Second-order nonlinear optical properties of the Ag(111)/electrolyte interface in the presence of self-assembled monolayers containing conjugated pi systems. I. Alpha-functionalized terthiophene films on Ag(111)

The nonlinear optical properties of self-assembled monolayers obtained from bonding two different alpha-functionalized terthiophenes (alpha-T3) to (111) silver electrode surfaces have been investigated using second harmonic generation (SHG). The two (alpha-T3) compounds used were functionalized with alkane chains of different lengths (C8 and C4), and each was terminated with a thiol anchoring group. A nitrile group was attached to the terminal thiophene ring of the (alpha-T3) compound with the C4 chain. The orientation of the polarization of the incident beam was changed systematically and gradually between "p" and "s" orientation and the SH signal (isotropic and anisotropic contributions) analyzed in both directions ("P" and "S"). The symmetry of the system was reduced by the presence of the adlayers from C3v to C3. The dependence on the applied potential and the incident wavelength has also been studied. The relative magnitudes and phases of the various second-order tensor elements have been estimated and compared with the values for a bare surface. A resonance process in the (alpha-T3) pi moiety has been investigated, and from this, the effective "band-gap" energies of the organic semiconductor SAMs (i.e., the energy difference between the pi-pi bands) have been estimated.     

Classification of white wine aromas with an electronic nose

This paper reports the use of a tin dioxide multisensor array based electronic nose for recognition of 29 typical aromas in white wine. Headspace technique has been used to extract aroma of the wine. Multivariate analysis, including principal component analysis (PCA) as well as probabilistic neural networks (PNNs), has been used to identify the main aroma added to the wine. The results showed that in spite of the strong influence of ethanol and other majority compounds of wine, the system could discriminate correctly the aromatic compounds added to the wine with a minimum accuracy of 97.2%.     

Electrochromic properties of poly(alkoxy-terthiophenes): an experimental and theoretical investigation

Much effort has been made to synthesize novel compounds and enhance the optical properties of poly(terthiophenes). The electrochromic properties of poly(4,4′′-dimetoxy-3′-methyl-2′-5′,2′′-terthiophene) (PDMMT) and poly(4,4′′-dipentoxy-3′-methyl-2′-5′,2′′-terthiophene) (PDPMT) have been studied focusing on the differences in the alkoxy-group length. Theoretical calculations were employed to elucidate the structural and thermodynamic stability of the monomers and dimmers. The results showed that in this type of thiophenes large alkoxy chains assist positive charge dispersion through hyperconjugative effect. Thus, PDPMT is thermodynamically more stable than PDMMT in the oxidized state, leading to better electrochromic stability and optical memory.     

Production of18F using a natural water target at the CV-28 cyclotron at IPEN-CNEN/SP

The development of an automated water target for the production of¹⁸F is described. The system was fully fested and shown to be reliable and secure. The chemical separation of¹⁸F was carried out using an anionexchange resin and K₂CO₃ as eluent. The¹⁸F production yields were, on average, (4.81±0.42) MBq/Ah and the specific activity was higher than 6.623×10⁵ MBq/mmol. Heat transfer measurements and calculations were made.     

Studies on binuclear hydroxo/carboxylato-bridged manganese(III) complexes and a mononuclear manganese(III) complex involving salen type ligands

Synthesis of six hydroxo-bridged binuclear manganese(III) complexes of formulae [MnL-X-MnL](ClO₄) [X = OH (1–6)] along with a mononuclear manganese(III) complex (7) [Mn(L)(L′)(MeOH)₂] [HL′ = 2-(2-hydroxy-phen-yl)benzimidazole] and two carboxylate-bridged binuclear manganese(III) complexes (8) and (9) are described. The complexes have been characterized by the combination of i.r., u.v.-vis spectroscopy, magnetic moments and by their redox properties. The electronic spectra of all the complexes exhibit almost identical features consisting of two d–d bands at ca. 550 and 600 nm, one MLCT band at ca.400 nm, together with two π–π^* intra-ligand transitions at ca. 250 nm and ca.300 nm. Room temperature magnetic data range from μ = 2.7–3.0 BM indicates some super-exchange between the binuclear metal centers via bridging hydroxo/carboxylato groups. The X-ray crystal structure of the binuclear complex (5) revealed that it has a symmetric Mn^IIIN₂O₂ core bridged by a hydroxyl group. The X-ray analysis of the mononuclear complex (7) showed that the manganese-center possesses a distorted octahedral geometry. Electrochemical properties of hydroxo-bridged manganese(III) complexes (1–6) show identical features consisting of an irreversible and a quasi-reversible reduction corresponding to the Mn₂^III → Mn^IIMn^III → Mn^IIMn^II couples in the voltammogram. It was found that electron withdrawing substituents on the ligand result in easier reduction. Complex (7) displays an irreversible reduction at 0.08 V and a reversible oxidation at 0.45V assignable to the Mn^III → Mn^II reduction and Mn^III → Mn^IV oxidation, respectively. The carboxylate-bridged compound (8) exhibits two irreversible oxidations at 0.4 and 0.6 V, probably due to Mn₂^III → Mn^IIIMn^IV → Mn^IVMn^IV oxidations and shows a quasi-reversible reductive wave at −0.85 V, tentatively assigned to Mn₂^III → Mn^IIMn^III reduction.     

