A note on the second problem of Stokes for Maxwell fluids

New exact solutions corresponding to the second problem of Stokes for Maxwell fluids have been established by means of Laplace transforms. For large times, these solutions reduce to the well-known steady-state solutions which are periodic in time and independent of the initial conditions. Furthermore, the transient solutions are in accordance with the previous solutions obtained using the Fourier sine transform. The required time to get the steady-state is determined by graphical illustrations. This time decreases if the frequency of the velocity increases. The effects of the material parameters on the decay of the transients in time are also investigated by graphs.     

Ternary and binary copper(II) complexes: synthesis,characterization, ROS-inductive,proteasome inhibitory,and anticancer properties

Three ternary copper(II) complexes, [Cu(phen)(L-phe)Cl]·2H₂O, [Cu(phen)(L-leu)Cl]·4½H₂O, and [Cu(phen)(L-tyr)Cl]·3H₂O, and four binary copper(II) complexes, [Cu(phen)Cl₂]_, Cu(L-phe)₂·½H₂O, Cu(L-leu)₂·½H₂O, and Cu(L-tyr)₂·H₂O (where phen = 110-phenanthroline, L-phe = L-phenylalanine, L-tyr = L-tyrosine, L-leu = L-leucine and Cl^- = chloride), were synthesized and characterized by elemental analysis, spectroscopic techniques (FTIR, UV–visible, fluorescence spectroscopy), magnetic susceptibility, molar conductivity, and lipophilicity measurement. X-ray diffraction determination of a single crystal of [Cu(phen)(L-tyr)Cl] showed two independent molecules in the asymmetric unit, each with the same distorted square pyramidal geometry about copper(II). p-Nitrosodimethylaniline assay revealed that the three ternary complexes were better inducers of reactive oxygen species over time than binary complexes, CuCl₂, and free ligands. All the copper(II) complexes in this series inhibited the three proteolytic activities in the order Trypsin-like > Caspase-like > Chymotrypsin-like. In terms of anticancer properties, the copper(II)-phen complexes had GI50 values of less than 4 μM against MCF-7, HepG2, CNE1 and A549 cancer cell lines, more potent than cisplatin.     

Statefinder diagnostic and stability of modified gravity consistent with holographic and agegraphic dark energy

Recently one of us derived the action of modified gravity consistent with the holographic and new-agegraphic dark energy. In this paper, we investigate the stability of the Lagrangians of the modified gravity as discussed in (Setare in Int J Mod Phys D 17:2219, 2008; Setare in Astrophys Space Sci 326:27, 2010). We also calculate the statefinder parameters which classify our dark energy model.     

Restoring New Agegraphic Dark Energy in RS II Braneworld

Motivated by recent works (Saridakis in Phys. Lett. B 660:138, 2008; Sheykhi in Int. J. Mod. Phys. D 19(3):305, 2010), we investigate the new agegraphic model of dark energy in the framework of RS II braneworld. We also include the case of variable gravitational constant G in our model. Moreover, we reconstruct the potential and the dynamics of the quintessence, tachyon, K-essence and dilaton scalar field models according to the evolutionary behavior of the new agegraphic dark energy model in RS II braneworld cosmology including varying G.     

A study of the effect of laser beam geometries on laser bending of sheet metal by buckling mechanism

Laser beam forming has emerged as a new and very promising technique to form sheet metal by thermal residual stresses. The objective of this work is to investigate numerically the effect of rectangular beam geometries, with different transverse width to length aspect ratio, on laser bending process of thin metal sheets, which is dominated by buckling mechanism. In this paper, a comprehensive thermal and structural finite element (FE) analysis is conducted to investigate the effect that these laser beam geometries have on the process and on the final product characteristics. To achieve this, temperature distributions, deformations, plastic strains, stresses, and residual stresses produced by different beam geometries are compared. The results suggest that beam geometries play an important role in the resulting temperature distributions on the workpiece. Longer beam dimensions in the scanning direction (in relation to its lateral dimension) produce higher temperatures due to longer beam–material interaction time. This affects the bending direction and the magnitude of the bending angles. Higher temperatures produce more plastic strains and hence higher deformation. This shows that the temperature-dependent yield stress plays a more dominant role in the deformation of the plate than the spread of the beam in the transverse direction. Also, longer beams have a tendency for the scanning line to curve away from its original position to form a concave shape. This is caused by buckling which develops tensile plastic strains along both ends of the scanning path. The buckling effect produces the opposite curve profile; convex along the tranverse direction and concave along the scanning path.     

