Multivariate optimization of a solid phase microextraction-headspace procedure for the determination of benzene, toluene, ethylbenzene and xylenes in effluent samples from a waste treatment plant

A method based on solid-phase microextraction (SPME) and gas chromatography with flame ionization detection (GC-FID) has been optimized for the determination of benzene, toluene, ethylbenzene and xylenes (BTEX) in water released from a waste treatment plant. The extraction step was optimized using fractional factorial and central composite designs including the following experimental factors: saline concentration; extraction time; desorption time; agitation velocity; headspace volume. A multiple function was used to describe the experimental conditions for simultaneous extraction of the compounds. The procedure, based on direct SPME at 50 degrees C, using a polydimethylsiloxane fiber, showed good linearity (r>0.997 over a concentration range 2-200 microg L(-1)) and repeatability (relative standard deviation (RSD)<4.23%) for all compounds, with limits of detection ranging from 0.05 to 0.28 microg L(-1), and limits of quantification ranging from 0.14 to 0.84 microg L(-1). Concentrations of the target compounds in these samples were between 145.8 and 1891 microg L(-1).     

Determination of selected non-authorized insecticides in peppers by liquid chromatography time-of-flight mass spectrometry and tandem mass spectrometry

In this work, two analytical methods based on liquid chromatography coupled to electrospray time-of-flight mass spectrometry (LC/ESI-TOFMS) and tandem mass spectrometry (LC/ESI-MS/MS) are described for the identification, confirmation and quantitation of three insecticides non-authorized in the European Union (nitenpyram, isocarbophos and isofenphos-methyl) but detected in recent monitoring programmes in pepper samples. The proposed methodologies involved a sample extraction procedure using liquid-liquid partition with acetonitrile followed by a cleanup step based on dispersive solid-phase extraction. Recovery studies performed on peppers spiked at different fortification levels (10 and 50 microg kg(-1)) yielded average recoveries in the range 76-100% with relative standard deviation (RSD) (%) values below 10%. Identification, confirmation and quantitation were carried out by LC/TOFMS and LC/MS/MS using a hybrid triple quadrupole linear ion trap (QqLIT) instrument in multiple-reaction monitoring (MRM) mode. The obtained limits of quantitation (LOQs) were in the range 0.1-5 microg kg(-1), depending on each individual technique. Finally, the proposed methods were successfully applied to the analysis of suspected pepper samples.     

Trace analysis of fumagillin in honey by liquid chromatography-diode array-electrospray ionization mass spectrometry

In this work a new liquid chromatography with diode array detection and electrospray ionization mass spectrometry (LC-DAD-ESI-MS) method has been developed for the determination of fumagillin residues in honey. This procedure involves a solid-phase extraction on polymeric cartridges for the isolation of fumagillin from diluted honey. Chromatographic separation of fumagillin was performed in isocratic mode, on a C(18) column (150 mm x 4.60mm i.d., 5 microm), the mobile phase consisted of a mixture of ammonium formate 20mM in water and acetonitrile (61/39, v/v), at 35 degrees C and the flow rate was set at 1.0 mL/min. Average analyte recoveries, influenced by the botanical origin were from 88 to 96% in replica sets of fortified honey samples. The detection limits of the LC-DAD-ESI-MS method were between 24 and 1 microg/kg for clear honeys (rosemary) and between 45 and 4 microg/kg for dark honeys (heather). The developed method has been applied to the analysis of fumagillin residues in honey samples collected from veterinary treated beehives, infected by Nosema ceranae and fed with the technical product at different doses.     