Kinetics and Mechanism of Ni(II) Chelation in Model and Real Solutions of Xylem Sap of Quercus ilex

The kinetics of formation and dissociation of Ni(II) complexes with oxalic and citric acids was studied by cyclic voltammetry in model solutions of xylem sap of Q. ilex (the dominant tree growing on serpentine soils of Northeast Portugal) using representative concentrations, pH and ionic strength. The role of magnesium on complex formation was analyzed from solutions where Mg is present at concentration levels found in the xylem sap of Q. ilex growing on both nonserpentine and serpentine soils. Kinetics studies were also done in diluted solutions of real xylem sap samples, spiked with increasing amounts of magnesium. The values obtained for the apparent rate constants were those anticipated by the proposed model. To test the validity of the methodology and mechanisms, formation rate constants, k_f (M^?1 s^?1) of Ni(II) complexes with citrate and oxalate were evaluated that compare with the values from Eigen mechanism.     

Preconcentration Systems Using Polyurethane Foam/Me-BDBD for Determination of Copper in Food Samples

A new reagent, 6-[2′-(6′-methyl-benzothiazolylazo)]-1,2-dihydroxy-3,5-benzenedisulfonic acid (Me-BDBD), was synthesised and used in on-line and off-line systems for copper preconcentration by solid-phase extraction. Spectrophotometry and Flame Atomic Absorption Spectrometry (FAAS) were the detection techniques. Polyurethane foam loaded with Me-BDBD packed in a minicolumn was used as sorbent in both systems. The spectral characteristics of Me-BDBD were investigated. The optimum pH values for maximum sorption of the metal are between 7.0 and 8.5. Copper was desorbed with 0.05 and 0.50 mol L⁻¹ hydrochloric acid solutions, for on-line and off-line systems, respectively. The effects of several foreign substances on the adsorption of copper are reported. The enrichment factors obtained were 7 (on-line) and 26 (off-line) for the systems. The proposed procedures allowed the determination of copper with detection limits of 3.4 and 1.4 μg L⁻¹ (0.85 and 0.35 μg per gram of sample) for on-line and off-line systems, respectively. The precision of the procedures was also calculated: 3.2 (on-line) and 1.9% (off-line). The validation of the procedures was carried out by analysis of certified reference material. The copper contents in corn and rice flour and black tea samples were determined by applying the proposed procedures.     

Spectrophotometric study of the equilibria in aqueous copper(II) azide solutions

The reaction between copper (II) and azide has been studied spectrophotometrically at four wavelengths, at 25 degrees , and ionic strength 4.00M (sodium perchlorate). The formation constants beta(2) and beta(3) found are 2.90 +/- 0.08 x 10(4) and 3.02 +/- 0.07 x 10(6) respectively. The results obtained from potentiometric measurements with a solid-state electrode disagree with those calculated from the spectrophotometric data. Causes of the discrepancy are discussed.     

Vapor Pressure and Solid Phases of Methanol below Its Triple Point Temperature

We present an experimental work devoted to study of the thermodynamical properties of solid methanol. We combine Fourier transform infrared spectroscopy (FTIR) and mass spectrometry (MS) to measure, for the first time, the vapor pressure of various methanol solid phases and determine their Clausius-Clapeyron equations. We perform our experiments between T = 130 K and the triple point temperature T(t) = 175.61 K. When methanol is condensed from its vapor below T(t), we observe three different solid phases depending on temperature. A condensation at T = 130 K forms a metastable phase with an enthalpy of sublimation deltaH(metastable-vapor) = 42.9 +/- 0.5 kJ.mol(-1). Upon heating, this phase transforms itself at T approximately 145 K to the alpha-phase that has an enthalpy of sublimation deltaH(alpha-vapor) = 46.9 +/- 0.2 kJ.mol(-1). Cooling the alpha-phase does not lead back to the metastable phase, whereas heating this alpha-phase leads to the beta-phase occurrence at T(alpha-beta) = 157.36 K. This latter one is stable until T(t) and has an enthalpy of sublimation deltaH(beta-vapor) = 44.2 +/- 0.5 kJ.mol(-1).