Synthesis and characterization of Mg-doped ZnO hollow spheres

Mg-doped ZnO nanoparticles were synthesized by a simple chemical method at low temperature with Mg:Zn atomic ratio from 0 to 7%. The synthesis process is based on the hydrolysis of zinc acetate dihydrate and magnesium acetate tetrahydrate were heated under refluxing at 65 °C using methanol as a solvent. X-ray diffraction analysis reveals that the Mg-doped ZnO crystallizes in a wurtzite structure with crystal size of 5–12 nm. These nanocrystals self-aggregated themselves into hollow spheres of size of 800–1100 nm. High resolution transmission electron microscopy images show that each sphere is made up of numerous nanoparticles of average diameter 5–11 nm. The XRD patterns, SEM and TEM micrographs of doping of Mg in ZnO confirmed the formation of hollow spheres indicating that the Mg²⁺ is successfully substituted into the ZnO host structure of the Zn²⁺ site. Furthermore, the UV–Vis spectra and photoluminescence (PL) spectra of the ZnO nanoparticles were also investigated. The band gap of the nanoparticles can be tuned in the range of 3.36–3.55 eV by the use of the dopants.     

Dynamical effects of QCD in q2$ \bar{{q}}^{{2}}_{}$ systems

We study the coupling of a tetraquark system to an exchanged meson-meson channel, using a pure gluonic theory based four-quark potential matrix model which is known to fit well a large number of data points for lattice simulations of different geometries of a four-quark system. We find that if this minimal-area-based potential matrix replaces the earlier used simple Gaussian form for the gluon field overlap factor f in its off-diagonal terms, the resulting T -matrix and phase shifts develop an angle dependence whose partial-wave analysis reveals D wave and higher angular-momentum components in it. In addition to the obvious implications of this result for the meson-meson scattering, this new feature indicates the possibility of orbital excitations influencing properties of meson-meson molecules through a polarization potential. We have used a formalism of the resonating group method, treated kinetic energy and overlap matrices on model of the potential matrix, but decoupled the resulting complicated integral equations through the Born approximation. In this exploratory study we have used a quadratic confinement and not included the spin dependence; we also used the approximation of equal constituent quark masses.     

A Note on Classification of Cylindrically Symmetric Non-static Space–Times According to Their Teleparallel Killing Vector Fields in the Teleparallel Theory of Gravitation

In this paper, we explored the conservation laws of cylindrically symmetric non-static space–times by using direct integration technique. This classification also covers non-static plane symmetric space–times, static cylindrically symmetric space–times and plane symmetric static space–times. In this paper, we will only present the results of non-static cylindrically symmetric and non-static plane symmetric space–times. The results of static cylindrically symmetric space–times and plane static space–times can be found in Shabbir and Khan (Mod Phys Lett A 25:525, 2010). It turns out that the non-static cylindrically symmetric space–times admit four, five, or seven conservation laws. It is important to note that the above space–times admit at least one or at the most four extra conservation laws.     

Role of cleaning methods on bond quality of Ti coated glass/imidex system

Thin film materials are widely used in the fabrication of semiconductor microelectronic devices. In thin film deposition, cleanliness of substrate surface have become critically important as over 50% of yield losses in integrated circuit fabrication are caused by microcontamination [1]. There are many wafer cleaning techniques. The most successful approach for silicon wafer cleaning technique is RCA clean [2]. But for glass substrate it is still not known which procedure of cleaning is the best. This paper provides an understanding of the right way of glass wafer cleaning method, with a focus towards identifying good bond strength. Two wafer cleaning techniques have been used for cleaning glass substrates in the context of laser micro-joining of dissimilar substrates. First cleaning procedure involves two steps, first cleaning in acetone solution and then in DI water solution. After each step dried with N₂. Second cleaning procedure involves four steps, first cleaning with 1% Alconox solution, second in DI water, third in acetone solution and finally in a methanol solution and dried with N₂ after each step. Deposition of Ti thin film on top of these two types of substrate using DC magnetron sputtering method also showed better adhesion of Ti film on glass for the second type of cleaning method. Scanning electron microscopy (SEM) analyses of the lap shear tested failed surfaces for these two kinds of samples revealed strong bond for samples prepared by second cleaning method compared to first cleaning method. Characterization of these two sets of samples using X-ray photoelectron spectroscopy (XPS) has shown excellent contamination removal for the second cleaning method. This modification is believed to be due to reduction of carbon contamination.