Comparative study of carbon nanotubes and C(60) fullerenes as pseudostationary phases in electrokinetic chromatography

The use of carbon nanostructures in different modalities is a topic of growing interest. This article provides a systematic comparison of surfactant-coated single-wall carbon nanotubes, multi-wall carbon nanotubes and C(60) fullerenes as pseudostationary phases (PSPs) in electrokinetic chromatography. The differences on the electrophoretic behaviour as a function of the pseudostationary phase for phenolic compounds, triazines and nitroimidazole derivatives have been explored. Phenolic compounds, triazines and nitroimidazole derivatives has been selected as model compounds of aromatic compounds, pi-exceeding heteroaromatic compounds and pi-deficient heteroaromatic compounds, respectively. Resolution was also evaluated on the basis of the differences in the electrophoretic behaviour and in this sense the best PSP for each group of compounds can be proposed.     

(S,S)-(+)-pseudoephedrine alpha-iminoglyoxylamide as a chiral glycine cation equivalent: a modular and flexible approach to enantioenriched alpha-amino ketones

We have studied the ability of an alpha-imino glyoxylamide derived from (S, S)-(+)-pseudoephedrine as a valuable chiral electrophile for the preparation of alpha-amino carbonyl compounds. In this context, the addition of Grignard reagents to the azomethine moiety of this chiral electrophile afforded the expected alpha-amino amide adducts in good yields and diastereoselectivities. Moreover, these adducts have been transformed into enantioenriched alpha-amino ketones by exploiting the ability of pseudoephedrine amides to undergo selective monoaddition to the carbamoyl group with organolithium reagents.     

Ultrafast excited state dynamics controlling photochemical isomerization of N-methyl-4-[trans-2-(4-pyridyl)ethenyl]pyridinium coordinated to a {Re I(CO)3(2,2'-bipyridine)} chromophore

Two multifunctional photoactive complexes [Re(Cl)(CO)(3)(MeDpe(+))(2)](2+) and [Re(MeDpe(+))(CO)(3)(bpy)](2+) (MeDpe(+)=N-methyl-4-[trans-2-(4-pyridyl)ethenyl]pyridinium, bpy=2,2'-bipyridine) were synthesized, characterized, and their redox and photonic properties were investigated by cyclic voltammetry; ultraviolet-visible-infrared (UV/Vis/IR) spectroelectrochemistry, stationary UV/Vis and resonance Raman spectroscopy; photolysis; picosecond time-resolved absorption spectroscopy in the visible and infrared regions; and time-resolved resonance Raman spectroscopy. The first reduction step of either complex occurs at about -1.1 V versus Fc/Fc(+) and is localized at MeDpe(+). Reduction alone does not induce a trans-->cis isomerization of MeDpe(+). [Re(Cl)(CO)(3)(MeDpe(+))(2)](2+) is photostable, while [Re(MeDpe(+))(CO)(3)(bpy)](2+) and free MeDpe(+) isomerize under near-UV irradiation. The lowest excited state of [Re(Cl)(CO)(3)(MeDpe(+))(2)](2+) has been identified as the Re(Cl)(CO)(3)-->MeDpe(+ 3)MLCT (MLCT=metal-to-ligand charge transfer), decaying directly to the ground state with lifetimes of approximately 42 (73 %) and approximately 430 ps (27 %). Optical excitation of [Re(MeDpe(+))(CO)(3)(bpy)](2+) leads to population of Re(CO)(3)-->MeDpe(+) and Re(CO)(3)-->bpy (3)MLCT states, from which a MeDpe(+) localized intraligand (3)pipi* excited state ((3)IL) is populated with lifetimes of approximately 0.6 and approximately 10 ps, respectively. The (3)IL state undergoes a approximately 21 ps internal rotation, which eventually produces the cis isomer on a much longer timescale. The different excited-state behavior of the two complexes and the absence of thermodynamically favorable interligand electron transfer in excited [Re(MeDpe(+))(CO)(3)(bpy)](2+) reflect the fine energetic balance between excited states of different orbital origin, which can be tuned by subtle structural variations. The complex [Re(MeDpe(+))(CO)(3)(bpy)](2+) emerges as a prototypical, multifunctional species with complementary redox and photonic behavior.     

