Me2ESiMe3 (E = As,N, P) Compounds—Efficient Reagents for Replacement of the Fluorine Atom by Me2E Group in the Complex [(η6-1-F-3,5-Me2C6H3)(η5-C5EtMe4)Rh](CF3SO3)2 >

Russian Journal of Organic Chemistry -     

Application of infrared spectroscopy to monitoring gas insulated high-voltage equipment: electrode material-dependent SF(6) decomposition

Sulfur hexafluoride is a chemically inert gas which is used in gas insulated substations (GIS) and other high-voltage equipment, leading to a significant enhancement of apparatus lifetime and reductions in installation size and maintenance requirements compared to conventional air insulated substations. However, component failures due to aging of the gas through electrical discharges may occur, and on-site monitoring for risk assessment is needed. Infrared spectroscopy was used for the analysis of gaseous by-products generated from electrical discharges in sulfur hexafluoride gas. An infrared monitoring system was developed using a micro-cell coupled to an FTIR spectrometer by silver halide fibers. Partial least-squares calibration was applied by using a limited number of optimally selected spectral variables. Emphasis was placed on the determination of main decomposition products, such as SOF(2), SOF(4), and SO(2)F(2). Besides the different electrical conditions, the material of the plane counter electrode of the discharge chamber was also varied between silver, aluminum, copper, tungsten, or tungsten/copper alloy. For the spark experiments the point electrode was the same material as chosen for the plane electrode, whereas for partial discharges a stainless steel needle was employed. Complementary investigations on the chemical composition within the solid counter electrode material by secondary neutral mass spectrometry (SNMS) were also carried out. Under sparking conditions, the electrode material plays an important role in the decomposition rates of the gas-phase, but no relevant material dependence could be observed under partial discharge conditions.     

Application of neural network calibrations to an halide ISE array

The Neural Network (NN) technique was applied to the calibration of an ion selective electrode (ISE) array comprising a bromide selective electrode, two chloride ISEs and one thiocyanate ISE. The measured samples were synthetic mixture solutions of chlorides and bromides in concentration ranges such that interference occurs. The NN method allowed to perform the calibration without estimating the coefficients of the Nikolskii-Eisenman theoretical relation. Only the determination of bromide was detailed. The results obtained using this method were better than those obtained using linear multivariate calibration methods.     

Interfacial and intrafacial linkage isomerizations of rhenium complexes with aromatic molecules

The mechanisms for the interconversion of facial diastereomers of a variety of TpRe(CO)(L)(eta(2)-L(Ar)) complexes [L = (t)BuNC, pyridine (py), PMe(3), or 1-methylimidazole (MeIm); L(Ar) = benzene, anisole, naphthalene, 1-methylpyrrole, furan, or thiophene; Tp = hydridotris(pyrazolyl)borate] have been investigated by (1)H NMR spin saturation experiments. In addition, the rates and free energies of activation for these processes were calculated from spin saturation experiments and T(1) measurements. The operative mechanisms for interconversion of the pi diastereomers were found to be nondissociative, undergoing either an interfacial or intrafacial linkage isomerization. A comparison of the kinetic parameters for isomerization of related eta(2)-olefin complexes of the [TpRe(CO)(PMe(3))] and [CpRe(NO)(PPh(3))](+) fragments is also presented.     

Molecular dynamics simulations of the mononuclear zinc-beta-lactamase from Bacillus cereus complexed with benzylpenicillin and a quantum chemical study of the reaction mechanism

Herein, we present results from MD simulations of the Michaelis complex formed between the B. cereus zinc-beta-lactamase enzyme and benzylpenicillin. The structural and dynamical effects induced by substrate-binding, the specific role of the conserved residues, and the near attack conformers of the Michaelis complex are discussed. Quantum chemical methods (HF/6-31G* and B3LYP/6-31G*) are also applied to study the hydrolysis reaction of N-methylazetidinone catalyzed by a monozinc system consisting of the side chains of the histidine residues (His86, His88, and His149) complexed with Zn-OH and the side chains of Asp90 and His210. From this model system, we built molecular-mechanics representations of the prereactive complex and transition state configurations docked into the active site. Linear-scaling semiempirical calculations coupled with a continuum solvent model were then performed on these static models. We propose that the experimental rate data for the B. cereus enzyme is compatible with a one-step mechanism for the hydrolysis of beta-lactam substrates in which His210 acts as a proton donor.     

