From Renewable Levulinic Acid to a Diversity of 3‐(Azol‐3‐yl)Propanoates

Efficient heterocyclization of methyl 7,7,7‐trifluoro‐4‐methoxy‐6‐oxo‐4‐heptenoate and methyl 7,7,7‐trichloro‐4‐methoxy‐6‐oxo‐4‐heptenoate into isoxazole and pyrazole derivatives that represent a new type of glutamate‐like 3‐(trihalomethylated‐1,2‐azol‐3‐yl)propanoate is reported. Preparation of the key methyl 7,7,7‐trihalo‐4‐methoxy‐6‐oxohept‐4‐enoate precursors from levulinic acid is also described. The synthetic potential of this synthetic protocol was indicated by the production of several methyl and ethyl 3‐(isoxazol‐3‐yl)propanoates and 3‐(1H‐pyrazol‐3‐yl)propanoates, and the respective acid derivatives, in good (70–95%) yields. The crystal structure for ethyl 5‐(3‐ethoxy‐3‐oxopropyl)‐1H‐pyrazole‐3‐carboxylate ( 10c ) has been determined by monocrystal X‐ray diffraction analysis. The N–H^…H intermolecular hydrogen bonds join the molecules into catamer.     

Conformational analysis of furanoid epsilon-sugar amino acid containing cyclic peptides by NMR spectroscopy,molecular dynamics simulation,and X-ray crystallography: evidence for a novel turn structure

Sugar amino acids (SAAs) are useful building blocks for the design of peptidomimetics and peptide scaffolds. The three-dimensional structures of cyclic hybrid molecules containing the furanoid epsilon-SAA III and several amino acids were elucidated to study the preferred conformation of such an epsilon-SAA and its conformational influence on the backbone of cyclic peptides. NMR-based molecular dynamics simulations and empirical calculations of the cyclic tetramer 1, consisting of two copies of the SAA residue and two amino acids, revealed that it is conformationally restrained. The two SAA residues adopt different conformations. One of them forms an unusual turn, stabilized by an intraresidue nine-member hydrogen bond. The methylene functionalities of the other SAA residue are positioned in such a way that an intraresidue H bond is not possible. The X-ray crystal structure of 1 strongly resembles the solution conformation. Molecular dynamics calculations in combination with NMR analysis were also performed for compounds 2 and 3, which contain the RGD (Arg-Gly-Asp) consensus sequence and were previously shown to inhibit alpha(IIb)beta(3)-receptor-mediated platelet aggregation. The biologically most active compound 2 adopts a preferred conformation with the single SAA residue folded into the nine-member H bond-containing turn. Compound 3, containing an additional valine residue, as compared with compound 2, is conformational flexible. Our studies demonstrate that the furanoid epsilon-SAA III is able to introduce an unusual intraresidue hydrogen bond-stabilized beta-turn-like conformation in two of the three cyclic structures.     

A simple and rapid method to assess lycopene in multiple layers of skin samples

Topical application of lycopene is a convenient way to restore antioxidants depleted from the skin by UV radiation and achieve protection against premature aging and cancer. In this study, a simple, rapid and reproducible method to quantify lycopene in different skin layers was developed, validated and employed to assess this compound after skin penetration studies. Lycopene was extracted from the stratum corneum (SC) and viable epidermis and dermis (ED) by vortex homogenization and bath sonication in a mixture of acetonitrile and methanol (52:48, v/v). Lycopene was assayed by HPLC using a C₁₈ column, and acetonitrile:methanol (52:48, v/v) as mobile phase. The quantification limit of lycopene in samples of SC and ED was 35 ng/mL and the assay was linear from 35 to 2000 ng/mL. Within‐day and between‐days assays coefficients of variation and relative errors (indicative of precision and accuracy) were less than 15% (or 20% for the limit of quantification). Lycopene recovery from SC and ED was dependent on the spiked concentration: for 50 ng/mL, recoveries were 88.3 and 90.5%; for 100–1000 ng/mL, recoveries were 68.6–74.9%. This method has a potential application for lycopene quantification during formulation development and evaluation in the dermatological field. Copyright © 2009 John Wiley & Sons, Ltd.     

