of BdE into phosphatidylcholine-cholesterol liposomes improves its anti-inflammatory effect.     

Anti-Leishmania and cytotoxic activities of perillaldehyde epoxide synthetic positional isomers

Leishmaniasis belongs to a complex of zoonotic disease caused by protozoa of the genus Leishmania and is considered a major public health problem. Several essential oil chemical components have inhibitory effect against protozoa, including Leishmania donovani. Thus, the aim of this study was to evaluate for the first time the anti-Leishmania activity of two p-menthane monoterpene isomers (EPER-1: perillaldehyde 1,2-epoxide and EPER-2: perillaldehyde 8,9-epoxide) against L. donovani promastigotes as well as evaluating cytotoxic effect on mononuclear peripheral blood cells. Results of anti-Leishmania assay revealed that EPER-2 (IC₅₀ = 3.8 μg.mL^?1) was 16-fold more potent than its isomer EPER-1 (IC₅₀ = 64.6 μg.mL^?1). In contrast to PBMC cells, EPER-2 was not cytotoxic (IC₅₀ > 400 μg.mL^?1) when compared to positive control. These data suggest that the disposition of epoxide group into the p-menthane skeleton affects the anti-Leishmania activity, being that the presence of the exocyclic epoxide group considerably increased potency. Thus, it was possible to observe that the location of the epoxide group into the p-menthane skeleton resulted in different potencies.     

Synthesis of New 1,2,4‐ and 1,3,4‐Oxadiazole Derivatives as Potential Nonpeptide Angiotensin II Receptor Antagonists

The synthesis of new 1,2,4‐ and 1,3,4‐oxadiazole derivatives as potential nonpeptide angiotensin II receptor antagonists is described. The quinoxalinone systems used as the “northern moiety” in these compounds were alkylated through a liquid/liquid phase‐transfer catalysis protocol, with good yields and high nitrogen‐ to oxygen‐alkylated product (N/O) ratios.     

Electron impact mass spectrometry of some macrocyclic polyether lactones

Electron impact mass spectrometry has been used together with linked scans, exact mass measurements and mass-analysed ion kinetic energy spectrometry to study nine inacrocyclic polyether lactones in detail. The presence of abundant hydrogenated oxirane ions has been observed for all the compounds examined, and confirmed by kinetic energy release measurements.     

Modern automated microextraction procedures for bioanalytical,environmental, and food analyses

Sample preparation frequently is considered the most critical stage of the analytical workflow. It affects the analytical throughput and costs; moreover, it is the primary source of error and possible sample contamination. To increase efficiency, productivity, and reliability, while minimizing costs and environmental impacts, miniaturization and automation of sample preparation are necessary. Nowadays, several types of liquid-phase and solid-phase microextractions are available, as well as different automatization strategies. Thus, this review summarizes recent developments in automated microextractions coupled with liquid chromatography, from 2016 to 2022. Therefore, outstanding technologies and their main outcomes, as well as miniaturization and automation of sample preparation, are critically analyzed. Focus is given to main microextraction automation strategies, such as flow techniques, robotic systems, and column-switching approaches, reviewing their applications to the determination of small organic molecules in biological, environmental, and food/beverage samples.     

Thermal,morphostructural and spectrometric characterization of an antibacterial kaolinite-based filter modified with silver for water treatment

Journal of Thermal Analysis and Calorimetry - The aim of this work is to synthesize and characterize a new structured silver–clay dried, calcined or sintered at different temperatures...     

Enzyme-Mediated Preparation of (+)- and (–)-cis-α-Irone and (+)- and (–)-trans-α-Irone

The preparation of (−)- and (+)-trans-α-irone ( 1a and 1b , resp.) and of (+)- and (−)-cis-α-irone ( 1c and 1d , resp.) from commercially available Irone alpha ^® is reported. The relevant step in the synthetic sequence is the initial chromatographic separation of crystalline (±)-4,5-epoxy-4,5-dihydro-cis-α-irone ((±)- 5 ) from oily (±)-4,5-epoxy-4,5-dihydro-trans-α-irone ((±)- 4 ). The latter was subsequently converted, after NaBH₄ reduction, into the crystalline 3,5-dinitrobenzoate ester (±)- 8 , thus allowing a complete separation of the two corresponding diastereoisomeric alcohol derivatives. Suitable enantiomerically pure precursors of the desired products 1a – d were obtained by kinetic resolution of the racemic allylic alcohols derived from (±)- 5 and (±)- 8 , mediated by lipase PS (Amano). The last steps consisted of MnO₂ oxidation and removal of the epoxy moiety with Me₃SiCl/NaI in MeCN. External panel olfactory evaluation showed that (−)-cis-α-irone ( 1d ) has the finest and most distinct `orris butter' character.     

Kinetic and mass transfer parameters of maltotriose hydrolysis catalyzed by glucoamylase immobilized on macroporous silica and wrapped in pectin gel

Applied Biochemistry and Biotechnology - Kinetic and mass transport parameters were estimated for maltotriose hydrolysis using glucoamylase immobilized on macroporous silica and wrapped in pectin...