Theoretical and electrochemical studies on organometallic symmetrical schiff base complexes of Zn(II), Cu(II), Ni(II) and Co(II)

The electronic communication between two redox centres through a Schiff base complex has been investigated in a series of ethylenediimine-bis(1-ferrocenyl-1,3-butanedionate) complexes of Zn(II) 1, Cu(II) 2, Ni(II) 3 and Co(II) 4. Cyclic voltammetry experiments of 1 and 2 exhibit a unique two-electron reversible oxidation wave, whereas in the case of 3 and 4 two and three one-electron oxidation processes are, respectively, observed. These results suggest some electronic interaction between the iron atoms of the ferrocenyl groups. DFT calculations carried out on model complexes show that for all the studied compounds the removal of the first two electrons corresponds to the oxidation processes of the iron centres in the weakly coupled ferrocenyl termini. The electronic communication between the two iron centres increases on going from 1 to 4. Finally, a re-indexation of the bands observed in the UV-Visible spectra has been carried out using TDDFT calculations.     

Processing Parameters Matching Effects upon Rhizobium tropici Biopolymers’ Rheological Properties

The combined effects of the processing parameters upon rheological properties of biopolymers produced by Rhizobium tropici were studied as a function of the Ca(+2) ions' concentration variation, yeast extract concentration added to the medium, aeration, and agitation, maintaining the mannitol concentration in 10 g/L. The experiments were carried out using a fermenter with 20-L capacity as a reactor. All processing parameters were monitored online. The temperature [(30 +/- 1) degrees C] and pH values (7.0) were kept constant throughout the experimental time. As a statistical tool, a complete 2(3) factorial design with central point and response surface was used to investigate the interactions between relevant variables of the fermentation process: calcium carbonate concentration, yeast extract concentration, aeration, and agitation. The processing parameter setup for reaching the maximum response for rheological propriety production was obtained when applying mannitol concentration of 10.0 g/L, calcium carbonate concentration 1.0 g/L, yeast extract concentration 1.0 g/L, aeration 1.30 vvm, and agitation 800 rpm. The viscosimetric investigation of polysaccharide solutions exposed their shear-thinning behavior and polyelectrolytic feature.     

CrCl2-promoted stereospecific and stereoselective alkyl- and silylcyclopropanation of alpha,beta-unsaturated amides

An efficient chromium-promoted alkyl- or silylcyclopropanation of alpha,beta-unsaturated amides is described. These reactions can be carried out on (E)- or (Z)-alpha,beta-enamides in which the C-C double bond is di-, or trisubstituted. This process takes place with total stereospecificity and the new stereogenic center is generated with high or total stereoselectivity. Some synthetic applications of the obtained silylcyclopropyl amides are also reported. Two mechanisms based on the generation of carbenoid or carbene complexes have been proposed to explain this cyclopropanation reaction.     

Re-entrant nematic behavior in the 7OCB+9OCB mixtures: evidence for multiple nematic-smectic tricritical points

The metastable phase diagram of the two-component system heptyloxycyanobiphenyl (7OCB)+nonyloxycyanobiphenyl (9OCB) was determined by means of modulated differential scanning calorimetry (MDSC) and optical microscopy measurements. It was experimentally established that the 7OCB+9OCB two-component system exhibits a monotropic re-entrant nematic behavior. A complete quantitative thermodynamic analysis, through Oonk's equal G analysis, was performed, allowing for the calculation of the monotropic re-entrant behavior and the prediction of two tricritical points, one of them experimentally accessible for the SmAd-to-N transition and the other non-experimentally accessible for the RN-to-SmAd transition. From specific-heat measurements, latent heats were obtained for those mixtures displaying a first-order SmAd-to-N transition. Additionally, for some mixtures, the specific-heat critical exponents (alpha), through the second-order SmAd-to-N transition, were obtained. Both batches of data enable us to access to the experimental tricritical temperature for the SmAd-to-N transition.