Determination of the oxidation stability of biodiesel and oils by spectrofluorimetry and multivariate calibration

Oxidation stability is an important quality parameter for biodiesel. In general, the methods used to evaluate the oxidation stability of oils and biodiesels are time-consuming. This work reports the use of spectrofluorimetry, a fast analytical technique, associated with multivariate data analysis as a powerful analytical tool to prediction of the oxidation stability. The prediction of the oxidation stability showed a good agreement with the results obtained by the EN14112 reference method Rancimat. The models presented high correlation (0.99276 and 0.97951) between real and predicted values. The R² values of 0.98557 and 0.95943 indicated the accuracy of the models to predict the oxidation stability of soy oil and soy biodiesel, respectively. The residual distribution does not follow a trend with respect to the predicted variables indicating the good quality of the fits.     

Urinary peptides as a diagnostic tool for renal failure detected by matrix-assisted laser desorption/ionisation mass spectrometry: an evaluation of their clinical significance

The development of new analytical methodologies related to the proteome for the evaluation of renal physiology and pathology is surely of wide interest for physicians, giving them new tools for monitoring complications associated with diabetes, such as end-stage renal disease. In the present study, the clinical significance of the urinary abundance of two peptides, SGSVIDQSRVLNLGPITR (the uromodulin precursor, m/z 1912) and IGPHypGPHypGLMGPP [present in the collagen-α-5(IV) chain precursor, m/z 1219], detected by matrix- assisted laser desorption/ionisation mass spectrometry (MALDI/MS) in microalbuminuric or nephropathic diabetic patients and in non-diabetic nephropathic patients was evaluated. A progressive increase in the abundance of the ion at m/z 1219 and a decrease in the abundance of the ion at m/z 1912 have been found in diabetic microalbuminuric, diabetic-nephropathic and nephropathic patients. Linear correlations are present between serum creatinine values and the abundances of the ions at m/z 1219 (positive correlation, r=0.3645, P<0.0001) and at m/z 1912 (negative correlation, r=-0.3053, P<0.0005). Correlations between the MALDI data and the estimated glomerular filtration rate were also found, while relationships with urinary albumin excretion were found only in sub-sets of patients. Analysis of receiver operating characteristic curves showed a sensitivity up to 96% and a specificity of up to 84% for the two ionic species, or their ratio, for distinguishing diabetic patients with different degrees of nephropathy from healthy subjects, proving that the urinary abundance of the two peptides at m/z 1219 and m/z 1912, determined with MALDI/MS, may be considered as a possible diagnostic tool for the determination of progression toward renal failure, also with the aim of monitoring kidney function, in diabetic patients.     

In situ gelling hexagonal phases for sustained release of an anti-addiction drug

In this study, fluid precursor formulations for subcutaneous injection and in situ formation of hexagonal phase gels upon water absorption were developed as a strategy to sustain the release of naltrexone, a drug used for treatment of drug addiction. Precursor formulations were obtained by combining BRIJ 97 with propylene glycol (PG, 5-70%, w/w). To study the phase behavior of these formulations, water was added at 10-90% (w/w), and the resulting systems were characterized by polarized light microscopy. Two precursor formulations containing BRIJ:PG at 95:5 (w/w, referred to as BRIJ-95) and at 80:20 (w/w, referred to as BRIJ-80) were chosen. Naltrexone was dissolved at 1% or suspended at 5% (w/w). Precursor formulations were transformed into hexagonal phases when water content exceeded 20%. Water uptake followed second-order kinetics, and after 2-4h all precursor formulations were transformed into hexagonal phases. Drug release was prolonged by the precursor formulations (compared to a drug solution in PBS), and followed pseudo-first order kinetics regardless of naltrexone concentration. The release from BRIJ-80 was significantly higher than that from BRIJ-95 after 48 h. The relative safety of the precursor formulations was assessed in cultured fibroblasts. Even though BRIJ-95 was more cytotoxic than BRIJ-80, both precursor formulations were significantly less cytotoxic than sodium lauryl sulfate (considered moderate-to-severe irritant) at the same concentration (up to 50 μg/mL). These results suggest the potential of BRIJ-based precursor formulations for sustained naltrexone release.     

Quantum mechanics calculations, basicity and crystal structure: the route to transition metal complexes of azahelicenes

Quantum mechanics density functional calculations provided gas-phase electron distributions and proton affinities for several mono- and diaza[5]helicenes; computational results, together with experimental data concerning crystal structures and propensity to methylation of the nitrogen atom(s), provide a basis for designing azahelicene complexes with transition metal ions.     

