Simultaneous determination of benzydamine hydrochloride and five impurities in an oral collutory as a pharmaceutical formulation by high-performance liquid chromatography

A reversed-phase high-performance liquid chromatographic method for the determination of benzydamine hydrochloride and its impurities 3-dimethylaminopropyl 2-benzylaminobenzoate, 3-dimethylaminopropyl-2-aminobenzoate,1-benzyl-1H-indazol-3-ol, 1-benzyl-2-(3-dimethylaminopropyl)-1,2-dihydro-3H-indazol-3-one, and 1-benzyl-3-(3-(3-dimethylaminopropyl)-3-methylamino)propoxy-(1)H-indazole in a collutory formulation is developed. The separation is carried out on a Gemini C(18) (250 × 4.6 mm, 5 μm) column using acetonitrile-methanol-ammonium carbonate buffer (10 mM; pH 10.5) (37.5:37.5:25, v/v/v) as mobile phase at a flow rate of 1.0 mL/min, column temperature 30°C, and UV detection at 218 nm. Famotidine is used as an internal standard. The total run-time is less than 15 min. The analytical curves present coefficients of correlation greater than 0.99, and detection limits are calculated for all analytes. Excellent accuracy and precision are obtained for benzydamine hydrochloride. Recoveries vary from 98.25 to 102.8%, and intra- and inter-day precisions, calculated as the percent relative standard deviation, are lower than 2.2%. Specificity and robustness for benzydamine hydrochloride are also determined. The method allows the quantitative determination of benzydamine hydrochloride and its impurities, and it is suitable for routine analysis in quality control laboratories.     

Sorbent trapping solid-phase microextraction of fragrance allergens in indoor air

Exposure to fragrance substances is exponentially increasing in our daily life due to the enhanced use of scented products. Some fragrances are known to be important sensitizers, inhalation being an important exposure pathway in indoor environments. A simple and sensitive method based on solid-phase enrichment and solid-phase microextraction (SPME) followed by gas chromatography–mass spectrometry (GC–MS) has been developed for the analysis of 24 volatile fragrance allergens in indoor air. Suspected allergens present in the air (0.2 m³) were adsorbed onto a very small quantity of florisil (25 mg) and then transferred to a SPME fiber in the headspace mode (HS). To the best of our knowledge, this paper describes the first application of SPME for the determination of these compounds in air samples. The experimental parameters affecting the microextraction process have been optimized using a multifactor experimental design strategy. Accuracy, linearity, precision and detection limits (LODs) were evaluated to assess the performance of the proposed method. External calibration, using spiked sorbent standards, and not requiring the complete sampling process (only the SPME step), demonstrated to be suitable for the quantification of all suspected allergens. Recovery studies were performed at three concentration levels (0.04, 1.00 and 50 μg m⁻³), obtaining quantitative recoveries (≥85%) in most cases. LOD values at the low ng m⁻³ level were achieved for all the target compounds. The application of the method to daily home air samples demonstrated the ubiquity of this kind of fragrance ingredients in quotidian indoor environments, finding 18 of the 24 considered compounds in concentrations ranging from 0.01 to 56 μg m⁻³. Benzyl alcohol, linalool, citronellol, ionone and lilial were found in most analyzed samples.     

UV‐Dissipation Mechanisms in the Eumelanin Building Block DHICA

The UV‐dissipative mechanisms of the eumelanin building block 5,6‐dihydroxyindole‐2‐carboxylic acid (DHICA) and the 4,7‐dideutero derivative (DHICA‐d₂) in buffered H₂O or D₂O have been characterized by using ultrafast time‐resolved fluorescence spectroscopy. Excitation of the carboxylate anion form, the dominating state at neutral pH, leads to dual fluorescence. The band peaking at λ=378 nm is caused by emission from the excited initial geometry. The second band around λ=450 nm is owed to a complex formed between the mono‐anion and specific buffer components. In the absence of complex formation, the mono‐anion solely decays non‐radiatively or by emission with a lifetime of about 2.1 ns. Excitation of the neutral carboxylic acid state, which dominates at acidic pH, leads to a weak emission around λ=427 nm with a short lifetime of 240 ps. This emission originates from the zwitterionic state, formed upon excitation of the neutral state by sub‐ps excited‐state intramolecular proton transfer (ESIPT) between the carboxylic acid group and the indole nitrogen. Future studies will unravel whether this also occurs in larger building blocks and ESIPT is a built‐in photoprotective mechanism in epidermal eumelanin.     