Thermal degradation of two classes of block copolymers based on poly(lactic-glycolic acid) and poly(ϵ-caprolactone) or poly(ethylene glycol)

Thermodegradative investigations of two classes of multi-block copolymers containing poly(D,L-lactic-glycolic acid) (PLGA) and either poly(ethylene glycol) (PEG) or poly(ϵ-caprolactone) diol-terminated (PCDT) segments were performed. In particular, the influence of the type and length of the segments as well as of the molar ratio between the D,L-lactic acid (LA) and glycolic acid (GA) residues was investigated at 180°C in air by viscometry, FT-IR analysis and isothermal thermogravimetry. The thermal oxidative degradation of these materials is largely affected by the LA/GA ratio, a higher LA content generally imparting higher stability. The FT-IR analysis suggests that, depending on the composition of the PLGA segments, degradative processes are triggered which can lead to a preferential degradation of the blocks.     

Development of a sequential injection chromatography (SIC) method for determination of simazine,atrazine, and propazine

This paper describes the development of a sequential injection chromatography (SIC) procedure for separation and quantification of the herbicides simazine, atrazine, and propazine exploring the low backpressure of a 2.5 cm long monolithic C₁₈ column. The separation of the three compounds was achieved in less than 90 s with resolution >1.5 using a mobile phase composed by ACN/1.25 mmol/L acetate buffer (pH 4.5) at the volumetric ratio of 35:65 and flow rate of 40 μL/s. Detection was made at 223 nm using a flow cell with 40 mm of optical path length. The LOD was 10 μg/L for the three triazines and the quantification limits were of 30 μg/L for simazine and propazine and 40 μg/L for atrazine. The sampling frequency is 27 samples per hour, consuming 1.1 mL of ACN per analysis. The proposed methodology was applied to spiked water samples and no statistically significant differences were observed in comparison to a conventional HPLC–UV method. The major metabolites of atrazine and other herbicides did not interfere in the analysis, being eluted from the column either together with the unretained peak, or at retention times well‐resolved from the studied compounds.     

Determination of oxygen and nitrogen derivatives of polycyclic aromatic hydrocarbons in fractions of asphalt mixtures using liquid chromatography coupled to mass spectrometry with atmospheric pressure chemical ionization

Liquid chromatography coupled to mass spectrometry with atmospheric pressure chemical ionization was used for the determination of polycyclic aromatic hydrocarbon derivatives, the oxygenated polycyclic aromatic hydrocarbons and nitrated polycyclic aromatic hydrocarbons, formed in asphalt fractions. Two different methods have been developed for the determination of five oxygenated and seven nitrated polycyclic aromatic hydrocarbons that are characterized by having two or more condensed aromatic rings and present mutagenic and carcinogenic properties. The parameters of the atmospheric pressure chemical ionization interface were optimized to obtain the highest possible sensitivity for all compounds. The detection limits of the methods ranged from 0.1 to 57.3 μg/L for nitrated and from 0.1 to 6.6 μg/L for oxygenated derivatives. The limits of quantification were in the range of 4.6–191 μg/L for nitrated and 0.3–8.9 μg/L for oxygenated derivatives. The methods were validated against a diesel particulate extract standard reference material (National Institute of Standards and Technology SRM 1975), and the obtained concentrations (two nitrated derivatives) agreed with the certified values. The methods were applied in the analysis of asphalt samples after their fractionation into asphaltenes and maltenes, according to American Society for Testing and Material D4124, where the maltenic fraction was further separated into its basic, acidic, and neutral parts following the method of Green. Only two nitrated derivatives were found in the asphalt sample, quinoline and 2‐nitrofluorene, with concentrations of 9.26 and 2146 mg/kg, respectively, whereas no oxygenated derivatives were detected.     

