Thermal and dynamic analysis of the reactions between formic acid and triethylamine

It is possible to study the problems of thermal regulation and energy storage by utilizing chemical reactions. For this purpose, a method of dynamic and global modelling is used to determine the enthalpy of reaction of formic acid and triethylamine.     

Spectrophotometric determination of thorium in food using 2-(2,5-disulfonic-4-methoxyphenylazo)-7-(2-hydroxyl-5-carboxylphenylazo)-1,8-dihydroxynaphthalene-3,6-disulfonic acid

A new highly sensitive and selective chromogenic reagent, 2-(2,5-disulfonic-4-methoxyphenylazo)-7-(2-hydroxyl-5-carboxylphenylazo)-1,8-dihydroxynaphthalene-3,6-disulfonic acid (1), was synthesized and applied to the spectrophotometric determination of trace thorium. In 5 mL of a 6 M perchloric acid medium, which greatly increases the selectivity, thorium reacts with 1 to form a 1: 2 green complex, having a sensitive absorption peak at 670 nm. Under optimal conditions, Beer’s law is obeyed over the range from 0 to 0.8 μg/mL Th(IV) and the apparent molar absorptivity is 2.09 × 10⁵ L/mol cm. It is found that, uranium(VI), Ti(IV), heavy rare earths, and most of other common metal ions do not interfere. The method has been tested on the determination of thorium in food samples with satisfactory results. The text was submitted by the authors in English.     

Effect of molecular orientation distribution and crystallinity on the measurement of the crystal lattice modulus of nylon 6 by x-ray diffraction

The crystal lattice modulus of nylon 6 (-type) was measured by x-ray diffraction using nylon 6 films drawn up to five times. The measured crystal lattice modulus was 173–175 GPa for all specimens whose crystallinity and the Young's modulus were beyond 46% and 3.75 GPa, respectively. These results indicate that a state of homogenous stress can be achieved. In contrast, the values were scattered for the speciments whose crystallinity and Young's modulus are less than the above values. To study the origin, a numerical calculation of the crystal lattice modulus, as measured by x-ray diffraction, was carried out by considering effects on the orientation factors of molecular chains and crystallinity. In this calculation, a previously introduced model was employed, in which oriented crystalline layers are surrounded by oriented amorphous phases so that the strains of the two phases at the boundary are identical. The theoretical results calculated by the introduced model indicated that the crystal lattice modulus by x-ray diffraction is almost equal to the intrinsic crystal modulus if the morphology of the test specimen can be represented as a series model. In contrast, if a parallel model is more appropriate, the difference between the measured modulus and the intrinsic value can be pronounced. Such morphological dependence was found to be less pronounced with increasing high degree of molecular orientation and crystallinity.     

Novel polysiloxane formation process from dimethyldiethoxysilane in the presence of oxalic acid

Polysiloxane formation in dimethyldiethoxysilane (DMDES)-ethyl alcohol (EtOH(D))-oxalic acid (OA) (DMDES:EtOH(D):OA=1:2:0.5) and DMDES-dimethylsulfoxide (DMSO)-OA (DMDES:DMSO:OA=1:2:0.5) systems was investigated by gas chromatography-mass spectrometry and ²⁹Si-nuclear magnetic resonance. While the DMDES-EtOH(D)-OA system was homogeneous, the DMDES-DMSO-OA system consisted of two immiscible phases. In both systems, ethoxy-terminated linear oligomers ((EtO)Me₂SiO(Me₂SiO)_nSiMe₂(OEt); n=0–4, Et = C₂H₅, Me = CH₃) and cyclic tetramer ((Me₂SiO)₄) were identified. The reaction mechanism for polysiloxane formation is discussed.     

Study of feed temperature control of chromatography using computional fluid dynamics simulation

Recently preparative high-performance liquid chromatography (HPLC) has been used more and more frequently to separate drugs and natural substances. However, large-scale HPLC easily tends to reduce the yield and purity of the product. Hydrodynamic and heat factors play an important roles. Generally, in a large-scale HPLC column, the tracer profile inside column will take on a parabolic shape because of the distributor, which will impact the separation performance of the column. With the inlet temperature suitably lower than the wall temperature, this situation could be improved to some extent. In this work, some experiments were conducted using HPLC, with a column 10 cm in diameter to determine the optimal temperature difference between wall and inlet temperatures. The wall temperature was fixed at about 30 degrees C and the inlet temperature varied from 15 to 30 degrees C. The flow-rate of the eluent, methanol, was 300 ml/min. The experimental result was simulated using CFD software FLUENT 4.4.4. The simulated temperature field fitted the experimental one very well and the simulated flow, temperature and tracer distribution inside column could provide good explanation of separation performance under different conditions. In addition, the simulation could at least approximately predict the optimal temperature difference.     

Comparison of denuder and impinger sampling for determination of gaseous toluene diisocyanate (TDI)

An air-sampling method employing denuders coated inside with a chemisorptive stationary phase has been evaluated for analysis of the hazardous gaseous 2,4 and 2,6 isomers of toluene diisocyanate (TDI). The denuder stationary phase consisted of polydimethylsiloxane (SE-30) to which dibutylamine (DBA) was added as a reagent for derivatization of TDI. The accuracy and precision of sampling by means of denuders were shown to differ only slightly from those of the established impinger method. The denuder method was, however, also shown to be suitable for long-term measurements (up to 8 h). The limit of determination (LOD) of the method, including LC-APCI-MS-MS analysis, was found to be 1.9 microg m(-3) and 1.2 microg m(-3) for 2,4- and 2,6-TDI, respectively, for short-term measurements (15 min). Significant lower LOD was obtained for long-term measurements. This is well below the Occupational Safety and Health Administration (OSHA) 8-h TWA (time-weighted average) exposure limit, which is 40 microg m(-3) for the sum of the TDI isomers. The denuder method was also found to be robust and easy to handle. The samplers can be prepared several days before sampling with no loss in performance. The contents of denuders should, on the other hand, be extracted immediately after sampling to prevent degradation of the isocyanate derivatives formed.     

Vibrational Spectroscopic Investigations of M(Imidazole)2Ni(CN)4·2 Dioxane Clathrates

Four new clathrates of the formula M(Im)2Ni(CN)4·2·Dioxane (where M = Co, Ni, Cu, Cd; Im = Imidazole) have been prepared in powder form and their FT-IR and laser-Raman spectra are reported for the first time. These clathrates are analogues to the previously reported classical Hofmann type clathrates except for the copper clathrate. The Cu clathrate has different spectral features in comparison with its analogues due to the Jahn-Teller effect.     

Agents for the treatment of overactive detrusor. II. Synthesis and inhibitory activity on detrusor contraction of 1,1'-biphenyl-2,6-dicarboxylic acid diesters with an aminoalkyl group in the ester function.

A series of 1,1'-biphenyl-2,6-dicarboxylic acid diesters with an aminoalkyl group in the ester function were synthesized and examined for their inhibitory activity on detrusor contraction in vitro and in vivo. In the in vivo test, arrhythmia was observed as a side effect. Among those compounds synthesized, 2-methyl 6-[4-(1-methylpiperidinyl)] 3-hydroxy-5-methyl-2'-nitro-1,1'-biphenyl-2,6-dicarboxylate (18) showed strong inhibitory activity on detrusor contractions in vivo (ED50 = 0.54 mg/kg i.v., ED50 = 7.2mg/kg i.d.) and good separation from the side effect. Compound 18 was chosen for further pharmacological evaluation as an agent for the treatment of overactive detrusor.