Direct Electrochemical Determination of Glyphosate at Copper Phthalocyanine/Multiwalled Carbon Nanotube Film Electrodes

A copper phthalocyanine/multiwalled carbon nanotube film‐modified glassy carbon electrode has been used for the determination of the herbicide glyphosate (Gly) at ?50 mV vs. SCE by electrochemical oxidation using differential pulse voltammetry (DPV). Cyclic voltammetry and electrochemical impedance spectroscopy showed that Gly is adsorbed on the metallic centre of the copper phthalocyanine molecule, with formation of Gly‐copper ion complexes. An analytical method was developed using DPV in pH 7.4 phosphate buffer solution, without any pretreatment steps: Gly was determined in the concentration range of 0.83–9.90 μmol L^?1, with detection limit 12.2 nmol L^?1 (2.02 μg L^?1).     

Assessment of the ageing of triterpenoid paint varnishes using fluorescence,Raman and FTIR spectroscopy

The assessment of the influence of natural and artificial ageing on the spectrofluorescence of triterpenoid varnishes dammar and mastic is the focus of this work. Both Fourier transform infrared (FTIR) microscopy using attenuated total reflectance and Raman spectroscopy have been employed for complementary molecular analysis of samples. Synchronous fluorescence spectroscopy, excitation emission spectroscopy, and statistical analysis of data have been used to monitor changes in the optical properties of varnish samples. Assessment of naturally and artificially aged samples using excitation emission spectroscopy suggests that extensive exposure to visible light does not lead to easily appreciable differences in the fluorescence of mastic and dammar; cluster analysis has been used to assess changes, which occur with artificial ageing under visible light, indicating that differences in the fluorescence spectra of aged triterpenoids may be insufficient for their discrimination. The results highlight significant differences between the initial fluorescence of films of dammar and mastic and the fluorescence, which develops with ageing and oxidation, and specific markers, which change with ageing in FTIR and Raman spectra, have been identified.     

ESI-MS/MS library of 1,253 compounds for application in forensic and clinical toxicology

An electrospray ionization tandem mass spectrometry (ESI-MS/MS) library which contains over 5,600 spectra of 1,253 compounds relevant in clinical and forensic toxicology has been developed using a hybrid tandem mass spectrometer with a linear ion trap. Pure compound solutions—in some cases solutions made of tablets—were prepared and 1 to 2,000 ng of each compound were injected into the system using standard reversed-phase analytical columns with gradient elution. To obtain maximum mass spectral information enhanced product ion spectra were acquired with positive and/or negative ionization at low, medium, and high collision energies and additionally applying collision energy spread. In this mode, all product ions generated by the different collision energies are trapped in the linear ion trap prior to their detection. The applicability of the library for other types of hybrid tandem mass spectrometers with a linear ion trap of the same manufacturer as well as a standard triple-quadrupole tandem mass spectrometer has been investigated with a selection of compounds. The spectra of the developed library can be used to create methods for target analysis, either screening methods or quantitative procedures by generating transitions for multiple reaction monitoring. For those procedures, suitable transitions and convenient collision energies are selected from the library. It also has been utilized to identify compounds with a multi target screening approach for clinical and forensic toxicology with a standardized and automated system. The novel aspects compared to our former library produced with a standard triple-quadrupole mass spectrometer are the enlargement of the ESI-MS/MS library and the additional acquisition of spectra with collision energy spread.     