Determination of polycyclic aromatic hydrocarbons in fractions in asphalt mixtures using liquid chromatography coupled to mass spectrometry with atmospheric pressure chemical ionization

An analytical method using liquid chromatography coupled to mass spectrometry with atmospheric pressure chemical ionization for the determination of polycyclic aromatic hydrocarbons in asphalt fractions has been developed. The 14 compounds determined, characterized by having two or more condensed aromatic rings, are expected to be present in asphalt and are considered carcinogenic and mutagenic. The parameters of the atmospheric pressure chemical ionization interface were optimized to obtain the highest possible sensitivity for all of the compounds. The limits of detection ranged from 0.5 to 346.5 μg/L and the limits of quantification ranged from 1.7 to 1550 μg/L. The method was validated against a diesel particulate extract standard reference material (NIST SRM 1975), and the obtained concentrations agreed with the certified values. The method was applied to asphalt samples after its fractionation according to ASTM D4124 and the method of Green. The concentrations of the seven polycyclic aromatic hydrocarbons quantified in the sample ranged from 0.86 mg/kg for benzo[ghi]perylene to 98.32 mg/kg for fluorene.     

Short synthesis of the 6,6-spiroketal cores of spirofungins A and B

[reaction: see text] Initial efforts toward the total synthesis of the antifungal antibiotics spirofungins A and B are reported. A short and efficient synthesis of the C9-C20 6,6-spiroketal fragments of both compounds is described. This asymmetric approach uses a very efficient alkylation of a lithiated N,N-dimethylhydrazone followed by spiroketal formation under acidic conditions.     

Structural Stability of Azurin Encapsulated in Sol-Gel Glasses: A Fluorometric Study

In this study we investigated the structural features of azurin, a blue copper-containing enzyme, upon encapsulation in tetramethoxysilane derived sol-gel glasses. Fluorescence spectroscopy revealed that gelation of inorganic networks does not affect the protein tertiary structure and only after two months solvent phase loss altered protein stability. In case of organically modified sol-gel matrices, the protein stability was reduced after encapsulation into hosts modified by adding 3-Mercaptopropyl-trimethoxysilane, 3-Glycidyloxypropyl-trimethoxysilane and Trimethoxy octylsilane, while it was found to be enhanced in networks doped with 3-Trimethoxysilyl-propyl methacrylate and 3-Aminopropyl-trimethoxysilane. In order to better investigate the effects of silica glasses on azurin stability, unfolding experiments of the protein, in solution or entrapped, were also performed in the presence of both methanol and guanidinium hydrochloride (GdHCl). Our results suggest that the matrix protects azurin against the aggregation induced by alcohol, and that the free energy change value upon unfolding by GdHCl was lower than the value calculated for azurin in solution and was dependent on the surface chemistry of silica matrix.     

Comparison of citric acid production by solid-state fermentation in flask, column, tray, and drum bioreactors

Studies were conducted to evaluate citric acid production by solid-state fermentation (SSF) using cassava bagasse as substrate employing a fungal culture of Aspergillus niger LPB 21 at laboratory and semipilot scale. Optimization of the process parameters temperature, pH, initial humidity, aeration, and nutritive composition was conducted in flasks and column fermentors. The results showed that thermal treatment of cassava bagasse enhanced fungal fermentation efficacy, resulting in 220 g of citric acid/kg of dry cassava bagasse with only treated cassava bagasse as substrate. The results obtained from the factorial experimental design in a column bioreactor showed that an aeration rate of 60 mL/min (3 mL/[g·min]) and 60% initial humidity were optimum, resulting in 265.7 g/kg of dry cassava bagasse citric acid production. This was almost 1.6 times higher than the quantities produced under unoptimized conditions (167.4 g of citric acid/kg of dry cassava bagasse). The defined parameters were transferred to semipilot scale, which showed high promise for large-scale citric acid production by SSF with cassava bagasse. Respirometry assays were carried out in order to follow indirectly the biomass evolution of the process. Citric acid production reached 220, 309, 263, and 269 g/kg of dry cassava bagasse in Erlenmeyer flasks, column fermentors, a tray bioreactor, and a horizontal drum bioreactor, respectively.