Synthesis of 4,5-bifunctionally substituted imidazolidin-2-ones

It is shown that the reaction of readily available 4,5-dihydroxyimidazolidin-2-ones with hydrazoic or p-toluenesulfinic acid takes place stereo- and regioselectively and leads to the formation of 4,5-diazido- or 4,5-di(p-tolylsulfonyl)imidazolidin-2-ones. The example of 4,5-diazidoimidazolidin-2-one is used to demonstrate the possibility of using compounds of this type for stereoselective introduction of substituents into the 4 and 5 positions of the imidazole ring.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 12, pp. 1645–1649, December, 1993.     

Neutron activation for precise nuclear data

Techniques for extracting neutron flux parameters pertaining to the irradiation positions and nuclear data pertaining to the isotopes concemed from measured reaction rates have been developed. An adjustment procedure based on the generalized least squares method with incorporates the, evaluated literature nuclear data, estimates of flux parameters and the experimentally measured reaction rates using high resolution -ray spectrometry is applied. More precise values of the nuclear data, i.e., thermal neutron cross sections, resonance integrals and -ray emission probabilities are thus generated. The irradiation of a multi-element standard (MES) containing 24 elements is carried out in six diffieret positions in two diverse types of reactor in the UK and Russia. It is shown that the improvement in nuclear data is revelaed in moire than 90% of the cases.     

Enzyme catalysis in organic solvents: a promising field for optical biosensing

The ability of enzymes to work in non-aqueous media offers new and almost unexploited possibilities for the development of new optical biosensors. The advantages of performing biocatalytic reactions in non-aqueous media are discussed in relation to their possible application in optical biosensor design. Attention is focused on the factors that influence enzymatic catalysis in organic solvents, including the role of enzyme-associated water, criteria for solvent selection and the alteration of enzyme specificity. Recent examples of relevant applications and future prospects of organic-phase optical biosensing are discussed.     

Use of the hydroxyl radical and gel electrophoresis to study DNA structure

The hydroxyl radical has been used as a chemical probe to study in solution the structure of DNA and DNA-protein complexes. The hydroxyl radical abstracts a deoxyribose hydrogen atom, cleaving one strand of the DNA. The cutting pattern, visualized by separating the cleavage products using gel electrophoresis, shows the reactivity of each backbone position toward the radical. This method has been applied to studies of DNA bending and helical twist. Phased runs of adenines (adenine tracts) cause sequence-directed DNA bending. The hydroxyl radical cleavage of a bent DNA fragment containing short adenine tracts phased with the helix screw gives rise to an unusual cutting pattern. The hydroxyl radical cleavage rate decreases in the 5' to 3' direction along each adenine tract, with a minimum at the 3' end of each adenine tract. The cleavage of the matching thymine tract is similar, but the minimum in the pattern is offset in the 3' direction. This pattern on the autoradiograph of the gel is interpreted to indicate that bending is accompanied by a narrow minor groove in the DNA molecule. Furthermore, hydroxyl radical cleavage results in different cutting patterns for two similar sequences, (CGA4T4)5 and (CGT4A4)5, which have been shown to be bent and relatively straight, respectively. The hydroxyl radical method has also been used to determine the helical repeat of the metallothionein IIA gene to be about 10.5 base pairs per turn. Methods of optimizing the hydroxyl radical reaction for DNA-protein footprinting are discussed. Because individual gel bands give information about cutting frequency at particular positions in the backbone, gel resolution and clear autoradiographs are important to this work.(ABSTRACT TRUNCATED AT 250 WORDS)     

Synthesis and reactions of the transition metal substituted tin hydride HSn[Mo(CO)3C5H5]3

Reaction of HMo(CO)₃C₅H₅ and Sn(C₅H₅)₂ produces the tin hydride HSn[Mo(CO)₃C₅H₅]₃ (I). Reaction of I with CCl₄, CHCl₃, or CH₂Cl₂ gives ClSn[Mo(CO)₃C₅H₅]₃ (II). With hydrogen chloride the hydride I reacts to produce the dichloride Cl₂Sn[Mo(CO)₃C₅H₅]₂. The first step in this reaction is cleavage of the SnH bond to produce the chloride II. The hydride I reacts with acetic acid to produce the diacetate (CH₃COO)₂Sn[Mo(CO)₃C₅H₅]₂.