GC Methods for the Determination of Methanol and Ethanol in Insulating Mineral Oils as Markers of Cellulose Degradation in Power Transformers

Methanol and ethanol in transformer oils have been recently proposed as new markers of thermal and mechanical degradation of cellulose (the solid insulation in power transformers). In this work, we optimized and compared the performance of two headspace gas chromatographic methods based on flame ionization (HS–GC–FID) and mass spectrometry detection (HS–GC–MS) to determine methanol and ethanol in insulating mineral oil. For methanol and ethanol, the detection limits were 12 and 27 μg kg^?1 (HS–GC–FID) and 1.3 and 3.1 μg kg^?1 (HS–GC–MS). Repeatability was evaluated in transformer oils for both the methods at different concentration levels of analytes and RSD values were found to lie between 1.8 and 16 %. The accuracy of the methods was assessed under a proficiency test (Cigré JWG A2/D1.46). The methods were compared by a F-test and a one-sided paired t test performed on 21 transformer oils in service. Correlations of methanol and ethanol content in sampled oils against their actual time of service are provided. For each sample, the content of traditional markers (furan-2-carbaldehyde and CO₂) was also measured, finding a correlation between light alcohols and CO₂ content. This indicates that methanol and ethanol determination may be helpful in providing further information on the thermal degradation conditions of transformers’ solid insulation. The method developed is currently routinely applied by the laboratories of Sea Marconi Technologies for the assessment of transformers’ conditions.     

Gadolinium(III)-loaded nanoparticulate zeolites as potential high-field MRI contrast agents: relationship between structure and relaxivity

The effects of dealumination, pore size, and calcination on the efficiency (as expressed in the relaxivity) of Gd3+-loaded zeolites for potential application as magnetic resonance imaging (MRI) contrast agents were studied. Partial dealumination of zeolites NaY or NaA by treatment with (NH4)2SiF6 or diluted HCl resulted in materials that, upon loading with Gd3+, had a much higher relaxivity than the corresponding non-dealuminated materials. Analysis of the 1H NMR dispersion profiles of the various zeolites showed that this can be mainly ascribed to an increase of the amount of water inside the zeolite cavities as a result of the destruction of walls between cavities. However, the average residence time of water inside the Gd3+-loaded cavities did not change significantly, which suggests that the windows of the Gd3+-loaded cavities are not affected by the dealumination. Upon calcination, the Gd3+ ions moved to the small sodalite cavities and became less accessible for water, resulting in a decrease in relaxivity. The important role of diffusion for the relaxivity was demonstrated by a comparison of the relaxivity of Gd3+-loaded zeolite NaY and NaA samples. NaA had much lower relaxivities due to the smaller pore sizes. The transversal relaxivities of the Gd3+-doped zeolites are comparable in magnitude to the longitudinal ones at low magnetic fields (<60 MHz). However at higher fields, the transversal relaxivities steeply increased, whereas the longitudinal relaxivities decreased as field strength increased. Therefore, these materials have potential as T1 MRI contrast agents at low field, and as T2 agents at higher fields.     

Photochemical synthesis of aldehydes in the solid phase

A substituted anthraquinone (AQ), previously shown to photochemically generate benzaldehyde in methanol solution, was attached to a commercially available resin via an 11 carbon tether and an amide bond. Photolysis of the polymer-bound AQ with visible or 350 nm UV light resulted in the formation of benzaldehyde in yields of 50-55% as determined by HPLC. The phenolic positions in the polymer were then alkylated using benzyl bromide and 1-iodo-3-(4-nitrophenyl)propane in a coupling reaction with K(2)CO(3) as a base and a solution-phase proton shuttle. Photolysis of these alkylated polymers resulted in the formation of benzaldehyde (54-89%) and 3-(4-nitrophenyl)-propanal (58-67%). The yields of both aldehydes dropped considerably with subsequent realkylation and photolysis, and the polymer beads began to show signs of deterioration. This is the first time that aldehydes have been made photochemically on a solid-supported phase.     

Hybrid gadolinium oxide nanoparticles: multimodal contrast agents for in vivo imaging

Luminescent hybrid nanoparticles with a paramagnetic Gd2O3 core were applied as contrast agents for both in vivo fluorescence and magnetic resonance imaging. These hybrid particles were obtained by encapsulating Gd2O3 cores within a polysiloxane shell which carries organic fluorophores and carboxylated PEG covalently tethered to the inorganic network. Longitudinal proton relaxivities of these particles are higher than the positive contrast agents like Gd-DOTA which are commonly used for clinical magnetic resonance imaging. Moreover these particles can be followed up by fluorescence imaging. This study revealed that these particles suited for dual modality imaging freely circulate in the blood vessels without undesirable accumulation in lungs and liver.     

Functional Characterizations of Basic Properties of Utility Representations

 Consider uncertain alternatives for which an event has two consequences (binary gambles, “gambles” for short) and over them an operation of joint receipt which need not be closed and may be non-commutative. The two structures are linked by a distributivity property called segregation and a preference order. Utility functions order nonnegative numbers to consequences and gambles. Utility representations describe how the utility of a gamble depends on the utilities of consequences and on the “weight” of the event (a number in [0,1], depending on the event). Functional characterizations give necessary and sufficient conditions, often in form of functional equations, for certain properties of representations. We first give a functional characterization of the often postulated event commutativity stating that two events can be interchanged in special composite gambles where one outcome is a consequence but the other is itself a gamble. A utility representation is separable if it is multiplicative for gambles with one consequence having 0 utility. We give three more specific characterizations of separable representations by segregation, by homogeneity and event commutativity, and by homogeneity and segregation, and show that in the last case event commutativity follows. Received 10 August 2001; in revised form 6 November 2001     

Effects of contact force and salt concentration on the unbinding of a DNA duplex by force spectroscopy

We report that varying the contact force in force spectroscopy results in a significant shift in DNA unbinding forces, measured from short oligonucleotides using a PicoForce microscope. The contact force between a 30-mer complementary DNA-coated probe and surface was varied from 100 pN to 10 nN, resulting in a significant shift in the most abundant unbinding force measured between the duplex. When contact forces were set at 200 pN or less, which is generally considered to be a low contact force region for biomolecular force spectroscopy studies, the shift in DNA unbinding forces was significant with changes in contact force. The effect of the salt concentration on the DNA unbinding forces was also examined for a range of salt concentrations from 5 to 500 mM because the presence of salt ions is necessary to facilitate the hybridization process. Although an increase in salt concentration resulted in the facilitation of DNA multiple binding events during force spectroscopy measurements, no significant shift in unbinding forces was observed. Our experiment demonstrates that the wide variation in DNA unbinding forces reported in the literature (50-600 pN) for short oligonucleotides can be accounted for by the different contact forces used and shows little or no effect of the salt concentration used in those studies. Furthermore, this study demonstrates the importance of reporting contact forces in force spectroscopy measurements for quantitative comparisons between different biomolecular systems, especially for noncovalent-type interactions.