Affinity of Hemicellulose for Cellulose Produced by Acetobacter Xylinum

Cellulose composites were produced by culturing Acetobacter aceti subsp. xylinum (ATCC 53524, agitation tolerant strain) under shaking and agitating conditions in the presence of 2% pine or beech Björkman lignin-carbohydrate complexes (LCCs) or six different types of hemicellulosic polysaccharides including glucuronoxylan, glucomannan, O-acetyl-glucuronoxylan, arabinoglucuronoxylan, arabinogalactan and xyloglucan. Hemicellulosic polysaccharide contents in cellulose composites were similar in spite of the differences in culture, shaking and agitating conditions. On the basis of hemicellulosic polysaccharide contents and X-ray diffraction patterns after extraction by dilute NaOH solution, glucomannan family polysaccharides were found to have the highest affinity to bacterial cellulose. Composites with neutral and acidic LCCs were resistant against alkali while high lability of their delignified carbohydrates against alkali indicates the importance of lignin for formation of cellulose-hemicellulose-lignin framework of plant secondary cell-walls.     

Ligand-free Suzuki-Miyaura reactions in PEG 300

In this work, we present ligand-free Suzuki cross-coupling reactions in PEG 300 under thermal conditions at 55 °C with good yields of conversion; better results were obtained with low reaction time. In 1 hour, 1-iodo-4-nitrobenzene and phenylboronic acid reached 98% of the yield and 9700 of TON. Better results were obtained with Pd(0) sources. The reaction system was recycled up to three times with good activity.     

The protonation thermodynamics of cyclodextrin-containing polymers for drug inclusion

A poly(amido-amine), PAA, bearing β-CD units in the side chain was synthesized by a polyaddition reaction of 1,4-bis-acryloyl-piperazine with 6-monodeoxy-6-monoamino-β-cyclodextrin (β-CD-NH₂). Unlike the simple β-CD-NH₂ with a greater basicity constant (log K = 8.60), the polymer revealed an unusual polyelectrolyte behaviour with a lower basicity constant (log K° = 6.29) of the tertiary nitrogen atom, that is strongly dependent on the degree of protonation α of the whole macromolecule. It follows the modified Henderson–Hasselbalch equation with n = 1.75, in a wide α-range. The greater (?46.1 kJ/mol) and the lower (?27.6 kJ/mol) enthalpy (ΔH°) changes of the compounds were in line with the protonation of a primary or a tertiary nitrogen atom. The calorimetric data suggested that the PAA protonation destroyed a packing structure formed by two rigid β-CD side chains interacting head-to-head. The UV spectrophotometric data showed that the PAA exhibits affinity towards the l-ascorbic acid at low pH (pH 2.46) with an isosbestic point at 241 nm and a slight blue shift of the maximum absorption of the ascorbic acid (244 nm) on PAA additions.     

Development of a solid phase dispersion-pressurized liquid extraction method for the analysis of suspected fragrance allergens in leave-on cosmetics

A new method based on solid phase dispersion-pressurized liquid extraction (PLE) followed by gas chromatography-mass spectrometry (GC-MS) has been developed for the determination of 26 suspected fragrance allergens (all the regulated in the EU Cosmetics Directive amenable by GC, as well as pinene and methyleugenol) in cosmetic samples. The effects of the temperature, extraction time and solvent, and dispersing sorbent, affecting the whole proposed procedure, have been evaluated using a multifactor strategy. The optima conditions after the analysis of main and second order effects entailed the extraction at 120°C for 15 min, using hexane/acetone as solvent, and florisil as dispersing sorbent. The method performance has been studied, showing good linearity (R≥0.996) as well as good precision (RSD≤10%). Detection limits (S/N=3) ranged from 0.000001 to 0.0002% (w/w), values far below the established restrictions as regard labelling in the European Cosmetics Regulation. Reliability was demonstrated through the quantitative recoveries of all the studied compounds. The absence of matrix effects allowed quantification of the compounds by calibration with standard solutions. The analysis of 10 samples (several moisturizing and anti-wrinkle creams and lotions, hand creams, and sunscreen and after-sun creams), covering very different matrices, showed the presence of suspected allergens in all the analyzed samples; in fact, half of the samples contained an elevated number of them. Although the ubiquity of these compounds was demonstrated, labelling was in all cases in consonance with the European Cosmetics Regulation.