Experimental methodologies and evaluations of computer-aided drug design methodologies applied to a series of 2-aminothiophene derivatives with antifungal activities

Fifty 2-[(arylidene)amino]-4,5-cycloalkyl[b]thiophene-3-carbonitrile derivatives were screened for their in vitro antifungal activities against Candida krusei and Cryptococcus neoformans. Based on experimentally determined minimum inhibitory concentration (MIC) values, we conducted computer-aided drug design studies [molecular modelling, chemometric tools (CPCA, PCA, PLS) and QSAR-3D] that enable the prediction of three-dimensional structural characteristics that influence the antifungal activities of these derivatives. These predictions provide direction with regard to the syntheses of new derivatives with improved biological activities, which can be used as therapeutic alternatives for the treatment of fungal infections.     

Noncovalent association phenomena of 2,5-dihydroxybenzoic acid with cyclic and linear oligosaccharides. A matrix-assisted laser desorption/ionization time-of-flight mass spectrometric and X-ray crystallographic study

D-Glucose and 19 glucose derivatives were investigated by positive and negative ion matrix assisted laser desorption/ionization time-of-flight mass spectrometry using 2,5-dihydroxybenzoic acid (DHB) as the matrix. The set of substrates includes oligomers of amylose and cellulose, native alpha-, beta-, and gamma-cyclodextrin, and chemically modified beta- and gamma-cyclodextrins. These analytes were chosen to modulate molecular weight, polarity, and capability of establishing noncovalent interactions with guest molecules. In the negative-ion mode, the DHB matrix gave rise to charged multicomponent adducts of type [M + DHB - H]- (M = oligosaccharide) selectively for those analytes matching the following conditions: (i) underivatized chemical structure and (ii) number of glucose units > or = 4. In the positive-ion polarity, only some amylose and cellulose derivatives and methylated beta-cyclodextrins provided small amount of cationized adducts with the matrix of type [M + DHB + X]+ (X = Na or K), along with ubiquitous [M + X]+ ions. The results are discussed by taking into account analyte-matrix association phenomena, such as hydrogen bond and inclusion phenomena, as a function of the molecular structure of the analyte. The conclusions derived by mass spectrometric data are compared with the X-ray diffraction data obtained on a single crystal of the 1:1 alpha-cyclodextrin - DHB noncovalent adduct.     

Geometric properties of the heat content

In this paper we study the short time behavior of heat semigroup in connection with the geometry of sets with finite perimeter; we assume C ^1,1 regularity and we relate the heat semigroup with curvatures of the initial datum. We also study the behavior when singularities occur; this is the case when the mean curvature is no more a function, but has to be considered as a Radon measure. This work is the natural continuation of Miranda et al. (Ann Fac Sci Toulouse Math (6) 16(1):125–145, 2007) and is in the spirit of van den Berg and Le Gall (Math Z 215(3):437–464, 1994).     

Raman characterization of bulk ferromagnetic nanostructured graphite

Raman spectroscopy was used to characterize bulk ferromagnetic graphite samples prepared by controlled oxidation of commercial pristine graphite powder. The G:D band intensity ratio, the shape and position of the 2D band and the presence of a band around 2950 cm⁻¹ showed a high degree of disorder in the modified graphite sample, with a significant presence of exposed edges of graphitic planes as well as a high degree of attached hydrogen atoms.     

Development and Validation of an LC-UV Method for Quantitation of 4-Bromo-2,5-Dimethoxyamphetamine (DOB), 4-Bromo-2,5-Dimethoxyphenetylamine (2C-B), Methylphenidate,Fenproporex and Amfepramone

A sensitive and reliable isocratic LC-UV method was developed and validated for quantification of 4-bromo-2,5-dimethoxyamphetamine (DOB), 4-bromo-2,5-dimethoxyphenetylamine (2C-B), amfepramone (diethylpropione, DEP), fenproporex (FEN) and methylphenidate (MPH). Although these substances are not usually associated, the fact that the same method could be used to analyze five different amphetamines would be very helpful in forensic analysis. The validation parameters accessed were linearity, specificity, precision, accuracy, limit of detection, limit of quantification and robustness. During the evaluation of selectivity, benzaldehyde (BZ) and N-methyl-diethanolamine (MDEA), two out of nine related substances tested, did not show good resolution from DOB and FEN, respectively. However, commercial preparations containing DEP, FEN and MPH were analyzed and no interference from their excipients was noticed. Through this method, these five amphetamine derivatives studied were simultaneously identified and quantified. The developed method is easy to implement, fast and suitable for use in routine laboratory analysis. The only limitation would be the quantitation of DOB and FEN in the presence of large amounts of BZ and MDEA, respectively.